Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要石墨块、石墨粉、碳棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同的偶联剂对隐晶质石墨粉进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

碳纤维属于乱层石墨结构,具有导电、导热性能。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法碳石墨较碱法为优。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒石酸-锆复合溶液作基体改进剂，锆涂层热石墨管为原子化器。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究石墨作发泡剂的泡沫玻璃的收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀石墨靶方法在单晶硅衬底表面沉积了不同厚度的非晶碳膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣观结构和焊缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍碳氮化物合成成功的原因,对相关的类石墨的碳氮化合物和无定型的碳氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中石墨晶核的数量增加,有效地缩短了珠光体分时碳原子的扩散距离,从而加速了第二阶段石墨化过程中珠光体的转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石墨块、石墨粉、碳棒、电、糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同的偶联剂对隐晶质石墨粉进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

碳纤维属于乱层石墨结构,具有导电、导热性能。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法生产高碳石墨较碱法为优。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒石酸-锆复合溶液作基体改进剂，锆涂层热石墨管为原子化器。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究石墨作发泡剂的泡沫玻璃的微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀石墨靶方法在单晶硅衬底表面沉积了不同厚度的非晶碳膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸熔渣的碱度与熔渣微观结构和缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍碳氮化物合成成功的原因,对相关的类石墨的碳氮化合物和无定型的碳氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中石墨晶核的数量增加,有效地缩短了珠光体分时碳原子的扩散距离,从而加速了第二阶段石墨化过程中珠光体的转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石墨块、石墨粉、碳棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同的偶联剂对隐晶质石墨粉行表面学性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

碳纤维属于乱层石墨结构,具有导电、导热性能。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯焙烧法生产高碳石墨较碱法为优。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒石酸-锆复合溶液作基剂，锆涂层热石墨管为原。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究石墨作发泡剂的泡沫玻璃的微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀石墨靶方法在单晶硅衬底表面沉积了不同厚度的非晶碳膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍碳氮物合成成功的原因,对相关的类石墨的碳氮合物和无定型的碳氮合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

而分析了脉冲电场作用下基中石墨晶核的数量增加,有效地缩短了珠光分时碳原的扩散距离,从而加速了第二阶段石墨过程中珠光的转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石墨块、石墨粉、棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同的偶联剂对隐晶质石墨粉进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

纤维属于乱层石墨结构,具有导电、导热性能。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法生产高石墨较碱法为优。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒石酸-锆复合溶液作基体改进剂，锆涂层热石墨管为原子化器。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究石墨作发泡剂的泡沫玻璃的微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀石墨靶方法在单晶硅衬底表面沉积了不同厚度的非晶膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨化物合成成功的原因,对相关的类石墨的化合物和无定型的化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中石墨晶核的数量增加,有效地缩短了珠光体分时原子的扩散距离,从而加速了第二阶段石墨化过程中珠光体的转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产墨块、墨粉、棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同偶联剂对隐晶质墨粉进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

纤维属于乱层墨结构,具有导电、导热性能。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法生产墨较碱法为优。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒酸-锆复合溶液作基体改进剂，锆涂层热墨管为原子化器。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文目是研究墨作发泡剂泡沫玻波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀墨靶方法在单晶硅衬底表面沉积了不同厚度非晶膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣碱度与熔渣观结构和焊缝组织关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍氮化物合成成功原因,对相关类墨氮化合物和无定型氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中墨晶核数量增加,有效地缩短了珠光体分时原子扩散距离,从而加速了第二阶段墨化过程中珠光体转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要石墨块、石墨粉、碳棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同的偶联剂对隐晶质石墨粉进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

碳纤维属于乱层石墨结构,具有导电、导热性能。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法高碳石墨较碱法为优。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒石酸-锆复合溶液作基体改进剂，锆涂层热石墨管为原子化器。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究石墨作发泡剂的泡沫玻璃的微特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀石墨靶方法在单晶硅衬底表面沉积了不同厚度的非晶碳膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍碳氮化物合成成功的原因,对相关的类石墨的碳氮化合物和无定型的碳氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中石墨晶核的数量增加,有效地缩短了珠光体分时碳原子的扩散距离,从而加速了第二阶段石墨化过程中珠光体的转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石墨块、石墨粉、棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同的偶联剂对隐晶质石墨粉进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

