Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采丁腈、羧丁腈、丁苯、丁吡四种胶乳改性。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了性炭的制备方法、性能及其应进展和主要研究方向。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型是铸造聚氨酯粘合剂的主要成份之一,它的结构及合成工艺条件决定了该类粘合剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯与甲在碱性条件下经加成、缩合制得可发性，该和表面性剂、发泡剂、固化剂一起发泡即得泡沫塑料。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采腈、羧基腈、、吡四种胶乳改性酚醛树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚醛树脂基活性炭制备方法、性能及其应进展和主要研究方向。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

醚型酚醛树脂是铸造聚氨酯粘合剂主要成份之,结构及合成工艺条件决定了该类粘合剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

酚与甲醛在碱性条件下经加成、缩合制得可发性酚醛树脂，该树脂和表面活性剂、发泡剂、固化剂起发泡即得酚醛泡沫塑料。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采丁腈、羧基丁腈、丁苯、丁吡四种胶酚醛树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚醛树脂基活炭制备方法、能及其应进展和要研究方向。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造聚氨酯粘合要成份之一,它结构及合成工艺条件决定了该类粘合能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲醛在碱条件下经加成、缩合制得可发酚醛树脂，该树脂和表面活、发泡、固化一起发泡即得酚醛泡沫塑料。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采丁腈、羧基丁腈、丁苯、丁吡四种胶乳改性酚树。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚树基活性炭的制备方法、性能及其应进展和主要研究方向。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚树是铸造聚氨酯粘合剂的主要成份之一,它的结构及合成工艺条件决定了该类粘合剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚在碱性条件下经加成、缩合制得可发性酚树，该树和表面活性剂、发泡剂、固化剂一起发泡即得酚泡沫塑料。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采丁腈、羧基丁腈、丁苯、丁吡四种胶乳改性酚醛树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述酚醛树脂基活性炭的制备方法、性能及其应进展和主要研究方向。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造聚氨酯粘合剂的主要成份之一,它的结构及合成工艺条件决定粘合剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲醛在碱性条件下经加成、缩合制得可发性酚醛树脂，树脂和表面活性剂、发泡剂、固化剂一起发泡即得酚醛泡沫塑料。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采丁腈、羧基丁腈、丁苯、丁吡四种胶乳改醛树。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了醛树基活炭的制备方法、能及其应进展和主要研究方向。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型醛树是铸造聚氨酯粘合剂的主要成份之一,它的结构及合成工艺件决定了该类粘合剂能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯与甲醛在件下经加成、缩合制得可发醛树，该树和表面活剂、发泡剂、固化剂一起发泡即得醛泡沫塑料。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采丁腈、羧基丁腈、丁苯、丁吡四种胶乳改酚醛树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚醛树脂基活炭的制备方法、能及其应进展和主要研究方向。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造聚氨酯粘的主要成份之一,它的结构及成工艺条件决定了该类粘能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲醛在碱条件下经加成、缩制得可发酚醛树脂，该树脂和表面活、发泡、固化一起发泡即得酚醛泡沫塑料。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

腈、羧基腈、苯、吡四种胶乳改性酚醛树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚醛树脂基活性炭的制备方法、性能及其应进展和主要研究方向。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造聚氨酯粘合剂的主要成份之一,它的结构及合成件决定了该类粘合剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲醛在碱性件下经加成、缩合制得可发性酚醛树脂，该树脂和表面活性剂、发泡剂、固化剂一起发泡即得酚醛泡沫塑料。

Phenolic resin was modified respectively using four latexes of butyronitrile-butadiene,carboxylic butyronitrile-butadiene,styrene-butadiene and pyridine-butadiene.

采丁腈、羧基丁腈、丁苯、丁吡四种胶乳改性酚醛树脂。

This paper summarizes the preparation method, performance, progress of application and direction of studying phenolic resin acticarbon.

概述了酚醛树脂基活性炭的制备方法、性能及其应进展和主要研究方向。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造聚氨酯粘合剂的主要成份之一,它的结构及合成工艺条件决定了该类粘合剂性能。

A foamable phenolic resin was prepared,through addition,condensation,in the presence of alkali.The resin was foamed with surfactant, foamer,solidifying agent , then the foam phenolplast was given .

苯酚与甲醛在碱性条件下经加成、缩合制性酚醛树脂，该树脂和表面活性剂、泡剂、固化剂一起泡即酚醛泡沫塑料。