Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.
截面畸变是薄壁管小弯曲半径数控弯曲成形容易出现的成形缺陷之一。
Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.
截面畸变是薄壁管小弯曲半径数控弯曲成形容易出现的成形缺陷之一。
When I washed the jumper, it just turned into a shapeless mass.
这套头衫我一洗就不成形了。
Objective To evaluate the treatment effect of gingivoplasty with Argon laser.
目的评氩离子激光龈成形术临床使用效果。
Constant current output characteristics,deep melting penetration,even w-elding pool,and excellent weld.
具有恒流输出特征,熔透深,熔池均匀,焊缝成形良好。
Ratching in roving.
粗纱成形齿轮。
Objective To study the improved extrapleural thoracoplasty in the treatment of chronic trberculous empyema.
目的研究改良胸腔内胸廓成形术在慢性结核性脓胸治的
。
The dressing device with pendulant electrode was designed based on the requirement of arc-forming wheel.
据圆弧成形砂轮的修
需要,研制了摆动电极式电火花修
装置。
Conclusion Pharyngoplasty combined with speech therapy is effective in the treatment of patients with CVPI.
结论咽成形术与语音治相结合是一种较理想的CVPI治
法。
A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.
通过模拟得到了带孔网板和无孔板成形球面件时不起皱成形极限与板厚的关系曲线。
Objective: To investigate the causes and treatment of recurrent tracheal stenosis after tracheoplasty.
探讨气管成形术后再狭窄的原因及处理。
There are lots of advantages by cold extrusion for straight knurl nut in a single process.
直纹滚花螺母采用冷挤压一次成形新工艺 ,成效显著。
OBJECTIVE To study the feasibility andthe surgical techniques of the epiglottis laryngoplasty inpartial laryngectomy for glottic carcinoma.
目的探讨会厌喉成形术的可行性及手术法。
Conclusion The combined diverticulo-sphincteroplasty is simpl,safe,effective for the treatment of juxta-ampullary diverticula.
结论憩室-括约肌联合成形术既简单、安全、有效,又保持生理通道是治壶腹旁憩室的可取术式。
Objective To inquire into the clinical effect of dacryagogic plastic operation by KTP laser to treat dacryagogatresia.
目的探讨KTP激光泪道成形术治泪道阻塞的临床效果。
We anastomosed the suprahepatic inferior vena cava to the annexed vena cava in a modified piggy-back figuration.
肝上下腔静脉吻合应用附加腔静脉成形-改良背驮式。
Objective To analyze and summarize the outcomes of treatment o f aiguillette collision injury by improved foreacromioplasty.
目的分析、总结、改良前肩峰成形术治肩部撞击症的临床
效。
Asphyxia death mostly took place during anesthesia induction and convalescence as patients experienced general anesthesia for descending uranostaphyloplasty(uppp).
全麻下行悬雍垂腭咽成形术时,窒息死亡多发生在麻醉诱导期和麻醉恢复期。
Conclusion:The modificated epiglottic laryngoplasty was effective surgical method for the patients with glottic carcinoma (T3 category).
改良会厌喉成形术是治声门癌T3病变有效的手术
法。
Method Conjunctival sac blepharoplasty by skin transplanting and blepharorrhaphy were performed in the same period of HA orbital implantation.
法羟基磷灰石义眼台植入同期行中厚皮片游离移植结膜囊成形术联合睑缘粘连性缝合术。
Abstract: There are lots of advantages by cold extrusion for straight knurl nut in a single process.
摘 要: 直纹滚花螺母采用冷挤压一次成形新工艺,成效显著。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.
截是薄壁管小弯曲半径数控弯曲成形容易出现的成形缺陷之一。
When I washed the jumper, it just turned into a shapeless mass.
这套头衫我一洗就不成形了。
Objective To evaluate the treatment effect of gingivoplasty with Argon laser.
目的评价氩离子激光龈成形术临床使用效果。
Constant current output characteristics,deep melting penetration,even w-elding pool,and excellent weld.
具有恒流输出特征,熔透深,熔池均匀,焊缝成形良好。
Ratching in roving.
粗纱成形齿轮。
Objective To study the improved extrapleural thoracoplasty in the treatment of chronic trberculous empyema.
目的研究改良胸腔内胸廓成形术在慢性结核性脓胸治疗的价值。
The dressing device with pendulant electrode was designed based on the requirement of arc-forming wheel.
