Generator inertia has great influence on interarea oscillation frequency and damping.

机组惯量对区域振荡频率和阻尼有着较响。

The unit is composed of hydraulic and double conic placing,hydraulic spading and drawing ,straightening,shearing,end stopping,coiling,feeding,dropping cart,ect.

本机组有液压,双锥放料,液压铲头引头,送料,校直,剪切,阻尼,收卷,上料,下料小车等主要部件组成.

The results show that, the receptance model is very stitable for local modification and analysis of structures.

根据导纳分析结果，可以寻找阻尼单元最优位置，对结构进行局部修改。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业平缝机伞齿轮代替钢质齿轮。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流对圆盘阻尼与圆盘面表面特性相关。

An overdamped system is assumed when the bubble burst, meaning the land's value did not go down to below 1 dollar.

当泡沫破裂时候就有可能产生一个过阻尼系统，意思就是土地价值不会跌到小于1元钱。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析阻尼力与振动速度、外加电场强度、充气压力等数学关系，为减振器设计参数优化研究提论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘系统在不同耦合强度、失谐程度、粘性阻尼系数、干摩擦强度等系统参数响下受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变阻尼控制由于在装置中附加阻尼，可以取得比变刚度控制更为有效减震控制效果。

In order to study the influence of structural parameters on the optimal normal load, a microslip model was used to formulate the nonlinear dry friction force.

摘要为研究阻尼结构参数对阻尼叶片最优正压力响，基于微滑移模型，推导出阻尼器非线性干摩擦阻尼力计算公式。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和阻尼比是位置深度和剪应变函数，导出剪切波在土中传播波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域振荡频率和阻尼有着较大的影响。

The unit is composed of hydraulic and double conic placing,hydraulic spading and drawing ,straightening,shearing,end stopping,coiling,feeding,dropping cart,ect.

本机组有液压,双锥放料,液压铲头引头,送料,校直,剪切,阻尼,收卷,上料,下料小车等主要部件组成.

The results show that, the receptance model is very stitable for local modification and analysis of structures.

根据导纳分析结果，可以寻找阻尼单元的最优位置，对结构进行局部修改。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业机伞齿轮代替钢质齿轮。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流对圆盘的阻尼与圆盘的表相关。

An overdamped system is assumed when the bubble burst, meaning the land's value did not go down to below 1 dollar.

当泡沫破裂的时候就有可能产生一个过阻尼系统，意思就是土地的价值不会跌到小于1元钱。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了阻尼力与振动速度、外加电场强度、充气压力等的数学关系，为减振器设计参数的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘系统在不同的耦合强度、失谐程度、粘阻尼系数、干摩擦强度等系统参数影响下的受迫响应。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变阻尼控制由于在装置中附加了阻尼，可以取得比变刚度控制更为有效的减震控制效果。

In order to study the influence of structural parameters on the optimal normal load, a microslip model was used to formulate the nonlinear dry friction force.

摘要为了研究阻尼结构参数对阻尼叶片最优正压力的影响，基于微滑移模型，推导出了阻尼器非线干摩擦阻尼力的计算公式。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和阻尼比是位置深度和剪应变的函数，导出剪切波在土中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域振荡频率和阻有着较大的影响。

The unit is composed of hydraulic and double conic placing,hydraulic spading and drawing ,straightening,shearing,end stopping,coiling,feeding,dropping cart,ect.

本机组有液压,双锥放料,液压铲头引头,送料,校直,剪切,阻,收卷,上料,下料小车等主要部件组成.

The results show that, the receptance model is very stitable for local modification and analysis of structures.

根据导纳分析结果，可以寻找阻单元的最优位置，对结构进行局部修改。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻合金材料制作工业平缝机伞齿轮代替钢质齿轮。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流对圆盘的阻与圆盘面的表面特性相关。

An overdamped system is assumed when the bubble burst, meaning the land's value did not go down to below 1 dollar.

当泡沫破裂的时候就有可能产生一个过阻统，意思就是土地的价值不会跌到小于1元钱。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了阻力与振动速度、外加电场强度、充气压力等的学关，为减振器设计参的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘统在不同的耦合强度、失谐程度、粘性阻、干摩擦强度等统参影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变阻控制由于在装置中附加了阻，可以取得比变刚度控制更为有效的减震控制效果。

In order to study the influence of structural parameters on the optimal normal load, a microslip model was used to formulate the nonlinear dry friction force.

