To protect the power component of electric welding machine,overtension and undertension protection are circuit designed.

为保护机功率器件设计了过欠电路。

It has a laser welder, a video display screen, and a buzzsaw.

它装备了一部激光机、一部视频显示屏和一个圆锯。

A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.

针对磁放大器式电源埋弧自动机设计了单片机控制系统。

The UN250 butt-welding machine adopts manual flash prewarming, hydraulic pressure upset mode, is suitable to weld large diameter and section weldment.

UN250对机采用手动闪光预热、液方式，适合大直径大截面件。

The welding machine has strong anti-electricity fluctuation ability,it is available to produce in small quantity.At the same time,further research should be held on accurancy accouplement.

得出该机抗电网波动能力强、可小批量生产，同时还应从精确匹配上进一步研究结论。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，双翦机，点机，冲齿机，辊机，盘根编织机。

To solve the problems of low quality, low efficiency and high cost of steel mesh reinforcement used in the mines, one kind of special spotwelder was developed.

摘要为解决矿山用钢筋网架生产过程中出现产品质量差、效率低、成本高等问题，研制出一种专用钢筋网架机。

To protect the power component of electric welding machine,overtension and undertension protection are circuit designed.

为保护焊的功率器件设计了过压欠压电路。

It has a laser welder, a video display screen, and a buzzsaw.

它装备了一部激光焊、一部视频显示屏和一个圆锯。

A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.

针对磁放大器式电源埋弧自焊设计了单片控制系统。

The UN250 butt-welding machine adopts manual flash prewarming, hydraulic pressure upset mode, is suitable to weld large diameter and section weldment.

UN250对焊手闪光预热、液压顶锻的方式，适合焊大直径大截面的焊件。

The welding machine has strong anti-electricity fluctuation ability,it is available to produce in small quantity.At the same time,further research should be held on accurancy accouplement.

得出该焊抗电能力强、可小批量生产，同时还应从精确匹配上进一步研究的结论。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕，盘环，铣槽，倒角，包覆，双翦，点焊，冲齿，辊压，盘根编织。

To solve the problems of low quality, low efficiency and high cost of steel mesh reinforcement used in the mines, one kind of special spotwelder was developed.

摘要为解决矿山钢筋架生产过程中出现的产品质量差、效率低、成本高等问题，研制出一种专钢筋架焊。

To protect the power component of electric welding machine,overtension and undertension protection are circuit designed.

为保护的功率器件设计了过压欠压电路。

It has a laser welder, a video display screen, and a buzzsaw.

它装备了一部激、一部视频显示屏和一个圆锯。

A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.

针对磁放大器式电源埋弧自动设计了单片控制系统。

The UN250 butt-welding machine adopts manual flash prewarming, hydraulic pressure upset mode, is suitable to weld large diameter and section weldment.

UN250对采用手动闪预热、液压顶锻的方式，适合大直径大截面的件。

The welding machine has strong anti-electricity fluctuation ability,it is available to produce in small quantity.At the same time,further research should be held on accurancy accouplement.

得出该抗电网波动能力强、可小批量生产，同时还应从精确匹配上进一步研究的结论。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封械 ：盘根，盘根切割，片切割，缠绕，盘环，铣槽，倒角，包覆，双翦，点，冲齿，辊压，盘根编织。

To solve the problems of low quality, low efficiency and high cost of steel mesh reinforcement used in the mines, one kind of special spotwelder was developed.

摘要为解决矿山用钢筋网架生产过程中出现的产品质量差、效率低、成本高等问题，研制出一种专用钢筋网架。

To protect the power component of electric welding machine,overtension and undertension protection are circuit designed.

为保护机的功率器件设计了过压欠压电路。

It has a laser welder, a video display screen, and a buzzsaw.

它装备了一部机、一部视频显示屏和一个圆锯。

A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.

针对磁放大器式电源埋弧自动机设计了单机控制系统。

The UN250 butt-welding machine adopts manual flash prewarming, hydraulic pressure upset mode, is suitable to weld large diameter and section weldment.

UN250对机采用手动闪预热、液压顶锻的方式，适合大直径大截面的件。

The welding machine has strong anti-electricity fluctuation ability,it is available to produce in small quantity.At the same time,further research should be held on accurancy accouplement.

得出该机抗电网波动能力强、可小批量生产，同时还应从精确匹配上进一步研究的结论。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工，盘根切割工，切割工，缠绕机，盘环机，铣槽机，倒角机，包覆机，双翦机，点机，冲齿机，辊压机，盘根编织机。

To solve the problems of low quality, low efficiency and high cost of steel mesh reinforcement used in the mines, one kind of special spotwelder was developed.

摘要为解决矿山用钢筋网架生产过程中出现的产品质量差、效率低、成本高等问题，研制出一种专用钢筋网架机。

To protect the power component of electric welding machine,overtension and undertension protection are circuit designed.

为保护焊机功率器件设计了过压欠压电路。

It has a laser welder, a video display screen, and a buzzsaw.

它装备了一部激光焊机、一部视频显示屏和一个圆锯。

A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.

放大器式电源埋弧自动焊机设计了单片机控制系统。

The UN250 butt-welding machine adopts manual flash prewarming, hydraulic pressure upset mode, is suitable to weld large diameter and section weldment.

UN250焊机采用手动闪光预热、液压顶锻方式，适合焊大直径大截面焊件。

The welding machine has strong anti-electricity fluctuation ability,it is available to produce in small quantity.At the same time,further research should be held on accurancy accouplement.