根据圆弧成形砂轮的修需要,研制了摆动电极式电火花修
装置。
Conclusion Pharyngoplasty combined with speech therapy is effective in the treatment of patients with CVPI.
结论咽成形术与语音治疗相结合是一种较理想的CVPI治疗方法。
A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.
通过模拟得到了带孔网板和无孔板成形球件时不起皱成形极限与板厚的关系曲线。
Objective: To investigate the causes and treatment of recurrent tracheal stenosis after tracheoplasty.
探讨气管成形术后再狭窄的原因及处理。
There are lots of advantages by cold extrusion for straight knurl nut in a single process.
直纹滚花螺母采用冷挤压一次成形新工艺 ,成效显著。
OBJECTIVE To study the feasibility andthe surgical techniques of the epiglottis laryngoplasty inpartial laryngectomy for glottic carcinoma.
目的探讨会厌喉成形术的可行性及手术方法。
Conclusion The combined diverticulo-sphincteroplasty is simpl,safe,effective for the treatment of juxta-ampullary diverticula.
结论憩室-括约肌联合成形术既简单、、有效,又保持生理通道是治疗壶腹旁憩室的可取术式。
Objective To inquire into the clinical effect of dacryagogic plastic operation by KTP laser to treat dacryagogatresia.
目的探讨KTP激光泪道成形术治疗泪道阻塞的临床效果。
We anastomosed the suprahepatic inferior vena cava to the annexed vena cava in a modified piggy-back figuration.
肝上下腔静脉吻合应用附加腔静脉成形-改良背驮式。
Objective To analyze and summarize the outcomes of treatment o f aiguillette collision injury by improved foreacromioplasty.
目的分析、总结、改良前肩峰成形术治疗肩部撞击症的临床疗效。
Asphyxia death mostly took place during anesthesia induction and convalescence as patients experienced general anesthesia for descending uranostaphyloplasty(uppp).
麻下行悬雍垂腭咽成形术时,窒息死亡多发生在麻醉诱导期和麻醉恢复期。
Conclusion:The modificated epiglottic laryngoplasty was effective surgical method for the patients with glottic carcinoma (T3 category).
改良会厌喉成形术是治疗声门癌T3病有效的手术方法。
Method Conjunctival sac blepharoplasty by skin transplanting and blepharorrhaphy were performed in the same period of HA orbital implantation.
方法羟基磷灰石义眼台植入同期行中厚皮片游离移植结膜囊成形术联合睑缘粘连性缝合术。
Abstract: There are lots of advantages by cold extrusion for straight knurl nut in a single process.
摘 要: 直纹滚花螺母采用冷挤压一次成形新工艺,成效显著。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.
截面畸变是薄壁管小弯曲半径数控弯曲成形容易出现的成形缺陷之一。
When I washed the jumper, it just turned into a shapeless mass.
这套头衫我一洗就不成形了。
Objective To evaluate the treatment effect of gingivoplasty with Argon laser.
目的评价氩离子激光龈成形术临床使用效果。
Constant current output characteristics,deep melting penetration,even w-elding pool,and excellent weld.
具有恒流输出特征,熔透深,熔池均匀,焊缝成形良好。
Ratching in roving.
粗纱成形齿轮。
Objective To study the improved extrapleural thoracoplasty in the treatment of chronic trberculous empyema.
目的究改良胸腔内胸廓成形术在慢性结核性脓胸
的价值。
The dressing device with pendulant electrode was designed based on the requirement of arc-forming wheel.
根据圆弧成形砂轮的修需
,
了摆动电极式电火花修
装置。
Conclusion Pharyngoplasty combined with speech therapy is effective in the treatment of patients with CVPI.
结论咽成形术与语相结合是一种较理想的CVPI
方法。
A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.
通过模拟得到了带孔网板和无孔板成形球面件时不起皱成形极限与板厚的关系曲线。
Objective: To investigate the causes and treatment of recurrent tracheal stenosis after tracheoplasty.
探讨气管成形术后再狭窄的原因及处理。
There are lots of advantages by cold extrusion for straight knurl nut in a single process.
直纹滚花螺母采用冷挤压一次成形新工艺 ,成效显著。
OBJECTIVE To study the feasibility andthe surgical techniques of the epiglottis laryngoplasty inpartial laryngectomy for glottic carcinoma.
