Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采用丁腈、羧基丁腈、丁苯、丁吡四种胶乳改酚醛树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚醛树脂基活炭方法、及应用进展和主要研究方向。

The technique for preparing phenol formaldehyde resin from phenolated wood (PWF) and its characters were studied and analyzed.

本文研究了用酚化木酚醛树脂技术,并对进行分析。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂主要成份之一,它结构及合成工艺条件决定了该类粘合剂。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲醛在碱条件下经加成、缩合得可发酚醛树脂，该树脂和表面活剂、发泡剂、固化剂一起发泡即得酚醛泡沫塑料。

It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.

结果表明热固酚醛树脂固化过程,首先是羟甲基发生缩合反应,缩合反应形成醚键是主要。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采用丁腈、羧基丁腈、丁苯、丁吡四种胶乳改性酚。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚基活性炭制备方法、性能及其应用进展和主要研究方向。

The technique for preparing phenol formaldehyde resin from phenolated wood (PWF) and its characters were studied and analyzed.

本文研究了用酚化木材制备酚,对其性能进行分析。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚是铸造用聚氨酯粘合剂主要成份之一,它结构及合成工艺条件决定了该类粘合剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲在碱性条件下经加成、缩合制得可发性酚，该和表面活性剂、发泡剂、固化剂一起发泡即得酚泡沫塑料。

It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.

结果表明热固性酚固化过程,首先是羟甲基发生缩合反应,缩合反应形成醚键是主要。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采用丁腈、羧基丁腈、丁苯、丁吡四种胶乳改性酚醛树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚醛树脂基活性炭制备方法、性能及其应用主要研究方向。

The technique for preparing phenol formaldehyde resin from phenolated wood (PWF) and its characters were studied and analyzed.

本文研究了用酚化木材制备酚醛树脂技术,并对其性能行分析。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用粘合剂主要成份之一,它结构及合成工艺条件决定了该类粘合剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲醛在碱性条件下经加成、缩合制得可发性酚醛树脂，该树脂表面活性剂、发泡剂、固化剂一起发泡即得酚醛泡沫塑料。

It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.

结果表明热固性酚醛树脂固化过程,首先是羟甲基发生缩合反应,缩合反应形成醚键是主要。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采丁腈、羧基丁腈、丁苯、丁吡四种胶乳改性酚醛树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚醛树脂基活性炭制备方法、性能及其展和主要研究方向。

The technique for preparing phenol formaldehyde resin from phenolated wood (PWF) and its characters were studied and analyzed.

本文研究了酚化木材制备酚醛树脂技术,并对其性能行分析。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造聚氨剂主要成份之一,它结构及成工艺条件决定了该类剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲醛在碱性条件下经加成、缩制得可发性酚醛树脂，该树脂和表面活性剂、发泡剂、固化剂一起发泡即得酚醛泡沫塑料。

It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.

结果表明热固性酚醛树脂固化过程,首先是羟甲基发生缩反,缩反形成醚键是主要。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采用丁腈、羧基丁腈、丁苯、丁吡四种胶乳改性树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了树脂基活性炭制备方法、性能及其应用进展和主要究方向。

The technique for preparing phenol formaldehyde resin from phenolated wood (PWF) and its characters were studied and analyzed.

究了用化木材制备树脂技术,并对其性能进行分析。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚树脂是铸造用聚氨酯粘合剂主要成份之一,它结构及合成工艺条件决定了该类粘合剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯与甲在碱性条件下经加成、缩合制得可发性树脂，该树脂和表面活性剂、发泡剂、固化剂一起发泡即得泡沫塑料。

It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.

结果表明热固性树脂固化过程,首先是羟甲基发生缩合反应,缩合反应形成醚键是主要。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采用丁腈、羧基丁腈、丁苯、丁吡四种胶乳改性酚。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚基活性炭制备方法、性能及其应用进展和主要研究方向。

The technique for preparing phenol formaldehyde resin from phenolated wood (PWF) and its characters were studied and analyzed.

本文研究了用酚化木材制备酚技术,并对其性能进行分析。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚是铸造用聚氨酯粘剂主要份之一,它结构及艺条件决定了该类粘剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲在碱性条件下经加、缩制得可发性酚，该和表面活性剂、发泡剂、固化剂一起发泡即得酚泡沫塑料。

It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.

结果表明热固性酚固化过程,首先是羟甲基发生缩反应,缩反应形醚键是主要。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采用丁腈、羧基丁腈、丁苯、丁吡四种胶乳改性酚醛树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚醛树脂基活性炭制备方法、性能用进展和主要研究方向。

The technique for preparing phenol formaldehyde resin from phenolated wood (PWF) and its characters were studied and analyzed.

本文研究了用酚化木材制备酚醛树脂技术,并对性能进行分析。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘主要成份之一,它结构成工艺条件决定了该类粘性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲醛在碱性条件下经加成、缩制得可发性酚醛树脂，该树脂和表面活性、发泡、固化一起发泡即得酚醛泡沫塑料。

It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.

结果表明热固性酚醛树脂固化过程,首先是羟甲基发生缩反,缩反形成醚键是主要。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采用丁腈、羧基丁腈、丁苯、丁吡四种胶乳改性酚醛树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚醛树脂基活性炭方法、性能及其应用进展和主要研究方向。

The technique for preparing phenol formaldehyde resin from phenolated wood (PWF) and its characters were studied and analyzed.

本文研究了用酚化木材酚醛树脂技术,并对其性能进行分析。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂主要成份,结构及合成工艺条件决定了该类粘合剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲醛在碱性条件下经加成、缩合得可发性酚醛树脂，该树脂和表面活性剂、发泡剂、固化剂起发泡即得酚醛泡沫塑料。

It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.

结果表明热固性酚醛树脂固化过程,首先是羟甲基发生缩合反应,缩合反应形成醚键是主要。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采用丁腈、羧基丁腈、丁苯、丁吡四种胶乳改性酚醛树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚醛树脂基活性炭制备方法、性能及其应用进展和主要研究方向。

The technique for preparing phenol formaldehyde resin from phenolated wood (PWF) and its characters were studied and analyzed.

本文研究了用酚化木材制备酚醛树脂技术,并对其性能进行分析。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂主要成份之一,它结构及合成工艺条件决定了该类粘合剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲醛在碱性条件下经加成、缩合制性酚醛树脂，该树脂和表面活性剂、泡剂、固化剂一起泡即酚醛泡沫塑料。

It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.

结果表明热固性酚醛树脂固化过程,首先是羟甲基生缩合反应,缩合反应形成醚键是主要。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采丁腈、羧基丁腈、丁苯、丁吡四种胶乳改性酚醛树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚醛树脂基活性炭制备方法、性能及其展和主要研究方向。

The technique for preparing phenol formaldehyde resin from phenolated wood (PWF) and its characters were studied and analyzed.

本文研究了酚化木材制备酚醛树脂技术,并对其性能行分析。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造聚氨剂主要成份之一,它结构及成工艺条件决定了该类剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲醛在碱性条件下经加成、缩制得可发性酚醛树脂，该树脂和表面活性剂、发泡剂、固化剂一起发泡即得酚醛泡沫塑料。

It was shown that the curing process of resoles, at first, proceeded by condensation reaction of methylol groups, and the formation of dimethylene ether linkage was predominant.

结果表明热固性酚醛树脂固化过程,首先是羟甲基发生缩反,缩反形成醚键是主要。