The flocculant SPAN is the graft copolymer of different grafing percent of starch-polyacrylamide.

（SPAN）是不同接枝率的演粉与聚丙烯酰胺的接枝共聚物。

A self-consistent field theory (SCFT) for polydisperse polymers grafted to a surface was developed.

建立了表面接枝多分散聚合物的自洽场理论。

Chemical modification including oxygenation, esterify, graft copolymerization and so on.

化学改性主要有氧化、交联、酯化和接枝共聚。

The effects of hexanolactam as electron donor on graft reaction was investigated.

并探讨了己内酰胺作为电子给体添加接枝反应的影响。

Side chain fluorinated epoxy resin was synthesized by laurylfluo-enanthol and bisphenol A epoxy resin.

摘要采用十二氟庚醇与酚A环氧树脂接枝合成了侧链含氟环氧树脂。

This paper presents a reviewal profile of methods on separation and characterization about starch-vinyl graft copolymers.

介绍了常见淀粉–烯类单体接枝共聚产物各成分的分离及其表征方法。

The maleation of ABS by using a single screw extruder and dicumyl peroxide as initiator was studied.

以过氧化二异丙苯为引发，采用单螺杆挤出方法实现了ABS树脂接枝马来酸酐。

Modified larch tannin was prepared by grafting copolymerization and sulfoalkylation, and successfully used as retanning agent, possessing good water solubility and enhanced penetration rate.

利用接枝共聚和磺烷基化的方法松单宁改性。

In this paper,using CCl4 as solventia,MMA reated with chloroperene rubber.A new graft chloroprene rubber adhesive which are low toxicity, high strength, stable store was synthetized.

本文采用四氯化碳做为溶,甲基丙烯酸甲酯与氯丁橡胶在一定压力下进行自由基接枝共聚合。制得了粘接强度高、毒性低、储存稳定性好的新型氯丁胶粘。

The graffing rate and melt index of MAH g PE are investigated.It shows that CALA could decrease crosslinkage degree of the copolymer and improve the flowing property of the melt.

合成过程中少量己内酰胺的加入,在不明显降低接枝物接枝率的情况下可以明显改善接枝物的熔体粘度,提高了接枝物的流动性能。

The flocculant SPAN is the graft copolymer of different grafing percent of starch-polyacrylamide.

絮凝剂（SPAN）是不同率演粉与聚丙烯酰胺共聚物。

A self-consistent field theory (SCFT) for polydisperse polymers grafted to a surface was developed.

建立了表面多散聚合物自洽场理论。

Chemical modification including oxygenation, esterify, graft copolymerization and so on.

化学改性主要有氧化、交联、酯化共聚。

The effects of hexanolactam as electron donor on graft reaction was investigated.

并探讨了己内酰胺作为电子给体添加剂对反应影响。

Side chain fluorinated epoxy resin was synthesized by laurylfluo-enanthol and bisphenol A epoxy resin.

摘要采用十二氟庚醇与酚A环氧树脂合成了侧链含氟环氧树脂。

This paper presents a reviewal profile of methods on separation and characterization about starch-vinyl graft copolymers.

介绍了常见淀粉–烯类单体共聚产物各成离及其表征方法。

The maleation of ABS by using a single screw extruder and dicumyl peroxide as initiator was studied.

以过氧化二异丙苯为引发剂，采用单螺杆挤出方法实现了ABS树脂马来酸酐。

Modified larch tannin was prepared by grafting copolymerization and sulfoalkylation, and successfully used as retanning agent, possessing good water solubility and enhanced penetration rate.

利用共聚磺烷基化方法对落叶松单宁改性。

In this paper,using CCl4 as solventia,MMA reated with chloroperene rubber.A new graft chloroprene rubber adhesive which are low toxicity, high strength, stable store was synthetized.