目的探讨会厌喉成形术的可行性及手术方法。
Conclusion The combined diverticulo-sphincteroplasty is simpl,safe,effective for the treatment of juxta-ampullary diverticula.
结论憩室-括约肌联合成形术既简单、安全、有效,又保持生理通道是壶腹旁憩室的可取术式。
Objective To inquire into the clinical effect of dacryagogic plastic operation by KTP laser to treat dacryagogatresia.
目的探讨KTP激光泪道成形术泪道阻塞的临床效果。
We anastomosed the suprahepatic inferior vena cava to the annexed vena cava in a modified piggy-back figuration.
肝上下腔静脉吻合应用附加腔静脉成形-改良背驮式。
Objective To analyze and summarize the outcomes of treatment o f aiguillette collision injury by improved foreacromioplasty.
目的分析、总结、改良前肩峰成形术肩部撞击症的临床
效。
Asphyxia death mostly took place during anesthesia induction and convalescence as patients experienced general anesthesia for descending uranostaphyloplasty(uppp).
全麻下行悬雍垂腭咽成形术时,窒息死亡多发生在麻醉诱导期和麻醉恢复期。
Conclusion:The modificated epiglottic laryngoplasty was effective surgical method for the patients with glottic carcinoma (T3 category).
改良会厌喉成形术是声门癌T3病变有效的手术方法。
Method Conjunctival sac blepharoplasty by skin transplanting and blepharorrhaphy were performed in the same period of HA orbital implantation.
方法羟基磷灰石义眼台植入同期行中厚皮片游离移植结膜囊成形术联合睑缘粘连性缝合术。
Abstract: There are lots of advantages by cold extrusion for straight knurl nut in a single process.
摘 : 直纹滚花螺母采用冷挤压一次成形新工艺,成效显著。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.
截面畸变是薄壁管小弯曲半径数控弯曲成形容易出现的成形缺陷之。
When I washed the jumper, it just turned into a shapeless mass.
这套头洗就不成形了。
Objective To evaluate the treatment effect of gingivoplasty with Argon laser.
目的评价氩离子激光龈成形术临床使用效果。
Constant current output characteristics,deep melting penetration,even w-elding pool,and excellent weld.
具有恒流输出特征,熔透深,熔池均匀,焊缝成形良好。
Ratching in roving.
粗纱成形齿轮。
Objective To study the improved extrapleural thoracoplasty in the treatment of chronic trberculous empyema.
目的研究改良胸腔内胸廓成形术在慢性结核性脓胸治疗的价值。
The dressing device with pendulant electrode was designed based on the requirement of arc-forming wheel.
根据圆弧成形砂轮的修需要,研制了摆动电极式电火花修
装置。
Conclusion Pharyngoplasty combined with speech therapy is effective in the treatment of patients with CVPI.
结论咽成形术与语音治疗相结合是种较理想的CVPI治疗方法。
A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.
通过模拟得到了带孔网板和无孔板成形球面件时不起皱成形极限与板厚的关系曲线。
Objective: To investigate the causes and treatment of recurrent tracheal stenosis after tracheoplasty.
气管成形术后再狭窄的原因及处理。
There are lots of advantages by cold extrusion for straight knurl nut in a single process.
直纹滚花螺母采用冷挤压次成形新工艺 ,成效显著。
OBJECTIVE To study the feasibility andthe surgical techniques of the epiglottis laryngoplasty inpartial laryngectomy for glottic carcinoma.
目的厌喉成形术的可行性及手术方法。
Conclusion The combined diverticulo-sphincteroplasty is simpl,safe,effective for the treatment of juxta-ampullary diverticula.
结论憩室-括约肌联合成形术既简单、安全、有效,又保持生理通道是治疗壶腹旁憩室的可取术式。
Objective To inquire into the clinical effect of dacryagogic plastic operation by KTP laser to treat dacryagogatresia.
目的KTP激光泪道成形术治疗泪道阻塞的临床效果。
We anastomosed the suprahepatic inferior vena cava to the annexed vena cava in a modified piggy-back figuration.
肝上下腔静脉吻合应用附加腔静脉成形-改良背驮式。
Objective To analyze and summarize the outcomes of treatment o f aiguillette collision injury by improved foreacromioplasty.
目的分析、总结、改良前肩峰成形术治疗肩部撞击症的临床疗效。
Asphyxia death mostly took place during anesthesia induction and convalescence as patients experienced general anesthesia for descending uranostaphyloplasty(uppp).