得出该焊机抗电网波动能力强、可小批量生产，同时还应从精确匹配上进一步研究。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，双翦机，点焊机，冲齿机，辊压机，盘根编织机。

To solve the problems of low quality, low efficiency and high cost of steel mesh reinforcement used in the mines, one kind of special spotwelder was developed.

摘要为解决矿山用钢筋网架生产过程中出现产品质量差、效率低、成本高等问题，研制出一种专用钢筋网架焊机。

To protect the power component of electric welding machine,overtension and undertension protection are circuit designed.

保护焊的功率器件设计了过压欠压电路。

It has a laser welder, a video display screen, and a buzzsaw.

它装备了一部激光焊、一部视频显示屏和一个圆锯。

A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.

针对磁放大器式电源埋弧自动焊设计了单片控制系统。

The UN250 butt-welding machine adopts manual flash prewarming, hydraulic pressure upset mode, is suitable to weld large diameter and section weldment.

UN250对焊采用手动闪光预热、液压顶锻的方式，适合焊大直径大截面的焊件。

The welding machine has strong anti-electricity fluctuation ability,it is available to produce in small quantity.At the same time,further research should be held on accurancy accouplement.

得出该焊抗电网波动能力强、可小批量生产，同时还应从精确匹配上进一步研究的结论。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕，盘环，铣槽，倒角，包覆，双翦，点焊，，辊压，盘根编织。

To solve the problems of low quality, low efficiency and high cost of steel mesh reinforcement used in the mines, one kind of special spotwelder was developed.

摘要解决矿山用钢筋网架生产过程中出现的产品质量差、效率低、成本高等问题，研制出一种专用钢筋网架焊。

To protect the power component of electric welding machine,overtension and undertension protection are circuit designed.

为保护焊的功率器件设计了过欠电路。

It has a laser welder, a video display screen, and a buzzsaw.

它装备了一部激光焊、一部视频显示屏和一个圆锯。

A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.

针对磁放大器式电源埋弧自动焊设计了单片控制系统。

The UN250 butt-welding machine adopts manual flash prewarming, hydraulic pressure upset mode, is suitable to weld large diameter and section weldment.

UN250对焊采用手动闪光预热、液顶锻的方式，适合焊大直径大截面的焊件。

The welding machine has strong anti-electricity fluctuation ability,it is available to produce in small quantity.At the same time,further research should be held on accurancy accouplement.

得出该焊抗电网波动能力强、可小批量生产，同时还应从精确匹配上进一步研究的结论。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封械 ：根工具，根切割工具，垫片切割工具，缠绕，环，铣槽，倒角，包覆，双翦，点焊，冲齿，辊，根编织。

To solve the problems of low quality, low efficiency and high cost of steel mesh reinforcement used in the mines, one kind of special spotwelder was developed.

摘要为解决矿山用钢筋网架生产过程中出现的产品质量差、效率低、成本高等问题，研制出一种专用钢筋网架焊。

To protect the power component of electric welding machine,overtension and undertension protection are circuit designed.

为保护焊机的功率器件设计了过压欠压电路。

It has a laser welder, a video display screen, and a buzzsaw.

它装备了一部激光焊机、一部视频显示屏和一个圆锯。

A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.

针对磁放大器式电源埋焊机设计了单片机控制系统。

The UN250 butt-welding machine adopts manual flash prewarming, hydraulic pressure upset mode, is suitable to weld large diameter and section weldment.

UN250对焊机采用手闪光预热、液压顶锻的方式，适合焊大直径大截面的焊件。

The welding machine has strong anti-electricity fluctuation ability,it is available to produce in small quantity.At the same time,further research should be held on accurancy accouplement.

得出该焊机抗电网波能力强、可小批量生产，同时还应从配上进一步研究的结论。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，双翦机，点焊机，冲齿机，辊压机，盘根编织机。

To solve the problems of low quality, low efficiency and high cost of steel mesh reinforcement used in the mines, one kind of special spotwelder was developed.

摘要为解决矿山用钢筋网架生产过程中出现的产品质量差、效率低、成本高等问题，研制出一种专用钢筋网架焊机。

To protect the power component of electric welding machine,overtension and undertension protection are circuit designed.

为保护焊机功率器件设计了过压欠压电路。

It has a laser welder, a video display screen, and a buzzsaw.

它装备了一部激光焊机、一部视频显示屏和一个圆锯。

A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.

放大器式电源埋弧自动焊机设计了单片机控制系统。

The UN250 butt-welding machine adopts manual flash prewarming, hydraulic pressure upset mode, is suitable to weld large diameter and section weldment.

UN250焊机采用手动闪光预热、液压顶锻方式，适合焊大直径大截面焊件。

The welding machine has strong anti-electricity fluctuation ability,it is available to produce in small quantity.At the same time,further research should be held on accurancy accouplement.

得出该焊机抗电网波动能力强、可小批量生产，同时还应从精确匹配上进一步研究。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，双翦机，点焊机，冲齿机，辊压机，盘根编织机。

To solve the problems of low quality, low efficiency and high cost of steel mesh reinforcement used in the mines, one kind of special spotwelder was developed.

摘要为解决矿山用钢筋网架生产过程中出现产品质量差、效率低、成本高等问题，研制出一种专用钢筋网架焊机。