本文采用四氯化碳做为溶剂,甲基丙烯酸甲酯与氯丁橡胶在一定压力下进行自由基共聚合。制得了粘强度高、毒性低、储存稳定性好新型氯丁胶粘剂。

The graffing rate and melt index of MAH g PE are investigated.It shows that CALA could decrease crosslinkage degree of the copolymer and improve the flowing property of the melt.

合成过程中少量己内酰胺加入,在不明显降低物率情况下可以明显改善物熔体粘度,提高了物流动性能。

The flocculant SPAN is the graft copolymer of different grafing percent of starch-polyacrylamide.

絮凝剂（SPAN）是不同枝率的演粉与聚胺的枝共聚物。

A self-consistent field theory (SCFT) for polydisperse polymers grafted to a surface was developed.

建立了表面枝多分散聚合物的自洽场理论。

Chemical modification including oxygenation, esterify, graft copolymerization and so on.

化学改性主要有氧化、交联、酯化和枝共聚。

The effects of hexanolactam as electron donor on graft reaction was investigated.

并探讨了己内胺作为电子给体添加剂对枝反应的影响。

Side chain fluorinated epoxy resin was synthesized by laurylfluo-enanthol and bisphenol A epoxy resin.

摘要采十二氟庚醇与酚A环氧树脂枝合成了侧链含氟环氧树脂。

This paper presents a reviewal profile of methods on separation and characterization about starch-vinyl graft copolymers.

介绍了常见淀粉–类单体枝共聚产物各成分的分离及其表征方法。

The maleation of ABS by using a single screw extruder and dicumyl peroxide as initiator was studied.

以过氧化二异苯为引发剂，采单螺杆挤出方法实现了ABS树脂枝马来酸酐。

Modified larch tannin was prepared by grafting copolymerization and sulfoalkylation, and successfully used as retanning agent, possessing good water solubility and enhanced penetration rate.

枝共聚和磺烷基化的方法对落叶松单宁改性。

In this paper,using CCl4 as solventia,MMA reated with chloroperene rubber.A new graft chloroprene rubber adhesive which are low toxicity, high strength, stable store was synthetized.

本文采四氯化碳做为溶剂,甲基酸甲酯与氯丁橡胶在一定压力下进行自由基枝共聚合。制得了粘强度高、毒性低、储存稳定性好的新型氯丁胶粘剂。

The graffing rate and melt index of MAH g PE are investigated.It shows that CALA could decrease crosslinkage degree of the copolymer and improve the flowing property of the melt.

合成过程中少量己内胺的加入,在不明显降低枝物枝率的情况下可以明显改善枝物的熔体粘度,提高了枝物的流动性能。

The flocculant SPAN is the graft copolymer of different grafing percent of starch-polyacrylamide.

絮凝剂（SPAN）是不同率的演粉与聚丙烯酰胺的共聚物。

A self-consistent field theory (SCFT) for polydisperse polymers grafted to a surface was developed.

建立了表多分散聚合物的自洽场理论。

Chemical modification including oxygenation, esterify, graft copolymerization and so on.

化学改性主要有氧化、交联、酯化和共聚。

The effects of hexanolactam as electron donor on graft reaction was investigated.

并探讨了己内酰胺作为电子给体添加剂对反应的影响。

Side chain fluorinated epoxy resin was synthesized by laurylfluo-enanthol and bisphenol A epoxy resin.

摘要采用十二氟庚醇与酚A环氧树脂合成了侧链含氟环氧树脂。

This paper presents a reviewal profile of methods on separation and characterization about starch-vinyl graft copolymers.

介绍了常见淀粉–烯类单体共聚产物各成分的分离及其表征法。

The maleation of ABS by using a single screw extruder and dicumyl peroxide as initiator was studied.

以过氧化二异丙苯为引发剂，采用单螺杆挤法实现了ABS树脂马来酸酐。

Modified larch tannin was prepared by grafting copolymerization and sulfoalkylation, and successfully used as retanning agent, possessing good water solubility and enhanced penetration rate.