全麻下行悬雍垂腭咽成形术时,窒息死亡多发生在麻醉诱导期和麻醉恢复期。
Conclusion:The modificated epiglottic laryngoplasty was effective surgical method for the patients with glottic carcinoma (T3 category).
改良厌喉成形术是治疗声门癌T3病变有效的手术方法。
Method Conjunctival sac blepharoplasty by skin transplanting and blepharorrhaphy were performed in the same period of HA orbital implantation.
方法羟基磷灰石义眼台植入同期行中厚皮片游离移植结膜囊成形术联合睑缘粘连性缝合术。
Abstract: There are lots of advantages by cold extrusion for straight knurl nut in a single process.
摘 要: 直纹滚花螺母采用冷挤压次成形新工艺,成效显著。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向们指正。
Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.
截面畸变是薄壁管小弯曲半径数控弯曲成容易出现的成
缺陷之一。
When I washed the jumper, it just turned into a shapeless mass.
这套头衫我一洗就不成了。
Objective To evaluate the treatment effect of gingivoplasty with Argon laser.
目的评价氩离子激光龈成临床使用效果。
Constant current output characteristics,deep melting penetration,even w-elding pool,and excellent weld.
具有恒流输出特征,熔透深,熔池均匀,焊缝成良好。
Ratching in roving.
粗纱成齿轮。
Objective To study the improved extrapleural thoracoplasty in the treatment of chronic trberculous empyema.
目的研究改良胸腔内胸廓成慢性结核性脓胸治疗的价值。
The dressing device with pendulant electrode was designed based on the requirement of arc-forming wheel.
根据圆弧成砂轮的修
需要,研制了摆动电极式电火花修
装置。
Conclusion Pharyngoplasty combined with speech therapy is effective in the treatment of patients with CVPI.
结论咽成与语音治疗相结合是一种较理想的CVPI治疗方法。
A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.
通过模拟得到了带孔网孔
成
球面件时不起皱成
极限与
厚的关系曲线。
Objective: To investigate the causes and treatment of recurrent tracheal stenosis after tracheoplasty.
探讨气管成后再狭窄的原因及处理。
There are lots of advantages by cold extrusion for straight knurl nut in a single process.
直纹滚花螺母采用冷挤压一次成新工艺 ,成效显著。
OBJECTIVE To study the feasibility andthe surgical techniques of the epiglottis laryngoplasty inpartial laryngectomy for glottic carcinoma.
目的探讨会厌喉成的可行性及手
方法。
Conclusion The combined diverticulo-sphincteroplasty is simpl,safe,effective for the treatment of juxta-ampullary diverticula.
结论憩室-括约肌联合成既简单、安全、有效,又保持生理通道是治疗壶腹旁憩室的可取
式。
Objective To inquire into the clinical effect of dacryagogic plastic operation by KTP laser to treat dacryagogatresia.
目的探讨KTP激光泪道成治疗泪道阻塞的临床效果。
We anastomosed the suprahepatic inferior vena cava to the annexed vena cava in a modified piggy-back figuration.
肝上下腔静脉吻合应用附加腔静脉成-改良背驮式。
Objective To analyze and summarize the outcomes of treatment o f aiguillette collision injury by improved foreacromioplasty.
目的分析、总结、改良前肩峰成治疗肩部撞击症的临床疗效。
Asphyxia death mostly took place during anesthesia induction and convalescence as patients experienced general anesthesia for descending uranostaphyloplasty(uppp).
全麻下行悬雍垂腭咽成时,窒息死亡多发生
麻醉诱导期
麻醉恢复期。
Conclusion:The modificated epiglottic laryngoplasty was effective surgical method for the patients with glottic carcinoma (T3 category).
改良会厌喉成是治疗声门癌T3病变有效的手
方法。
Method Conjunctival sac blepharoplasty by skin transplanting and blepharorrhaphy were performed in the same period of HA orbital implantation.
方法羟基磷灰石义眼台植入同期行中厚皮片游离移植结膜囊成联合睑缘粘连性缝合
。
Abstract: There are lots of advantages by cold extrusion for straight knurl nut in a single process.
摘 要: 直纹滚花螺母采用冷挤压一次成新工艺,成效显著。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.