摘要为了研究阻结构参对阻叶片最优正压力的影响，基于微滑移模型，推导出了阻器非线性干摩擦阻力的计算公式。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和阻比是位置深度和剪应变的函，导出剪切波在土中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域荡频率和阻尼有着较大的影响。

The unit is composed of hydraulic and double conic placing,hydraulic spading and drawing ,straightening,shearing,end stopping,coiling,feeding,dropping cart,ect.

本机组有,双锥放,铲头引头,送,校直,剪切,阻尼,收卷,上,下小车等主要部件组成.

The results show that, the receptance model is very stitable for local modification and analysis of structures.

根据导纳分析结果，可以寻找阻尼单元的最优位置，对结构进行局部修改。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材制作工业平缝机伞齿轮代替钢质齿轮。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流对圆盘的阻尼与圆盘面的表面特性相关。

An overdamped system is assumed when the bubble burst, meaning the land's value did not go down to below 1 dollar.

当泡沫破裂的时候就有可能产生一个过阻尼系统，意思就是土地的价值不会跌到小于1元钱。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了阻尼力与动速度、外加电场强度、充气力等的数学关系，为设计参数的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘系统在不同的耦合强度、失谐程度、粘性阻尼系数、干摩擦强度等系统参数影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变阻尼控制由于在装置中附加了阻尼，可以取得比变刚度控制更为有效的震控制效果。

In order to study the influence of structural parameters on the optimal normal load, a microslip model was used to formulate the nonlinear dry friction force.

摘要为了研究阻尼结构参数对阻尼叶片最优正力的影响，基于微滑移模型，推导出了阻尼非线性干摩擦阻尼力的计算公式。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和阻尼比是位置深度和剪应变的函数，导出剪切波在土中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域振荡频率和阻尼有着较大的影响。

The unit is composed of hydraulic and double conic placing,hydraulic spading and drawing ,straightening,shearing,end stopping,coiling,feeding,dropping cart,ect.

本机组有液压,双锥放料,液压铲头引头,送料,校直,剪切,阻尼,收卷,上料,下料小车等主要部件组成.

The results show that, the receptance model is very stitable for local modification and analysis of structures.

根据导纳分析结果，可以寻找阻尼单元的最优位置，对结构进行局部修改。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业平缝机伞替钢质。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流对的阻尼与的表特性相关。

An overdamped system is assumed when the bubble burst, meaning the land's value did not go down to below 1 dollar.

当泡沫破裂的时候就有可能产生一个过阻尼系统，意思就是土地的价值不会跌到小于1元钱。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了阻尼力与振动速度、外加电场强度、充气压力等的数学关系，为减振器设计参数的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶系统在不同的耦合强度、失谐程度、粘性阻尼系数、干摩擦强度等系统参数影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变阻尼控制由于在装置中附加了阻尼，可以取得比变刚度控制更为有效的减震控制效果。

In order to study the influence of structural parameters on the optimal normal load, a microslip model was used to formulate the nonlinear dry friction force.

摘要为了研究阻尼结构参数对阻尼叶片最优正压力的影响，基于微滑移模型，推导出了阻尼器非线性干摩擦阻尼力的计算公式。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和阻尼比是位置深度和剪应变的函数，导出剪切波在土中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯域振荡频率和阻尼有着较大的影响。

The unit is composed of hydraulic and double conic placing,hydraulic spading and drawing ,straightening,shearing,end stopping,coiling,feeding,dropping cart,ect.

本机组有液压,双锥放料,液压铲头引头,送料,校直,剪切,阻尼,收卷,上料,下料小车等主要部件组成.

The results show that, the receptance model is very stitable for local modification and analysis of structures.

根据导纳分析结果，可以寻找阻尼单元的最优位置，结构进行局部修改。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业平缝机伞齿轮代替钢质齿轮。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流圆盘的阻尼与圆盘面的表面特性相关。

An overdamped system is assumed when the bubble burst, meaning the land's value did not go down to below 1 dollar.

当泡沫破裂的时候就有可能产生一个过阻尼系统，意思就是土地的价值会跌到小于1元钱。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了阻尼力与振动速度、外加电场强度、充气压力等的数学关系，为减振器设计参数的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘系统的耦合强度、失谐程度、粘性阻尼系数、干摩擦强度等系统参数影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变阻尼控制由于装置中附加了阻尼，可以取得比变刚度控制更为有效的减震控制效果。

In order to study the influence of structural parameters on the optimal normal load, a microslip model was used to formulate the nonlinear dry friction force.

摘要为了研究阻尼结构参数阻尼叶片最优正压力的影响，基于微滑移模型，推导出了阻尼器非线性干摩擦阻尼力的计算公式。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

连续梯度土介质模型中，剪切模和阻尼比是位置深度和剪应变的函数，导出剪切波土中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区频率和阻尼有着较大的影响。

The unit is composed of hydraulic and double conic placing,hydraulic spading and drawing ,straightening,shearing,end stopping,coiling,feeding,dropping cart,ect.