利用共聚和磺烷基化的法对落叶松单宁改性。

In this paper,using CCl4 as solventia,MMA reated with chloroperene rubber.A new graft chloroprene rubber adhesive which are low toxicity, high strength, stable store was synthetized.

本文采用四氯化碳做为溶剂,甲基丙烯酸甲酯与氯丁橡胶在一定压力下进行自由基共聚合。制得了粘强度高、毒性低、储存稳定性好的新型氯丁胶粘剂。

The graffing rate and melt index of MAH g PE are investigated.It shows that CALA could decrease crosslinkage degree of the copolymer and improve the flowing property of the melt.

合成过程中少量己内酰胺的加入,在不明显降低物率的情况下可以明显改善物的熔体粘度,提高了物的流动性能。

The flocculant SPAN is the graft copolymer of different grafing percent of starch-polyacrylamide.

絮凝剂（SPAN）是不同接枝率的演粉与聚丙烯酰胺的接枝共聚物。

A self-consistent field theory (SCFT) for polydisperse polymers grafted to a surface was developed.

建立表面接枝多分散聚合物的自洽场理论。

Chemical modification including oxygenation, esterify, graft copolymerization and so on.

化学改性主要有氧化、交联、酯化和接枝共聚。

The effects of hexanolactam as electron donor on graft reaction was investigated.

并探讨己内酰胺作为电子给剂对接枝反应的影响。

Side chain fluorinated epoxy resin was synthesized by laurylfluo-enanthol and bisphenol A epoxy resin.

摘要采用十二氟庚醇与酚A环氧树脂接枝合成侧链含氟环氧树脂。

This paper presents a reviewal profile of methods on separation and characterization about starch-vinyl graft copolymers.

介见淀粉–烯类单接枝共聚产物各成分的分离及其表征方法。

The maleation of ABS by using a single screw extruder and dicumyl peroxide as initiator was studied.

以过氧化二异丙苯为引发剂，采用单螺杆挤出方法实现ABS树脂接枝马来酸酐。

Modified larch tannin was prepared by grafting copolymerization and sulfoalkylation, and successfully used as retanning agent, possessing good water solubility and enhanced penetration rate.

利用接枝共聚和磺烷基化的方法对落叶松单宁改性。

In this paper,using CCl4 as solventia,MMA reated with chloroperene rubber.A new graft chloroprene rubber adhesive which are low toxicity, high strength, stable store was synthetized.

本文采用四氯化碳做为溶剂,甲基丙烯酸甲酯与氯丁橡胶在一定压力下进行自由基接枝共聚合。制得粘接强度高、毒性低、储存稳定性好的新型氯丁胶粘剂。

The graffing rate and melt index of MAH g PE are investigated.It shows that CALA could decrease crosslinkage degree of the copolymer and improve the flowing property of the melt.

合成过程中少量己内酰胺的入,在不明显降低接枝物接枝率的情况下可以明显改善接枝物的熔粘度,提高接枝物的流动性能。

The flocculant SPAN is the graft copolymer of different grafing percent of starch-polyacrylamide.

絮凝剂（SPAN）是不同接枝率的演粉与聚丙烯酰胺的接枝共聚物。

A self-consistent field theory (SCFT) for polydisperse polymers grafted to a surface was developed.

表面接枝多分散聚合物的自洽场理论。

Chemical modification including oxygenation, esterify, graft copolymerization and so on.

化学改性主要有氧化、交联、酯化和接枝共聚。

The effects of hexanolactam as electron donor on graft reaction was investigated.

并探讨己内酰胺作为电子给体添加剂对接枝反应的影响。

Side chain fluorinated epoxy resin was synthesized by laurylfluo-enanthol and bisphenol A epoxy resin.