截面畸变是薄壁管小弯曲半径数控弯曲成形容易出现的成形缺陷之一。
When I washed the jumper, it just turned into a shapeless mass.
这套头衫我一洗就成形了。
Objective To evaluate the treatment effect of gingivoplasty with Argon laser.
目的评价氩离子激光龈成形术临床使用效果。
Constant current output characteristics,deep melting penetration,even w-elding pool,and excellent weld.
具有恒流输出特征,熔透深,熔池均匀,焊缝成形好。
Ratching in roving.
粗纱成形齿轮。
Objective To study the improved extrapleural thoracoplasty in the treatment of chronic trberculous empyema.
目的研胸腔内胸廓成形术在慢性结核性脓胸治疗的价值。
The dressing device with pendulant electrode was designed based on the requirement of arc-forming wheel.
根据圆弧成形砂轮的修需要,研制了摆动电极式电火花修
装置。
Conclusion Pharyngoplasty combined with speech therapy is effective in the treatment of patients with CVPI.
结论咽成形术与语音治疗相结合是一种较理想的CVPI治疗方法。
A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.
通过模拟得到了带孔网板和无孔板成形球面件起皱成形极限与板厚的关系曲线。
Objective: To investigate the causes and treatment of recurrent tracheal stenosis after tracheoplasty.
探讨气管成形术后再狭窄的原因及处理。
There are lots of advantages by cold extrusion for straight knurl nut in a single process.
直纹滚花螺母采用冷挤压一次成形新工艺 ,成效显著。
OBJECTIVE To study the feasibility andthe surgical techniques of the epiglottis laryngoplasty inpartial laryngectomy for glottic carcinoma.
目的探讨会厌喉成形术的可行性及手术方法。
Conclusion The combined diverticulo-sphincteroplasty is simpl,safe,effective for the treatment of juxta-ampullary diverticula.
结论憩室-括约肌联合成形术既简单、安全、有效,又保持生理通道是治疗壶腹旁憩室的可取术式。
Objective To inquire into the clinical effect of dacryagogic plastic operation by KTP laser to treat dacryagogatresia.
目的探讨KTP激光泪道成形术治疗泪道阻塞的临床效果。
We anastomosed the suprahepatic inferior vena cava to the annexed vena cava in a modified piggy-back figuration.
肝上下腔静脉吻合应用附加腔静脉成形-背驮式。
Objective To analyze and summarize the outcomes of treatment o f aiguillette collision injury by improved foreacromioplasty.
目的分析、总结、前肩峰成形术治疗肩部撞击症的临床疗效。
Asphyxia death mostly took place during anesthesia induction and convalescence as patients experienced general anesthesia for descending uranostaphyloplasty(uppp).
全麻下行悬雍垂腭咽成形术,窒息死亡多发生在麻醉诱导期和麻醉恢复期。
Conclusion:The modificated epiglottic laryngoplasty was effective surgical method for the patients with glottic carcinoma (T3 category).
会厌喉成形术是治疗声门癌T3病变有效的手术方法。
Method Conjunctival sac blepharoplasty by skin transplanting and blepharorrhaphy were performed in the same period of HA orbital implantation.
方法羟基磷灰石义眼台植入同期行中厚皮片游离移植结膜囊成形术联合睑缘粘连性缝合术。
Abstract: There are lots of advantages by cold extrusion for straight knurl nut in a single process.
摘 要: 直纹滚花螺母采用冷挤压一次成形新工艺,成效显著。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦代表本软件的观点;若发现问题,欢迎向我们指正。
Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.
截面畸变是薄壁管小弯曲半径数控弯曲容易出现的
缺陷之一。
When I washed the jumper, it just turned into a shapeless mass.
这套头衫我一洗就了。
Objective To evaluate the treatment effect of gingivoplasty with Argon laser.
目的评价氩离子激光龈术临床使用
果。
Constant current output characteristics,deep melting penetration,even w-elding pool,and excellent weld.
具有恒流输出特征,熔透深,熔池均匀,焊缝良好。
Ratching in roving.
粗纱齿轮。
Objective To study the improved extrapleural thoracoplasty in the treatment of chronic trberculous empyema.
目的研究改良胸腔内胸廓术在慢性结核性脓胸治疗的价值。
The dressing device with pendulant electrode was designed based on the requirement of arc-forming wheel.