本机组有液压,双锥放料,液压铲头引头,送料,校直,剪切,阻尼,收卷,上料,下料小车等主要部件组成.

The results show that, the receptance model is very stitable for local modification and analysis of structures.

根据导纳分析结果，可以寻找阻尼单元的最优位置，对结构进行局部修改。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业平缝机伞齿轮代替钢质齿轮。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流对圆的阻尼与圆面的表面特性相关。

An overdamped system is assumed when the bubble burst, meaning the land's value did not go down to below 1 dollar.

当泡沫破裂的时候就有可能产生一个过阻尼，意思就是土地的价值不会跌到小于1元钱。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了阻尼力与动速度、外加电场强度、充气压力等的数学关，为减器设计参数的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶在不同的耦合强度、失谐程度、粘性阻尼数、干摩擦强度等参数影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变阻尼控制由于在装置中附加了阻尼，可以取得比变刚度控制更为有效的减震控制效果。

In order to study the influence of structural parameters on the optimal normal load, a microslip model was used to formulate the nonlinear dry friction force.

摘要为了研究阻尼结构参数对阻尼叶片最优正压力的影响，基于微滑移模型，推导出了阻尼器非线性干摩擦阻尼力的计算公式。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和阻尼比是位置深度和剪应变的函数，导出剪切波在土中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域振荡频率和阻尼有着较大的影响。

The unit is composed of hydraulic and double conic placing,hydraulic spading and drawing ,straightening,shearing,end stopping,coiling,feeding,dropping cart,ect.

本机组有液压,双锥放料,液压铲头引头,送料,校直,剪切,阻尼,收卷,上料,下料小车等主要部件组成.

The results show that, the receptance model is very stitable for local modification and analysis of structures.

根据导纳分析结果，可以寻找阻尼单元的最优位置，对结构进行局部修改。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业平缝机伞齿钢质齿。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流对的阻尼面的表面特性相关。

An overdamped system is assumed when the bubble burst, meaning the land's value did not go down to below 1 dollar.

当泡沫破裂的时候就有可能产生一个过阻尼系统，意思就是土地的价值不会跌到小于1元钱。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了阻尼力振动速度、外加电场强度、充气压力等的数学关系，为减振器设计参数的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶系统在不同的耦合强度、失谐程度、粘性阻尼系数、干摩擦强度等系统参数影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

变刚度控制相比，变刚度变阻尼控制由于在装置中附加了阻尼，可以取得比变刚度控制更为有效的减震控制效果。

In order to study the influence of structural parameters on the optimal normal load, a microslip model was used to formulate the nonlinear dry friction force.

摘要为了研究阻尼结构参数对阻尼叶片最优正压力的影响，基于微滑移模型，推导出了阻尼器非线性干摩擦阻尼力的计算公式。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和阻尼比是位置深度和剪应变的函数，导出剪切波在土中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组惯量对区域振荡频率和阻尼有着较大影响。

The unit is composed of hydraulic and double conic placing,hydraulic spading and drawing ,straightening,shearing,end stopping,coiling,feeding,dropping cart,ect.

本机组有液压,双锥放,液压铲引,,校直,剪切,阻尼,收卷,上,下小车等主要部件组成.

The results show that, the receptance model is very stitable for local modification and analysis of structures.

根据导纳分析结果，可以寻找阻尼单元最优位置，对结构进行局部修改。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材制作工业平缝机伞齿轮代替钢质齿轮。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流对圆盘阻尼与圆盘面表面特性相关。

An overdamped system is assumed when the bubble burst, meaning the land's value did not go down to below 1 dollar.

当泡沫破裂时候就有可能产生一个过阻尼系统，意思就是土地价值不会跌到小于1元钱。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了阻尼力与振动速度、外加电场强度、充气压力等关系，为减振器设计参优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘系统在不同耦合强度、失谐程度、粘性阻尼系、干摩擦强度等系统参影响下受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变阻尼控制由于在装置中附加了阻尼，可以取得比变刚度控制更为有效减震控制效果。

In order to study the influence of structural parameters on the optimal normal load, a microslip model was used to formulate the nonlinear dry friction force.

摘要为了研究阻尼结构参对阻尼叶片最优正压力影响，基于微滑移模型，推导出了阻尼器非线性干摩擦阻尼力计算公式。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和阻尼比是位置深度和剪应变函，导出剪切波在土中传播波动方程。