Pyrolysis and liquification of polypropylene(PP) were studied by using molten ZnCl2 as heat carrier.

以熔融氯锌作为载体,聚丙烯(PP)的解液进行研究。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射成型加工性能。

Granite as raw material,PSA is made in a series of aggregat e reactions of chemical fusibility.

选用花岗闪长岩为原料，通过一系列的学熔融聚合反应制成新型絮凝剂--聚硅酸铁铝盐絮凝剂。

Self-extinguishing, no fusion and no drippage.

具有自熄效果，不熔融滴落。

The sample was molten and decomposed with sodium peroxide,leached and acidified with hot water and constant-volumed.

试样以过氧钠熔融分解,取、酸,定容。

This bead fusion method is a perfect sampling method for ICP, AA, as well as for indissolvable samples in wet chemical analysis.

ICP、AA湿法学分析手段，难溶样品，熔融方法同样是一种非常完美的制样手段。

When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

当两种不同的金属放在熔融的碱金属或碱土金属氯物盐浴中时,较易腐蚀的金属会沉积在较难腐蚀的金属上。

This paper discussesd the preparation of glage-trace element fertiliar.Main raw material-glass and some trace element were put into together,when the reactants were melt,they occur solidoid reaction.

玻璃微量元素肥料,是以玻璃为主要原料,加人适量的微量元素,经过灼烧成为熔融状态后,发生固相反应,即生成玻璃微量元素肥料。

CA Cement Clinker is a manufactured commodity which raw materials are high quality limestone and bauxite.The raw materials should be mixed according to suitable ratio to pelletize.

铝酸钙熟料是以经优质的钙质、铝质原材料按适当的比例配合，经成型后烧结至部分熔融而制成。

The alloy layer of tinplate is an intermetallic compound formed between base plate and tin coating through thermodiffusion during the treatment of heating and fusing after electrotinning.

镀锡板合金层是镀锡后在加熔融处理过程中通过扩散在基板与锡层之间生成的一种金属间合物,因此,合金层的生成与原板镀层都有很大关系。

This method not only lowcrs the temperature of labelling ortho-iodo-hippuric acid, speeds up the reaction and gives high yield, but aslo suits the requirement of large scale production.

早期,邻-碘马尿酸的标记大多采用溶液体系,熔融体系,液熔融体系的交换法来制备。

Abstract : When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

摘要 ： 当两种不同的金属放在熔融的碱金属或碱土金属氯物盐浴中时,较易腐蚀的金属会沉积在较难腐蚀的金属上。

Rapid growth of “mother dendrites” in a given location of a melt at just below the liquidus temperature, that growth being the result of rapid heat extraction from the melt, or from recalescence.

在特定的熔点，以低液相线的温度快速生成“母晶枝”，这是使熔融金属或复辉快速散的结果。

Pyrolysis and liquification of polypropylene(PP) were studied by using molten ZnCl2 as heat carrier.

氯锌作为热载体,对聚丙烯(PP)的热解液进行研究。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可氟塑料PVDF具有较好的注射成型加工性能。

Granite as raw material,PSA is made in a series of aggregat e reactions of chemical fusibility.

选用花岗闪长岩为原料，通一系列的学聚合反应制成新型絮凝剂--聚硅酸铁铝盐絮凝剂。

Self-extinguishing, no fusion and no drippage.

具有自熄效果，不滴落。

The sample was molten and decomposed with sodium peroxide,leached and acidified with hot water and constant-volumed.

试样氧钠分解,热水浸取、酸,定容。

This bead fusion method is a perfect sampling method for ICP, AA, as well as for indissolvable samples in wet chemical analysis.

对于ICP、AA和湿法学分析手段，对于难溶样品，方法同样是一种非常完美的制样手段。

When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

当两种不同的金属放在的碱金属或碱土金属氯物盐浴中时,较易腐蚀的金属会沉积在较难腐蚀的金属上。

This paper discussesd the preparation of glage-trace element fertiliar.Main raw material-glass and some trace element were put into together,when the reactants were melt,they occur solidoid reaction.

