Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.

本文讨论了目前国内猪正存在的主要质量缺陷,以及鞣前准备中严重影响这些质量的关键工艺技术。

The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.

表观缺陷主要表现为釉泡氧化铁粒,且其集中于杯体下部外侧面。

The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.

微观缺陷主要包括微孔夹杂,其中微孔由微气孔微缩孔组成,夹杂物按形态分为团簇状夹杂、锥状夹杂、粒状夹杂、积聚物夹杂、丝状夹杂混合形夹杂。

Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.

本文讨论了目前国内猪正服装革存在的主要质量缺陷,以及鞣前准备严这些质量的关键工艺技术。

The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.

表观缺陷主要表现为釉泡和氧化铁粒,且集于杯体下部外侧面。

The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.

观缺陷主要包括孔和夹杂,孔由气孔和缩孔组成,夹杂物按形态和尺寸分为团簇状夹杂、锥状夹杂、粒状夹杂、积聚物夹杂、丝状夹杂和混合形夹杂。

Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.

本文讨论了目前国内猪革存在的主要质量缺陷,以及鞣前准备中严重影响这些质量的关键工艺技术。

The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.

表观缺陷主要表现为釉泡和氧化铁粒,且其集中于杯体下部外侧面。

The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.

微观缺陷主要包括微孔和夹杂,其中微孔由微气孔和微缩孔组成,夹杂物按形态和为团簇状夹杂、锥状夹杂、粒状夹杂、积聚物夹杂、丝状夹杂和混合形夹杂。

Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.

本了目前国内猪正服装革存在的主要质量缺陷,以及鞣前准备中严重影响这些质量的关键工艺技术。

The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.

表观缺陷主要表现为釉泡和氧化铁粒,且其集中于杯体下部外侧面。

The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.

微观缺陷主要包括微孔和杂,其中微孔由微气孔和微缩孔组成,杂物按形态和尺寸分为团簇杂、杂、粒杂、积聚物杂、丝杂和混合形杂。

Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.

本文讨论国内猪正服装革存在的主要质量缺陷,以及鞣准备中严重影响这些质量的关键工艺技术。

The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.

表观缺陷主要表现为釉泡和氧化铁粒,且其集中于杯体下部外侧面。

The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.

微观缺陷主要包括微孔和,其中微孔由微气孔和微缩孔组成,物按形态和尺寸分为团簇、锥、粒、积聚物、丝和混合形。

Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.

本文讨论了目猪正服装革存在的主要质量缺陷,以及鞣准备中严重影响这些质量的关键工艺技术。

The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.

表观缺陷主要表现为釉泡和氧化铁粒,且其集中于杯体下部外侧面。

The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.

微观缺陷主要包括微孔和夹杂,其中微孔由微气孔和微缩孔组成,夹杂物按形态和尺寸分为夹杂、锥夹杂、粒夹杂、积聚物夹杂、丝夹杂和混合形夹杂。

Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.

本文讨论国内猪正服装革存在的主要质量缺陷,以及鞣准备中严重影响这些质量的关键工艺技术。

The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.

表观缺陷主要表现为釉泡和氧化铁粒,且其集中于杯体下部外侧面。

The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.

微观缺陷主要包括微孔和,其中微孔由微气孔和微缩孔组成,物按形态和尺寸分为团簇、锥、粒、积聚物、丝和混合形。

Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.

文讨论了目前国内猪正服装革存在的主要质量缺陷,以及鞣前准备中严重影响这些质量的关键工艺技术。

The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.

表观缺陷主要表现为釉泡和氧化铁,且其集中于杯体下部外侧面。

The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.

微观缺陷主要包括微孔和夹,其中微孔由微气孔和微缩孔组成,夹物按形态和尺寸分为团簇夹、锥夹、夹、积聚物夹、丝夹和混合形夹。

Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.

本文讨论国内猪正服装革存在的主要质量缺陷,以及鞣准备中严重影响这些质量的关键工艺技术。

The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.

表观缺陷主要表现为釉泡和氧化铁粒,且其集中于杯体下部外侧面。

The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.

微观缺陷主要包括微孔和,其中微孔由微气孔和微缩孔组成,物按形态和尺寸分为团簇、锥、粒、积聚物、丝和混合形。

Main defects and key technology in beamhouse effeeting.quality of pigskin garment leather producing were discussed in this paper.

本文讨论了目前国内猪正服装革存在的主要质量缺陷,以及鞣前准备中严重影响这些质量的关键工艺技术。

The surface defect appeared mainly as air bubbles and ferroferric oxide drops which centred around the lower outer - field portion of the stoneware cup.

表观缺陷主要表现为釉泡和氧化铁粒,且其集中于杯体下部外侧面。

The pattern of fracture by impact penetration test and tensile fatigue test of thermite welding with stereoscan was observed,and the component of defect with energy spectrum was analyed.

微观缺陷主要包括微孔和,其中微孔由微气孔和微缩孔组成,物按形态和尺寸分为团簇、锥、粒、积聚物、丝和混合形。