摘要采用十二氟庚醇与酚A环氧脂接枝合成侧链含氟环氧脂。

This paper presents a reviewal profile of methods on separation and characterization about starch-vinyl graft copolymers.

介绍常见淀粉–烯类单体接枝共聚产物各成分的分离及其表征方法。

The maleation of ABS by using a single screw extruder and dicumyl peroxide as initiator was studied.

以过氧化二异丙苯为引发剂，采用单螺杆挤出方法实ABS脂接枝马来酸酐。

Modified larch tannin was prepared by grafting copolymerization and sulfoalkylation, and successfully used as retanning agent, possessing good water solubility and enhanced penetration rate.

利用接枝共聚和磺烷基化的方法对落叶松单宁改性。

In this paper,using CCl4 as solventia,MMA reated with chloroperene rubber.A new graft chloroprene rubber adhesive which are low toxicity, high strength, stable store was synthetized.

本文采用四氯化碳做为溶剂,甲基丙烯酸甲酯与氯丁橡胶在一定压力下进行自由基接枝共聚合。制得粘接强度高、毒性低、储存稳定性好的新型氯丁胶粘剂。

The graffing rate and melt index of MAH g PE are investigated.It shows that CALA could decrease crosslinkage degree of the copolymer and improve the flowing property of the melt.

合成过程中少量己内酰胺的加入,在不明显降低接枝物接枝率的情况下可以明显改善接枝物的熔体粘度,提高接枝物的流动性能。

The flocculant SPAN is the graft copolymer of different grafing percent of starch-polyacrylamide.

絮凝剂（SPAN）是不同接枝率的演粉与聚丙烯酰胺的接枝共聚物。

A self-consistent field theory (SCFT) for polydisperse polymers grafted to a surface was developed.

建立了表面接枝多分散聚合物的自洽场理论。

Chemical modification including oxygenation, esterify, graft copolymerization and so on.

主要有、交联、酯和接枝共聚。

The effects of hexanolactam as electron donor on graft reaction was investigated.

并探讨了己内酰胺作为电子给体添加剂对接枝反应的影响。

Side chain fluorinated epoxy resin was synthesized by laurylfluo-enanthol and bisphenol A epoxy resin.

摘要采用十氟庚醇与酚A环树脂接枝合成了侧链含氟环树脂。

This paper presents a reviewal profile of methods on separation and characterization about starch-vinyl graft copolymers.

介绍了常见淀粉–烯类单体接枝共聚产物各成分的分离及其表征方法。

The maleation of ABS by using a single screw extruder and dicumyl peroxide as initiator was studied.

以过异丙苯为引发剂，采用单螺杆挤出方法实现了ABS树脂接枝马来酸酐。

Modified larch tannin was prepared by grafting copolymerization and sulfoalkylation, and successfully used as retanning agent, possessing good water solubility and enhanced penetration rate.

利用接枝共聚和磺烷基的方法对落叶松单宁。

In this paper,using CCl4 as solventia,MMA reated with chloroperene rubber.A new graft chloroprene rubber adhesive which are low toxicity, high strength, stable store was synthetized.

本文采用四氯碳做为溶剂,甲基丙烯酸甲酯与氯丁橡胶在一定压力下进行自由基接枝共聚合。制得了粘接强度高、毒低、储存稳定好的新型氯丁胶粘剂。

The graffing rate and melt index of MAH g PE are investigated.It shows that CALA could decrease crosslinkage degree of the copolymer and improve the flowing property of the melt.

合成过程中少量己内酰胺的加入,在不明显降低接枝物接枝率的情况下可以明显善接枝物的熔体粘度,提高了接枝物的流动能。

The flocculant SPAN is the graft copolymer of different grafing percent of starch-polyacrylamide.

絮凝剂（SPAN）是不同率的演粉烯酰胺的物。

A self-consistent field theory (SCFT) for polydisperse polymers grafted to a surface was developed.

