The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给了斜航式法向圆弧螺旋锥齿轮的参数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对一模语言UML、最新模工具软件UNIFACE和立库存管理的ABC分析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航测、真实三维模和地理信开发业务于一体的综合地理信生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模的方法,立了气动潜孔冲击器的概念模型、装配模型和零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在研制，并实现了集筑模器-结构分析器-仿真演示器于一体的三器一体化的筑工程辅助设计和软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该，着重分析和开发了石材铺设的参数化分割和编号、石材的艺术拼花、石材加工信在不同软件的通信即加工单的开立、以及旋转楼梯扶手石材贴片空间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层模方法和模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压的基本方程入手，对双三角钻臂变幅机构进行了机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学和切削理论对单点金刚石加工时的工件端面切削及“飞切”加工进行了仿真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对统一模语言UML、最新模具软件UNIFACE和立库存管理的ABC分析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航测、真实三维模和地理息系统开发业务于一体的综合地理息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模的方法,立了气动潜孔冲击器的概念模型、装配模型和零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集筑模器-结构分析器-仿真演示器于一体的三器一体化的筑程辅助设计和软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系统中，着重分析和开发了石材铺设的参数化分割和编号、石材的艺术拼花、石材息在不同软件中的通即单的开立、以及旋转楼梯扶手石材贴片空间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层模方法和模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学和切削理论对单点金刚石时的件端面切削及“飞切”进行了仿真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜式法向圆弧螺旋锥齿轮的参数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对统一模语言UML、最新模工具软件UNIFACE和立库存管理的ABC分法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集影、测、真实三维模和地理信息系统开发业务于一体的综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模的方法,立了气动潜孔冲击的概念模型、装配模型和零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集筑模-结构分-真演示于一体的三一体化的筑工程辅助设计和软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系统中，着重分和开发了石材铺设的参数化分割和编号、石材的艺术拼花、石材加工信息在不同软件中的通信即加工单的开立、以及旋转楼梯扶手石材贴片间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层模方法和模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学和切削理论对单点金刚石加工时的工件端面切削及“飞切”加工进行了真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对一语言UML、最新工具软件UNIFACE和立库存管理的ABC分析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航测、真实三维和地理信息开发业务于一体的综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品的方法,立了气动潜孔冲击器的概念型、装配型和零件型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在研制中，提出并实现了集筑器-结构分析器-仿真演示器于一体的三器一体化的筑工程辅助设计和软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

中，着重分析和开发了石材铺设的参数化分割和编号、石材的艺术拼花、石材加工信息在不同软件中的通信即加工单的开立、以及旋转楼梯扶手石材贴片空间曲线的等几个功能块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层方法和流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压的基本方程入手，对双三角钻臂变幅机构进行了机理。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学和切削理论对单点金刚石加工时的工件端面切削及“飞切”加工进行了仿真。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮参数模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对统一模语言UML、最新模工具软件UNIFACE和立库存管ABC析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航测、真实三维模和地信息系统开发业务于一综合地信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模方法,立了气动潜孔冲击器概念模型、装配模型和零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集筑模器-结构析器-仿真演示器于一三器一筑工程辅助设计和软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系统中，着重析和开发了石材铺设参数割和编号、石材艺术拼花、石材加工信息在不同软件中通信即加工单开立、以及旋转楼梯扶手石材贴片空间曲线模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据断层模方法和模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统基本方程入手，对双三角钻臂变幅机构进行了机模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学和切削论对单点金刚石加工时工件端面切削及“飞切”加工进行了仿真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对一模语言UML、最新模工具软件UNIFACE和立库存管理的ABC分析法进行了究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航测、真实三维模和地理信息系业务于一体的综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模的方法,立了气动潜孔冲击器的概念模型、装配模型和零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系中，提出并实现了集筑模器-结构分析器-仿真演示器于一体的三器一体化的筑工程辅助设计和软件思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系中，着重分析和了石材铺设的参数化分割和编号、石材的艺术拼花、石材加工信息在不同软件中的通信即加工单的立、以及旋转楼梯扶手石材贴片空间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层模方法和模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系的基本方程入手，对双三角钻臂变幅机构进行了机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学和切削理论对单点金刚石加工时的工件端面切削及“飞切”加工进行了仿真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对一模语言UML、最新模工具软件UNIFACE和立库存管理的ABC分析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航测、真实三维模和地理信息发业务于一体的综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模的方法,立了气动潜孔冲击器的概念模型、装配模型和零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在研，出并实现了集筑模器-结构分析器-仿真演示器于一体的三器一体化的筑工程辅助设计和软件发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该，着重分析和发了石材铺设的参数化分割和编号、石材的艺术拼花、石材加工信息在不同软件的通信即加工单的立、以及旋转楼梯扶手石材贴片空间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层模方法和模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压的基本方程入手，对双三角钻臂变幅机构进行了机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学和切削理论对单点金刚石加工时的工件端面切削及“飞切”加工进行了仿真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对统一模语言UML、最新模软件UNIFACE立库存管理的ABC分析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航测、真实三维模地理信息系统开发业务于一体的综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模的方法,立了气动潜孔冲击器的概念模型、装配模型零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集筑模器-结构分析器-仿真演示器于一体的三器一体化的筑程辅助设软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系统中，着重分析开发了石材铺设的参数化分割编号、石材的艺术拼花、石材加信息在不同软件中的通信即加单的开立、以及旋转楼梯扶手石材贴片空间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层模方法模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学切削理论对单点金刚石加时的件端面切削及“飞切”加进行了仿真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对统一语言UML、最新工具软件UNIFACE和立库存管理的ABC分析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航、三维和地理信息系统开发业务于一体的综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品的方法,立了气动潜孔冲击的概念型、装配型和零件型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并现了集筑-构分析-仿演示于一体的三一体化的筑工程辅助设计和软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系统中，着重分析和开发了石材铺设的参数化分割和编号、石材的艺术拼花、石材加工信息在不同软件中的通信即加工单的开立、以及旋转楼梯扶手石材贴片空间曲线的等几个功能块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观数据、钻孔数据、平面图数据、剖面图数据的断层方法和流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学和切削理论对单点金刚石加工时的工件端面切削及“飞切”加工进行了仿。