玻璃微量元素肥料,是玻璃为主要原料,加人适量的微量元素,经成为状态后,发生固相反应,即生成玻璃微量元素肥料。

CA Cement Clinker is a manufactured commodity which raw materials are high quality limestone and bauxite.The raw materials should be mixed according to suitable ratio to pelletize.

铝酸钙熟料是经优质的钙质、铝质原材料按适当的比例配合，经成型后结至部分而制成。

The alloy layer of tinplate is an intermetallic compound formed between base plate and tin coating through thermodiffusion during the treatment of heating and fusing after electrotinning.

镀锡板合金层是镀锡后在加热处理程中通热扩散在基板与锡层之间生成的一种金属间合物,因此,合金层的生成与原板和镀层都有很大关系。

This method not only lowcrs the temperature of labelling ortho-iodo-hippuric acid, speeds up the reaction and gives high yield, but aslo suits the requirement of large scale production.

早期,邻-碘马尿酸的标记大多采用水溶液体系,热体系,热液体系的交换法来制备。

Abstract : When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

摘要 ： 当两种不同的金属放在的碱金属或碱土金属氯物盐浴中时,较易腐蚀的金属会沉积在较难腐蚀的金属上。

Rapid growth of “mother dendrites” in a given location of a melt at just below the liquidus temperature, that growth being the result of rapid heat extraction from the melt, or from recalescence.

在特定的点，低于液相线的温度快速生成“母晶枝”，这是使金属或复辉快速散热的结果。

Pyrolysis and liquification of polypropylene(PP) were studied by using molten ZnCl2 as heat carrier.

以熔融氯锌作为热载体,对聚丙烯(PP)热解液进行研究。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融PVDF具有较好注射成型加工性能。

Granite as raw material,PSA is made in a series of aggregat e reactions of chemical fusibility.

选用花岗闪长岩为原，通过一系列学熔融聚合反应制成新型絮凝剂--聚硅酸铁铝盐絮凝剂。

Self-extinguishing, no fusion and no drippage.

具有自熄效果，不熔融滴落。

The sample was molten and decomposed with sodium peroxide,leached and acidified with hot water and constant-volumed.

试样以过氧钠熔融分解,热水浸取、酸,定容。

This bead fusion method is a perfect sampling method for ICP, AA, as well as for indissolvable samples in wet chemical analysis.

对于ICP、AA和湿法学分析手段，对于难溶样品，熔融方法同样是一种非常完美制样手段。

When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

当两种不同放在熔融碱或碱土氯物盐浴中时,较易腐蚀会沉积在较难腐蚀上。

This paper discussesd the preparation of glage-trace element fertiliar.Main raw material-glass and some trace element were put into together,when the reactants were melt,they occur solidoid reaction.

玻璃微量元素肥,是以玻璃为主要原,加人适量微量元素,经过灼烧成为熔融状态后,发生固相反应,即生成玻璃微量元素肥。

CA Cement Clinker is a manufactured commodity which raw materials are high quality limestone and bauxite.The raw materials should be mixed according to suitable ratio to pelletize.

铝酸钙熟是以经优质钙质、铝质原材按适当比例配合，经成型后烧结至部分熔融而制成。

The alloy layer of tinplate is an intermetallic compound formed between base plate and tin coating through thermodiffusion during the treatment of heating and fusing after electrotinning.

镀锡板合层是镀锡后在加热熔融处理过程中通过热扩散在基板与锡层之间生成一种间合物,因此,合层生成与原板和镀层都有很大关系。

This method not only lowcrs the temperature of labelling ortho-iodo-hippuric acid, speeds up the reaction and gives high yield, but aslo suits the requirement of large scale production.

早期,邻-碘马尿酸标记大多采用水溶液体系,热熔融体系,热液熔融体系交换法来制备。

Abstract : When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

摘要 ： 当两种不同放在熔融碱或碱土氯物盐浴中时,较易腐蚀会沉积在较难腐蚀上。

Rapid growth of “mother dendrites” in a given location of a melt at just below the liquidus temperature, that growth being the result of rapid heat extraction from the melt, or from recalescence.

在特定熔点，以低于液相线温度快速生成“母晶枝”，这是使熔融或复辉快速散热结果。

Pyrolysis and liquification of polypropylene(PP) were studied by using molten ZnCl2 as heat carrier.