纤维属于乱层石墨结构,具有导电、导热性能。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法生产高石墨较碱法为优。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒石酸-锆复合溶液作基体改进剂，锆涂层热石墨管为原子化器。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究石墨作发泡剂的泡沫玻璃的微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀石墨靶方法在单晶硅衬底表面沉积了不同厚度的非晶膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了氮化物合成成功的原因,对相关的类石墨的氮化合物和无定型的氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中石墨晶核的数量增加,有效地缩短了珠光体分时原子的扩散距离,从而加速了第二阶段石墨化过程中珠光体的转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石墨块、石墨粉、碳棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用不同偶联剂对隐晶质石墨粉进行表面化学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

碳纤维属于乱层石墨结构,具有导电、导热性能。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法生产高碳石墨较碱法为优。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒石酸-锆复合溶液作基体改进剂，锆涂层热石墨管为原子化器。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文目是研究石墨作发泡剂泡沫玻璃微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀石墨靶方法在单晶硅衬底表面沉积了不同厚度非晶碳膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣碱度与熔渣微观结构和焊缝组织。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍碳氮化物合成成功原因,对相类石墨碳氮化合物和无定型碳氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中石墨晶核数量增加,有效地缩短了珠光体分时碳原子扩散距离,从而加速了第二阶段石墨化过程中珠光体转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石墨块、石墨粉、碳棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选不同的偶联剂对隐晶质石墨粉进行表面学改性。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

碳纤维属于乱层石墨结构,具有导电、导热性能。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指焙烧法生产高碳石墨较碱法为优。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采酒石酸-锆复合溶液作基体改进剂，锆涂层热石墨管为原子器。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究石墨作发泡剂的泡沫玻璃的微波吸收特性。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

烧蚀石墨靶方法在单晶硅衬底表面沉积了不同厚度的非晶碳膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯同质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍碳氮物合成成功的原因,对相关的类石墨的碳氮合物和无定型的碳氮合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作下基体中石墨晶核的数量增加,有效地缩短了珠体分时碳原子的扩散距离,从而加速了第二阶段石墨过程中珠体的转变。

Main products are graphite block, graphite powder, kryptol, electrode, anode mud, protection residue etc.

公司主要生产石墨块、石墨粉、棒、电极、阳极糊、保护渣等。

In the article, the process conditions of wet surface modification of aphanitic graphite are studied.

选用的偶联剂对隐晶质石墨粉进行表面化学改。

Carbon fiber has turbostratic graphite structure with eleclroconductive and diathermanous properties.

维属于乱层石墨结构,具有导电、导热能。

It is proved that preduction of high-carbon graphite by chloridizing roast is better than by alcali.

指出氯化焙烧法生产高石墨较碱法为优。

Tartrate solution and zirconyl chloride were used as the matrix modifier for coating graphite tube.

采用酒石酸-锆复合溶液作基体改进剂，锆涂层热石墨管为原子化器。

The purpose of this paper is to study the radar absorbing effect of foamglass with graphite as vesicant.

本文的目的是研究石墨作发泡剂的泡沫玻璃的微波吸收特。

Several amorphic carbon films with different thickness were deposited on single crystal silicon by means of pulse laser ablating graphet target at room temprature.

用激光烧蚀石墨靶方法在单晶硅衬底表面沉积了度的非晶膜。

The relationship between basicity of graphitiferous slag and microstructurcs of both slag and weld metal arc investigated for the same electrode with cast iron.

本文通过计算石墨型熔渣碱度,研究了钢芯质铸铁焊条熔渣的碱度与熔渣微观结构和焊缝组织的关系。

The reason for the fail of carbon nitride synthesis was analysed and relevant graphitoid carbon nitride and unformed carbon nitrides were introduced in the article.

分析了妨碍氮化物合成成功的原因,对相关的类石墨的氮化合物和无定型的氮化合物作了介绍。

The result indicated that transformation of perlite was accelerated and the quantities of ferrolites was increased under the function of impulse electric field at second stage graphitization.

进而分析了脉冲电场作用下基体中石墨晶核的数量增加,有效地缩短了珠光体分时原子的扩散距离,从而加速了第二阶段石墨化过程中珠光体的转变。