建立了表面多分散合物的自洽场理论。

Chemical modification including oxygenation, esterify, graft copolymerization and so on.

化学改性主要有氧化、交联、酯化和。

The effects of hexanolactam as electron donor on graft reaction was investigated.

并探讨了己内酰胺作为电子给体添加剂对反应的影响。

Side chain fluorinated epoxy resin was synthesized by laurylfluo-enanthol and bisphenol A epoxy resin.

摘要采用十二氟庚醇酚A环氧树脂合成了侧链含氟环氧树脂。

This paper presents a reviewal profile of methods on separation and characterization about starch-vinyl graft copolymers.

介绍了常见淀粉–烯类单体产物各成分的分离及其表征方法。

The maleation of ABS by using a single screw extruder and dicumyl peroxide as initiator was studied.

以过氧化二异苯为引发剂，采用单螺杆挤出方法实现了ABS树脂马来酸酐。

Modified larch tannin was prepared by grafting copolymerization and sulfoalkylation, and successfully used as retanning agent, possessing good water solubility and enhanced penetration rate.

利用和磺烷基化的方法对落叶松单宁改性。

In this paper,using CCl4 as solventia,MMA reated with chloroperene rubber.A new graft chloroprene rubber adhesive which are low toxicity, high strength, stable store was synthetized.

本文采用四氯化碳做为溶剂,甲基烯酸甲酯氯丁橡胶在一定压力下进行自由基合。制得了粘强度高、毒性低、储存稳定性好的新型氯丁胶粘剂。

The graffing rate and melt index of MAH g PE are investigated.It shows that CALA could decrease crosslinkage degree of the copolymer and improve the flowing property of the melt.

合成过程中少量己内酰胺的加入,在不明显降低物率的情况下可以明显改善物的熔体粘度,提高了物的流动性能。

The flocculant SPAN is the graft copolymer of different grafing percent of starch-polyacrylamide.

絮凝剂（SPAN）是不同率的演粉与聚丙烯酰胺的共聚物。

A self-consistent field theory (SCFT) for polydisperse polymers grafted to a surface was developed.

建立了表多分散聚合物的自洽场理论。

Chemical modification including oxygenation, esterify, graft copolymerization and so on.

化学改性主要有氧化、交联、酯化和共聚。

The effects of hexanolactam as electron donor on graft reaction was investigated.

并探讨了己内酰胺作为电子给体添加剂对反应的影响。

Side chain fluorinated epoxy resin was synthesized by laurylfluo-enanthol and bisphenol A epoxy resin.

摘要采用十二氟庚醇与酚A环氧树脂合成了侧链含氟环氧树脂。

This paper presents a reviewal profile of methods on separation and characterization about starch-vinyl graft copolymers.

介绍了常见淀粉–烯类单体共聚产物各成分的分离及其表征法。

The maleation of ABS by using a single screw extruder and dicumyl peroxide as initiator was studied.

以过氧化二异丙苯为引发剂，采用单螺杆挤法实现了ABS树脂马来酸酐。

Modified larch tannin was prepared by grafting copolymerization and sulfoalkylation, and successfully used as retanning agent, possessing good water solubility and enhanced penetration rate.

利用共聚和磺烷基化的法对落叶松单宁改性。

In this paper,using CCl4 as solventia,MMA reated with chloroperene rubber.A new graft chloroprene rubber adhesive which are low toxicity, high strength, stable store was synthetized.

本文采用四氯化碳做为溶剂,甲基丙烯酸甲酯与氯丁橡胶在一定压力下进行自由基共聚合。制得了粘强度高、毒性低、储存稳定性好的新型氯丁胶粘剂。

The graffing rate and melt index of MAH g PE are investigated.It shows that CALA could decrease crosslinkage degree of the copolymer and improve the flowing property of the melt.

合成过程中少量己内酰胺的加入,在不明显降低物率的情况下可以明显改善物的熔体粘度,提高了物的流动性能。