根据圆弧砂轮的修
需要,研制了摆动电极式电火花修
装置。
Conclusion Pharyngoplasty combined with speech therapy is effective in the treatment of patients with CVPI.
结论咽术与语音治疗相结合是一种较理想的CVPI治疗方法。
A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.
通过模拟得到了带孔网板和无孔板球面件时
起皱
极限与板厚的关系曲线。
Objective: To investigate the causes and treatment of recurrent tracheal stenosis after tracheoplasty.
探讨气管术后再狭窄的原因及处理。
There are lots of advantages by cold extrusion for straight knurl nut in a single process.
直纹滚花螺母采用冷挤压一次新工艺 ,
。
OBJECTIVE To study the feasibility andthe surgical techniques of the epiglottis laryngoplasty inpartial laryngectomy for glottic carcinoma.
目的探讨会厌喉术的可行性及手术方法。
Conclusion The combined diverticulo-sphincteroplasty is simpl,safe,effective for the treatment of juxta-ampullary diverticula.
结论憩室-括约肌联合术既简单、安全、有
,又保持生理通道是治疗壶腹旁憩室的可取术式。
Objective To inquire into the clinical effect of dacryagogic plastic operation by KTP laser to treat dacryagogatresia.
目的探讨KTP激光泪道术治疗泪道阻塞的临床
果。
We anastomosed the suprahepatic inferior vena cava to the annexed vena cava in a modified piggy-back figuration.
肝上下腔静脉吻合应用附加腔静脉-改良背驮式。
Objective To analyze and summarize the outcomes of treatment o f aiguillette collision injury by improved foreacromioplasty.
目的分析、总结、改良前肩峰术治疗肩部撞击症的临床疗
。
Asphyxia death mostly took place during anesthesia induction and convalescence as patients experienced general anesthesia for descending uranostaphyloplasty(uppp).
全麻下行悬雍垂腭咽术时,窒息死亡多发生在麻醉诱导期和麻醉恢复期。
Conclusion:The modificated epiglottic laryngoplasty was effective surgical method for the patients with glottic carcinoma (T3 category).
改良会厌喉术是治疗声门癌T3病变有
的手术方法。
Method Conjunctival sac blepharoplasty by skin transplanting and blepharorrhaphy were performed in the same period of HA orbital implantation.
方法羟基磷灰石义眼台植入同期行中厚皮片游离移植结膜囊术联合睑缘粘连性缝合术。
Abstract: There are lots of advantages by cold extrusion for straight knurl nut in a single process.
摘 要: 直纹滚花螺母采用冷挤压一次新工艺,
。
声明:以上例句、词性分类均由互联网资源自动生,部分未经过人工审核,其表达内容亦
代表本软件的观点;若发现问题,欢迎向我们指正。
Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.
截面畸变是薄壁管小弯曲半径数控弯曲成形容易出现的成形缺陷之一。
When I washed the jumper, it just turned into a shapeless mass.
这套头衫我一洗就不成形了。
Objective To evaluate the treatment effect of gingivoplasty with Argon laser.
目的评氩离子激光龈成形术临床使用效果。
Constant current output characteristics,deep melting penetration,even w-elding pool,and excellent weld.
具有恒流输出特征,熔透深,熔池均匀,焊缝成形良好。
Ratching in roving.
粗纱成形齿轮。
Objective To study the improved extrapleural thoracoplasty in the treatment of chronic trberculous empyema.
目的研究改良胸腔内胸廓成形术在慢性结核性脓胸治的
。
The dressing device with pendulant electrode was designed based on the requirement of arc-forming wheel.
据圆弧成形砂轮的修
需要,研制了摆动电极式电火花修
装置。
Conclusion Pharyngoplasty combined with speech therapy is effective in the treatment of patients with CVPI.
结论咽成形术与语音治相结合是一种较理想的CVPI治
法。
A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.
通过模拟得到了带孔网板和无孔板成形球面件时不起皱成形极限与板厚的关系曲线。
Objective: To investigate the causes and treatment of recurrent tracheal stenosis after tracheoplasty.
探讨气管成形术后再狭窄的原因及处理。
There are lots of advantages by cold extrusion for straight knurl nut in a single process.
直纹滚花螺母采用冷挤压一次成形新工艺 ,成效显著。
OBJECTIVE To study the feasibility andthe surgical techniques of the epiglottis laryngoplasty inpartial laryngectomy for glottic carcinoma.