以熔融氯锌作为载体,对聚丙(PP)解液进行研究。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好注射成型加工性能。

Granite as raw material,PSA is made in a series of aggregat e reactions of chemical fusibility.

选用花岗闪长岩为料，通过一系列学熔融聚合反应制成新型絮凝剂--聚硅酸铁铝盐絮凝剂。

Self-extinguishing, no fusion and no drippage.

具有自熄效果，不熔融滴落。

The sample was molten and decomposed with sodium peroxide,leached and acidified with hot water and constant-volumed.

试样以过氧钠熔融分解,水浸取、酸,定容。

This bead fusion method is a perfect sampling method for ICP, AA, as well as for indissolvable samples in wet chemical analysis.

对于ICP、AA和湿法学分析手段，对于难溶样品，熔融方法同样是一种非常完美制样手段。

When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

当两种不同金属放在熔融碱金属或碱土金属氯物盐浴中时,较易腐蚀金属会沉积在较难腐蚀金属上。

This paper discussesd the preparation of glage-trace element fertiliar.Main raw material-glass and some trace element were put into together,when the reactants were melt,they occur solidoid reaction.

玻璃微量元素肥料,是以玻璃为料,加人适量微量元素,经过灼烧成为熔融状态后,发生固相反应,即生成玻璃微量元素肥料。

CA Cement Clinker is a manufactured commodity which raw materials are high quality limestone and bauxite.The raw materials should be mixed according to suitable ratio to pelletize.

铝酸钙熟料是以经优质钙质、铝质材料按适当比例配合，经成型后烧结至部分熔融而制成。

The alloy layer of tinplate is an intermetallic compound formed between base plate and tin coating through thermodiffusion during the treatment of heating and fusing after electrotinning.

镀锡板合金层是镀锡后在加熔融处理过程中通过扩散在基板与锡层之间生成一种金属间合物,因此,合金层生成与板和镀层都有很大关系。

This method not only lowcrs the temperature of labelling ortho-iodo-hippuric acid, speeds up the reaction and gives high yield, but aslo suits the requirement of large scale production.

早期,邻-碘马尿酸标记大多采用水溶液体系,熔融体系,液熔融体系交换法来制备。

Abstract : When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

摘 ： 当两种不同金属放在熔融碱金属或碱土金属氯物盐浴中时,较易腐蚀金属会沉积在较难腐蚀金属上。

Rapid growth of “mother dendrites” in a given location of a melt at just below the liquidus temperature, that growth being the result of rapid heat extraction from the melt, or from recalescence.

在特定熔点，以低于液相线温度快速生成“母晶枝”，这是使熔融金属或复辉快速散结果。

Pyrolysis and liquification of polypropylene(PP) were studied by using molten ZnCl2 as heat carrier.

以氯锌作为热载体,对聚丙烯(PP)的热解液进行研究。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可氟塑料PVDF具有较好的注射成型加工性能。

Granite as raw material,PSA is made in a series of aggregat e reactions of chemical fusibility.

选用花岗闪长岩为原料，通过一系列的聚合反应制成新型絮凝剂--聚硅酸铁铝盐絮凝剂。

Self-extinguishing, no fusion and no drippage.

具有自熄效果，不滴落。

The sample was molten and decomposed with sodium peroxide,leached and acidified with hot water and constant-volumed.

试样以过氧解,热水浸取、酸,定容。

This bead fusion method is a perfect sampling method for ICP, AA, as well as for indissolvable samples in wet chemical analysis.

对于ICP、AA和湿法析手段，对于难溶样品，方法同样是一种非常完美的制样手段。

When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

当两种不同的金属放在的碱金属或碱土金属氯物盐浴中时,较易腐蚀的金属会沉积在较难腐蚀的金属上。

This paper discussesd the preparation of glage-trace element fertiliar.Main raw material-glass and some trace element were put into together,when the reactants were melt,they occur solidoid reaction.

玻璃微量元素肥料,是以玻璃为主要原料,加人适量的微量元素,经过灼烧成为状态后,发生固相反应,即生成玻璃微量元素肥料。

CA Cement Clinker is a manufactured commodity which raw materials are high quality limestone and bauxite.The raw materials should be mixed according to suitable ratio to pelletize.

