Let's get the lathe to turn the new piston.

咱用车车[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽车修理厂那边传来德里克开动车的声。

They showed keen interest in the various lathes on exhibition.

对展出中的各类车表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式车，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

对C7620-11夹盘多刀半自动车的改进,扩大了加工种类,提高了自动化程度,使其成为一台简易型数控车。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

对凸轮加工程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原车主轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 对C7620-11夹盘多刀半自动车的改进，扩大了加工种类，提高了自动化程度，使其成为一台简易型数控车。

Let's get the lathe to turn the new piston.

咱们用车床车[加]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽车修理厂那边传来德里车床的声音。

They showed keen interest in the various lathes on exhibition.

他们对展出中的各类车床表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式车床，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘多刀半自车床的改进,扩大了加种类,提高了自化度,使其成为一台简易型数控车床。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对凸轮加的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原车床主轴支撑滑轴承轴瓦严重磨损,加精度降低,故改用滚轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘多刀半自车床的改进，扩大了加种类，提高了自化度，使其成为一台简易型数控车床。

Let's get the lathe to turn the new piston.

咱们用车床车[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽车修理厂那边传来德里克开动车床的声音。

They showed keen interest in the various lathes on exhibition.

他们对展出中的各车床表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本柱立式车床，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘多刀半自动车床的改进,扩大了加工,高了自动化程度,使其成为一台简易型数控车床。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对凸轮加工程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原车床主轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘多刀半自动车床的改进，扩大了加工，高了自动化程度，使其成为一台简易型数控车床。

Let's get the lathe to turn the new piston.

咱们用[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽修理厂那边传来德里克开动的声音。

They showed keen interest in the various lathes on exhibition.

他们对展出中的各类表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘多刀半自动的改进,扩大了加工种类,提高了自动化程度,使其成为一台简易型数控。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对轮加工程的数学模拟，利用原始产品轮外形来直接轮仿形的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原主轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘多刀半自动的改进，扩大了加工种类，提高了自动化程度，使其成为一台简易型数控。

Let's get the lathe to turn the new piston.

咱们用车床车[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽车修理厂那边传来德里克开动车床的声音。

They showed keen interest in the various lathes on exhibition.

他们对展中的各类车床表浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式车床，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘多刀半自动车床的改进,扩大加工种类,提高自动化程,成为一台简易型数控车床。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对凸轮加工程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原车床主轴支撑滑动轴承轴瓦严重磨损,加工精降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘多刀半自动车床的改进，扩大加工种类，提高自动化程，成为一台简易型数控车床。

Let's get the lathe to turn the new piston.

咱们用车床车[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽车修理厂那边传来德里克开动车床的声音。

They showed keen interest in the various lathes on exhibition.

他们对展出中的各类车床表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式车床，有立架和架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘自动车床的改进,扩大了加工种类,提高了自动化程度,使其成为台简易型数控车床。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对凸轮加工程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原车床主轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘自动车床的改进，扩大了加工种类，提高了自动化程度，使其成为台简易型数控车床。

Let's get the lathe to turn the new piston.

咱用车车[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽车修理厂那边传来德里克开动车的声。

They showed keen interest in the various lathes on exhibition.

对展出中的各类车表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式车，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

对C7620-11夹盘多刀半自动车的改进,扩大了加工种类,提高了自动化程度,使其成为一台简易型数控车。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

对凸轮加工程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车的靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原车主轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 对C7620-11夹盘多刀半自动车的改进，扩大了加工种类，提高了自动化程度，使其成为一台简易型数控车。

Let's get the lathe to turn the new piston.

咱们用车床车[加工]新的活塞吧。

From the garage there came the sound of Derek working a lathe.

汽车修理厂那边传来德里克开动车床的声音。

They showed keen interest in the various lathes on exhibition.

他们对展出中的各类车床表现出了浓厚的兴趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式车床，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘多刀半自动车床的改进,扩大了加工种类,提高了自动化程度,使其成为一台简易型数控车床。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对凸轮加工程的数学拟，利用始产品凸轮外形来直接设计凸轮仿形车床的。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

车床主轴支撑滑动轴承轴瓦严重磨损,加工精度降低,故改用滚动轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘多刀半自动车床的改进，扩大了加工种类，提高了自动化程度，使其成为一台简易型数控车床。

Let's get the lathe to turn the new piston.

咱们用车床车[加工]新活塞吧。

From the garage there came the sound of Derek working a lathe.

汽车修理厂那边传来德里克开车床声音。

They showed keen interest in the various lathes on exhibition.

他们对展出中各类车床表现出了浓趣。

This series machine is single column vertical lathe, it has a railhead and a sidehead.

本系列单柱立式车床，有一个立刀架和一个侧刀架。

C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine,so that the variety of process was increased ,and automation degree was also improved.

通对C7620-11夹盘多刀半车床改进,扩大了加工种类,提高了程度,使其成为一台简易型数控车床。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对凸轮加工程数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床靠模。

In order to prevent the reduction of the working accuracy of S1-280 Type Lathe that is made from overwear of main shaft bush bearing, it is substituted with rolling bearing.

原车床主轴支撑滑轴承轴瓦严重磨损,加工精度降低,故改用滚轴承支撑。

Abstract: C7620-11 semi-automatic chuck multicut lathe was reformed into a kind of simple constructed NC machine, so that the variety of process was increased ,and automation degree was also improved.

摘 要: 通对C7620-11夹盘多刀半车床改进，扩大了加工种类，提高了程度，使其成为一台简易型数控车床。