目的探讨会厌喉成形术的可行性及手术法。
Conclusion The combined diverticulo-sphincteroplasty is simpl,safe,effective for the treatment of juxta-ampullary diverticula.
结论憩室-括约肌联合成形术既简单、安全、有效,又保持生理通道是治壶腹旁憩室的可取术式。
Objective To inquire into the clinical effect of dacryagogic plastic operation by KTP laser to treat dacryagogatresia.
目的探讨KTP激光泪道成形术治泪道阻塞的临床效果。
We anastomosed the suprahepatic inferior vena cava to the annexed vena cava in a modified piggy-back figuration.
肝上下腔静脉吻合应用附加腔静脉成形-改良背驮式。
Objective To analyze and summarize the outcomes of treatment o f aiguillette collision injury by improved foreacromioplasty.
目的分析、总结、改良前肩峰成形术治肩部撞击症的临床
效。
Asphyxia death mostly took place during anesthesia induction and convalescence as patients experienced general anesthesia for descending uranostaphyloplasty(uppp).
全麻下行悬雍垂腭咽成形术时,窒息死亡多发生在麻醉诱导期和麻醉恢复期。
Conclusion:The modificated epiglottic laryngoplasty was effective surgical method for the patients with glottic carcinoma (T3 category).
改良会厌喉成形术是治声门癌T3病变有效的手术
法。
Method Conjunctival sac blepharoplasty by skin transplanting and blepharorrhaphy were performed in the same period of HA orbital implantation.
法羟基磷灰石义眼台植入同期行中厚皮片游离移植结膜囊成形术联合睑缘粘连性缝合术。
Abstract: There are lots of advantages by cold extrusion for straight knurl nut in a single process.
摘 要: 直纹滚花螺母采用冷挤压一次成形新工艺,成效显著。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.
截面畸变是薄壁管小弯曲控弯曲成形容易出现的成形缺陷之一。
When I washed the jumper, it just turned into a shapeless mass.
这套头衫我一洗就不成形了。
Objective To evaluate the treatment effect of gingivoplasty with Argon laser.
目的评价氩离子激光龈成形术临床使用效果。
Constant current output characteristics,deep melting penetration,even w-elding pool,and excellent weld.
具有恒流输出特征,熔透深,熔池均匀,焊缝成形良好。
Ratching in roving.
粗纱成形齿轮。
Objective To study the improved extrapleural thoracoplasty in the treatment of chronic trberculous empyema.
目的研究改良胸腔内胸廓成形术在慢性结核性脓胸治疗的价值。
The dressing device with pendulant electrode was designed based on the requirement of arc-forming wheel.
根据圆弧成形砂轮的修需要,研制了摆动电极式电火花修
装置。
Conclusion Pharyngoplasty combined with speech therapy is effective in the treatment of patients with CVPI.
结论咽成形术与语音治疗相结合是一种较理想的CVPI治疗方法。
A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.
通过模拟得到了带孔网板和无孔板成形球面件时不起皱成形极限与板厚的关系曲线。
Objective: To investigate the causes and treatment of recurrent tracheal stenosis after tracheoplasty.
探讨气管成形术后再狭窄的原因及处理。
There are lots of advantages by cold extrusion for straight knurl nut in a single process.
直纹滚花螺母采用冷挤压一次成形新工艺 ,成效显著。
OBJECTIVE To study the feasibility andthe surgical techniques of the epiglottis laryngoplasty inpartial laryngectomy for glottic carcinoma.
目的探讨会厌喉成形术的可行性及手术方法。
Conclusion The combined diverticulo-sphincteroplasty is simpl,safe,effective for the treatment of juxta-ampullary diverticula.
结论憩室-括合成形术既简单、安全、有效,又保持生理通道是治疗壶腹旁憩室的可取术式。
Objective To inquire into the clinical effect of dacryagogic plastic operation by KTP laser to treat dacryagogatresia.
目的探讨KTP激光泪道成形术治疗泪道阻塞的临床效果。
We anastomosed the suprahepatic inferior vena cava to the annexed vena cava in a modified piggy-back figuration.
肝上下腔静脉吻合应用附加腔静脉成形-改良背驮式。
Objective To analyze and summarize the outcomes of treatment o f aiguillette collision injury by improved foreacromioplasty.
目的分析、总结、改良前肩峰成形术治疗肩部撞击症的临床疗效。
Asphyxia death mostly took place during anesthesia induction and convalescence as patients experienced general anesthesia for descending uranostaphyloplasty(uppp).