铝酸钙熟料是以经优质的钙质、铝质原材料按适当的比例配合，经成型后烧结至部而制成。

The alloy layer of tinplate is an intermetallic compound formed between base plate and tin coating through thermodiffusion during the treatment of heating and fusing after electrotinning.

镀锡板合金层是镀锡后在加热处理过程中通过热扩散在基板与锡层之间生成的一种金属间合物,因此,合金层的生成与原板和镀层都有很大关系。

This method not only lowcrs the temperature of labelling ortho-iodo-hippuric acid, speeds up the reaction and gives high yield, but aslo suits the requirement of large scale production.

早期,邻-碘马尿酸的标记大多采用水溶液体系,热体系,热液体系的交换法来制备。

Abstract : When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

摘要 ： 当两种不同的金属放在的碱金属或碱土金属氯物盐浴中时,较易腐蚀的金属会沉积在较难腐蚀的金属上。

Rapid growth of “mother dendrites” in a given location of a melt at just below the liquidus temperature, that growth being the result of rapid heat extraction from the melt, or from recalescence.

在特定的点，以低于液相线的温度快速生成“母晶枝”，这是使金属或复辉快速散热的结果。

Pyrolysis and liquification of polypropylene(PP) were studied by using molten ZnCl2 as heat carrier.

以熔融氯锌作为热载体,对聚丙烯(PP)热解液进行研究。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好注射成型能。

Granite as raw material,PSA is made in a series of aggregat e reactions of chemical fusibility.

选用花岗闪长岩为原料，通过一系列学熔融聚合反应制成新型絮凝剂--聚硅酸铁铝盐絮凝剂。

Self-extinguishing, no fusion and no drippage.

具有自熄效果，不熔融滴落。

The sample was molten and decomposed with sodium peroxide,leached and acidified with hot water and constant-volumed.

试样以过氧钠熔融分解,热水浸取、酸,定容。

This bead fusion method is a perfect sampling method for ICP, AA, as well as for indissolvable samples in wet chemical analysis.

对于ICP、AA和湿法学分析手段，对于难溶样品，熔融方法同样是一种非常完美制样手段。

When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

当两种不同属放在熔融碱属或碱土属氯物盐浴中时,较易腐属会沉积在较难腐属上。

This paper discussesd the preparation of glage-trace element fertiliar.Main raw material-glass and some trace element were put into together,when the reactants were melt,they occur solidoid reaction.

玻璃微量元素肥料,是以玻璃为主要原料,人适量微量元素,经过灼烧成为熔融状态后,发生固相反应,即生成玻璃微量元素肥料。

CA Cement Clinker is a manufactured commodity which raw materials are high quality limestone and bauxite.The raw materials should be mixed according to suitable ratio to pelletize.

铝酸钙熟料是以经优质钙质、铝质原材料按适当比例配合，经成型后烧结至部分熔融而制成。

The alloy layer of tinplate is an intermetallic compound formed between base plate and tin coating through thermodiffusion during the treatment of heating and fusing after electrotinning.

镀锡板合层是镀锡后在热熔融处理过程中通过热扩散在基板与锡层之间生成一种属间合物,因此,合层生成与原板和镀层都有很大关系。

This method not only lowcrs the temperature of labelling ortho-iodo-hippuric acid, speeds up the reaction and gives high yield, but aslo suits the requirement of large scale production.

早期,邻-碘马尿酸标记大多采用水溶液体系,热熔融体系,热液熔融体系交换法来制备。

Abstract : When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

摘要 ： 当两种不同属放在熔融碱属或碱土属氯物盐浴中时,较易腐属会沉积在较难腐属上。

Rapid growth of “mother dendrites” in a given location of a melt at just below the liquidus temperature, that growth being the result of rapid heat extraction from the melt, or from recalescence.

在特定熔点，以低于液相线温度快速生成“母晶枝”，这是使熔融属或复辉快速散热结果。

Pyrolysis and liquification of polypropylene(PP) were studied by using molten ZnCl2 as heat carrier.

以熔氯锌作为热载体,对聚丙烯(PP)的热解液进行研究。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结显示可熔氟塑料PVDF具有较好的注射成型加工性能。

Granite as raw material,PSA is made in a series of aggregat e reactions of chemical fusibility.

选用花岗闪长岩为原料，通过一系列的学熔聚合反应制成新型絮凝剂--聚硅酸铁铝盐絮凝剂。

Self-extinguishing, no fusion and no drippage.

具有自熄，熔滴落。

The sample was molten and decomposed with sodium peroxide,leached and acidified with hot water and constant-volumed.

试样以过氧钠熔分解,热水浸取、酸,定容。

This bead fusion method is a perfect sampling method for ICP, AA, as well as for indissolvable samples in wet chemical analysis.

对于ICP、AA和湿法学分析手段，对于难溶样品，熔法同样是一种非常完美的制样手段。

When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

当两种同的金属放在熔的碱金属或碱土金属氯物盐浴中时,较易腐蚀的金属会沉积在较难腐蚀的金属上。

This paper discussesd the preparation of glage-trace element fertiliar.Main raw material-glass and some trace element were put into together,when the reactants were melt,they occur solidoid reaction.

玻璃微量元素肥料,是以玻璃为主要原料,加人适量的微量元素,经过灼烧成为熔状态后,发生固相反应,即生成玻璃微量元素肥料。

CA Cement Clinker is a manufactured commodity which raw materials are high quality limestone and bauxite.The raw materials should be mixed according to suitable ratio to pelletize.

铝酸钙熟料是以经优质的钙质、铝质原材料按适当的比例配合，经成型后烧结至部分熔而制成。

The alloy layer of tinplate is an intermetallic compound formed between base plate and tin coating through thermodiffusion during the treatment of heating and fusing after electrotinning.

镀锡板合金层是镀锡后在加热熔处理过程中通过热扩散在基板与锡层之间生成的一种金属间合物,因此,合金层的生成与原板和镀层都有很大关系。

This method not only lowcrs the temperature of labelling ortho-iodo-hippuric acid, speeds up the reaction and gives high yield, but aslo suits the requirement of large scale production.

早期,邻-碘马尿酸的标记大多采用水溶液体系,热熔体系,热液熔体系的交换法来制备。

Abstract : When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

摘要 ： 当两种同的金属放在熔的碱金属或碱土金属氯物盐浴中时,较易腐蚀的金属会沉积在较难腐蚀的金属上。

Rapid growth of “mother dendrites” in a given location of a melt at just below the liquidus temperature, that growth being the result of rapid heat extraction from the melt, or from recalescence.

在特定的熔点，以低于液相线的温度快速生成“母晶枝”，这是使熔金属或复辉快速散热的结。

Pyrolysis and liquification of polypropylene(PP) were studied by using molten ZnCl2 as heat carrier.

以熔融氯热载体,对聚丙烯(PP)的热解液进行研究。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可熔融氟塑料PVDF具有较好的注射成型加工性能。

Granite as raw material,PSA is made in a series of aggregat e reactions of chemical fusibility.

选用花岗闪长岩原料，通过一系列的学熔融聚合反应制成新型絮凝剂--聚硅酸铁铝盐絮凝剂。

Self-extinguishing, no fusion and no drippage.

具有自熄效果，不熔融滴落。

The sample was molten and decomposed with sodium peroxide,leached and acidified with hot water and constant-volumed.

试样以过氧钠熔融分解,热水浸取、酸,定容。

This bead fusion method is a perfect sampling method for ICP, AA, as well as for indissolvable samples in wet chemical analysis.

对于ICP、AA和湿法学分析手段，对于难溶样品，熔融方法同样是一种非常完美的制样手段。

When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

当两种不同的金属放在熔融的碱金属或碱土金属氯物盐浴中时,较易腐蚀的金属会沉积在较难腐蚀的金属上。

This paper discussesd the preparation of glage-trace element fertiliar.Main raw material-glass and some trace element were put into together,when the reactants were melt,they occur solidoid reaction.

玻璃素肥料,是以玻璃主要原料,加人适的素,经过灼烧成熔融状态后,发生固相反应,即生成玻璃素肥料。

CA Cement Clinker is a manufactured commodity which raw materials are high quality limestone and bauxite.The raw materials should be mixed according to suitable ratio to pelletize.