全麻下行悬雍垂腭咽成形术时,窒息死亡多发生在麻醉诱导期和麻醉恢复期。
Conclusion:The modificated epiglottic laryngoplasty was effective surgical method for the patients with glottic carcinoma (T3 category).
改良会厌喉成形术是治疗声门癌T3病变有效的手术方法。
Method Conjunctival sac blepharoplasty by skin transplanting and blepharorrhaphy were performed in the same period of HA orbital implantation.
方法羟基磷灰石义眼台植入同期行中厚皮片游离移植结膜囊成形术合睑缘粘连性缝合术。
Abstract: There are lots of advantages by cold extrusion for straight knurl nut in a single process.
摘 要: 直纹滚花螺母采用冷挤压一次成形新工艺,成效显著。
声明:以上例句、词性分类均由互网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.
截面畸变是薄壁管小弯曲半径数控弯曲成容易出现的成
缺陷之
。
When I washed the jumper, it just turned into a shapeless mass.
这套头衫我洗就不成
了。
Objective To evaluate the treatment effect of gingivoplasty with Argon laser.
目的评价氩离子激光龈成术临床使用效果。
Constant current output characteristics,deep melting penetration,even w-elding pool,and excellent weld.
具有恒流输出特征,熔透深,熔池均匀,焊缝成良好。
Ratching in roving.
粗纱成齿
。
Objective To study the improved extrapleural thoracoplasty in the treatment of chronic trberculous empyema.
目的研究改良胸腔内胸廓成术在慢性结核性脓胸治疗的价值。
The dressing device with pendulant electrode was designed based on the requirement of arc-forming wheel.
根据圆弧成的修
需要,研制了摆动电极式电火花修
装置。
Conclusion Pharyngoplasty combined with speech therapy is effective in the treatment of patients with CVPI.
结论咽成术与语音治疗相结合是
理想的CVPI治疗方法。
A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.
通过模拟得到了带孔网板和无孔板成球面件时不起皱成
极限与板厚的关系曲线。
Objective: To investigate the causes and treatment of recurrent tracheal stenosis after tracheoplasty.
探讨气管成术后再狭窄的原因及处理。
There are lots of advantages by cold extrusion for straight knurl nut in a single process.
直纹滚花螺母采用冷挤压次成
新工艺 ,成效显著。
OBJECTIVE To study the feasibility andthe surgical techniques of the epiglottis laryngoplasty inpartial laryngectomy for glottic carcinoma.
目的探讨会厌喉成术的可行性及手术方法。
Conclusion The combined diverticulo-sphincteroplasty is simpl,safe,effective for the treatment of juxta-ampullary diverticula.
结论憩室-括约肌联合成术既简单、安全、有效,又保持生理通道是治疗壶腹旁憩室的可取术式。
Objective To inquire into the clinical effect of dacryagogic plastic operation by KTP laser to treat dacryagogatresia.
目的探讨KTP激光泪道成术治疗泪道阻塞的临床效果。
We anastomosed the suprahepatic inferior vena cava to the annexed vena cava in a modified piggy-back figuration.
肝上下腔静脉吻合应用附加腔静脉成-改良背驮式。
Objective To analyze and summarize the outcomes of treatment o f aiguillette collision injury by improved foreacromioplasty.
目的分析、总结、改良前肩峰成术治疗肩部撞击症的临床疗效。
Asphyxia death mostly took place during anesthesia induction and convalescence as patients experienced general anesthesia for descending uranostaphyloplasty(uppp).
全麻下行悬雍垂腭咽成术时,窒息死亡多发生在麻醉诱导期和麻醉恢复期。
Conclusion:The modificated epiglottic laryngoplasty was effective surgical method for the patients with glottic carcinoma (T3 category).
改良会厌喉成术是治疗声门癌T3病变有效的手术方法。
Method Conjunctival sac blepharoplasty by skin transplanting and blepharorrhaphy were performed in the same period of HA orbital implantation.
方法羟基磷灰石义眼台植入同期行中厚皮片游离移植结膜囊成术联合睑缘粘连性缝合术。
Abstract: There are lots of advantages by cold extrusion for straight knurl nut in a single process.
摘 要: 直纹滚花螺母采用冷挤压次成
新工艺,成效显著。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。