铝酸钙熟料是以经优质的钙质、铝质原材料按适当的比例配合，经成型后烧结至部分熔融而制成。

The alloy layer of tinplate is an intermetallic compound formed between base plate and tin coating through thermodiffusion during the treatment of heating and fusing after electrotinning.

镀锡板合金层是镀锡后在加热熔融处理过程中通过热扩散在基板与锡层之间生成的一种金属间合物,因此,合金层的生成与原板和镀层都有很大关系。

This method not only lowcrs the temperature of labelling ortho-iodo-hippuric acid, speeds up the reaction and gives high yield, but aslo suits the requirement of large scale production.

早期,邻-碘马尿酸的标记大多采用水溶液体系,热熔融体系,热液熔融体系的交换法来制备。

Abstract : When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

摘要 ： 当两种不同的金属放在熔融的碱金属或碱土金属氯物盐浴中时,较易腐蚀的金属会沉积在较难腐蚀的金属上。

Rapid growth of “mother dendrites” in a given location of a melt at just below the liquidus temperature, that growth being the result of rapid heat extraction from the melt, or from recalescence.

在特定的熔点，以低于液相线的温度快速生成“母晶枝”，这是使熔融金属或复辉快速散热的结果。

Pyrolysis and liquification of polypropylene(PP) were studied by using molten ZnCl2 as heat carrier.

以氯锌作为热载体,对聚丙烯(PP)的热解液进行研究。

The results indicate the melt processible fluoroplastics PVDF has good processing property of injection molding.

结果显示可氟塑料PVDF具有较好的注射成型加工性能。

Granite as raw material,PSA is made in a series of aggregat e reactions of chemical fusibility.

选用花岗闪长岩为原料，通过一系列的学聚合反应制成新型絮凝剂--聚硅酸铁铝盐絮凝剂。

Self-extinguishing, no fusion and no drippage.

具有自熄效果，不滴落。

The sample was molten and decomposed with sodium peroxide,leached and acidified with hot water and constant-volumed.

试样以过氧钠分解,热水浸取、酸,定容。

This bead fusion method is a perfect sampling method for ICP, AA, as well as for indissolvable samples in wet chemical analysis.

对于ICP、AA和湿法学分析手段，对于难溶样品，方法同样是一种非常完美的制样手段。

When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

当两种不同的金属放在的碱金属或碱土金属氯物盐浴中时,较易腐蚀的金属会沉积在较难腐蚀的金属上。

This paper discussesd the preparation of glage-trace element fertiliar.Main raw material-glass and some trace element were put into together,when the reactants were melt,they occur solidoid reaction.

玻璃微量元素肥料,是以玻璃为主要原料,加人适量的微量元素,经过灼烧成为态后,发生固相反应,即生成玻璃微量元素肥料。

CA Cement Clinker is a manufactured commodity which raw materials are high quality limestone and bauxite.The raw materials should be mixed according to suitable ratio to pelletize.

铝酸钙熟料是以经优质的钙质、铝质原材料按适当的比配合，经成型后烧结至部分而制成。

The alloy layer of tinplate is an intermetallic compound formed between base plate and tin coating through thermodiffusion during the treatment of heating and fusing after electrotinning.

镀锡板合金层是镀锡后在加热处理过程中通过热扩散在基板与锡层之间生成的一种金属间合物,因此,合金层的生成与原板和镀层都有很大关系。

This method not only lowcrs the temperature of labelling ortho-iodo-hippuric acid, speeds up the reaction and gives high yield, but aslo suits the requirement of large scale production.

早期,邻-碘马尿酸的标记大多采用水溶液体系,热体系,热液体系的交换法来制备。

Abstract : When two different metals are placed in a fused alkali or alkaline-earth chloride bath, the more readily corrodible metal will deposit on the less corrodible one.

摘要 ： 当两种不同的金属放在的碱金属或碱土金属氯物盐浴中时,较易腐蚀的金属会沉积在较难腐蚀的金属上。

Rapid growth of “mother dendrites” in a given location of a melt at just below the liquidus temperature, that growth being the result of rapid heat extraction from the melt, or from recalescence.

在特定的点，以低于液相线的温度快速生成“母晶枝”，这是使金属或复辉快速散热的结果。