The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化等温热处理的原理和设备。

Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.

应用“淬火法”研究了等温过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相析出和长大的动力学规律。

Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .

结论 乳化剂表（界）面张力等温法用于评价乳化剂的乳化能力是可行的。

And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.

通过对一些基本的热力学过程的量子力学推广，我们可以直接从量子力学去理解热力学。

Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.

补偿的快速校准大量的热电偶，路口的提法，可在温多端地带。

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等温涡轮燃烧技术,提出了一种改进的概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了。

Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.

边界层理论，等温、等热流垂直板，等热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。

The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.

非恒温非绝热固定床反应器广泛应用于强放热的反应体系。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指钢丝铅浴索氏体化处理存在的问题,介绍无铅索氏体化等处理的原理设备。

Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.

应用“淬火法”研究了等过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相长大的动力学规律。

Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .

结论 乳化剂表（界）面张力等线比较法用于评价乳化剂的乳化能力是可行的。

And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.

通过对一些基本的力学过程的量子力学推广，我们可以直接从量子力学去理解力学。

Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.

补偿的快速校准大量的电偶，路口的提法，可在多端带。

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等涡轮燃烧技术,提了一种改进的概括性卡诺循环燃气轮机,通过模型预测分了其性能,并与传统燃气轮机进行了比较。

Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.

边界层理论，等、等流垂直板，等流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。

The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.

非恒非绝固定床反应器广泛应用于强放的反应体系。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝浴体化热处理存在的问题,介绍无体化等热处理的原理和设备。

Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.

应用“淬火法”研究了等过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相析出和长大的动力学规律。

Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .

结论 乳化剂表（界）面张力等线比较法用于评价乳化剂的乳化能力是可行的。

And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.

通过对一些基本的热力学过程的量子力学推广，我们可以直接从量子力学去理解热力学。

Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.

补偿的快速校准大量的热电偶，路口的提法，可在多端地带。

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等涡轮燃烧技术,提出了一种改进的概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了比较。

Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.

边界层理论，等、等热流垂直板，等热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。

The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.

非恒非绝热固定床反应器广泛应用于强放热的反应体系。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化温热处理的原理和设备。

Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.

应用“淬法”研究了温过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相析和长大的动力学规律。

Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .

结论 乳化剂表（界）面张力温线比较法用于评价乳化剂的乳化能力是可行的。

And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.

通过对一些基本的热力学过程的量子力学推广，我们可以直接从量子力学去理解热力学。

Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.

补偿的快速校准大量的热电偶，路口的提法，可在温多端地带。

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及温涡轮燃烧技术,提了一种改进的概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了比较。

Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.

边界层理论，温、热流垂直板，热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。

The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.

非恒温非绝热固定床反应器广泛应用于强放热的反应体系。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体热处理存在的问题,介绍无铅索氏体热处理的原理和设备。

Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.

应用“淬火法”研究了过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相析出和长大的动力学规律。

Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .

结论 表（界）面张力比较法用于评价的能力是可行的。

And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.

通过对一些基本的热力学过程的量子力学推广，我们可以直接从量子力学去理解热力学。

Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.

补偿的快速校准大量的热电偶，路口的提法，可在多端地带。

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及涡轮燃烧技术,提出了一种改进的概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了比较。

Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.

边界层理论，、热流垂直板，热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。

The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.

非恒非绝热固定床反应器广泛应用于强放热的反应体系。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化等温热处理的原理和设备。

Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.

应“淬火法”研究了等温过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相析出和长大的动力学规律。

Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .

结论 乳化剂表（界）面张力等温线比较法评价乳化剂的乳化能力是可行的。

And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.

通过对一些基本的热力学过程的量子力学推广，我们可以直接从量子力学去理解热力学。

Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.

补偿的快速校准大量的热电偶，路口的提法，可在温多端地带。

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基气体多变压缩以及等温涡轮燃烧技术,提出了一种改进的概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了比较。

Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.

边界层理论，等温、等热流垂直板，等热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。

The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.

非恒温非绝热固定床应器广泛应强放热的应体系。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化存在的问题,介绍无铅索氏体化温的原和设备。

Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.

应用“淬火法”研究了温过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相析出和长大的动力学规律。

Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .

结论 乳化剂表（界）面张力温线比较法用于评价乳化剂的乳化能力是可行的。

And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.

通过对一些基本的力学过程的量子力学推广，我们可以直接从量子力学去解力学。

Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.

补偿的快速校准大量的电偶，路口的提法，可在温多端地带。

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变以及温涡轮燃烧技术,提出了一种改进的概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了比较。

Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.

边界层论，温、流垂直板，流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。

The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.

非恒温非绝固定床反应器广泛应用于强放的反应体系。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化等温热处理的原理和设备。

Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.

应用“淬火法”研究了等温过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相析出和长大的动力学规律。

Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .

结论 乳化剂（）张力等温线比较法用于评价乳化剂的乳化能力是可行的。

And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.

通过对一些基本的热力学过程的量子力学推广，我们可以直接从量子力学去理解热力学。

Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.

补偿的快速校准大量的热电偶，路口的提法，可在温多端地带。

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等温涡轮燃烧技术,提出了一种改进的概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了比较。

Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.

边层理论，等温、等热流垂直板，等热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。

The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.

非恒温非绝热固定床反应器广泛应用于强放热的反应体系。

The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.

指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化等温热处理的原理和设备。

Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.

应用“淬火法”研究了等温过程含稀土高炉渣中铈钙硅石相的结,并讨论了该相析出和长大的规律。

Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .

结论 乳化剂表（界）面张等温线比较法用于评价乳化剂的乳化能是可的。

And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.

通过对一些基本的热过程的量子推广，我们可以直接从量子去理解热。

Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.

补偿的快速校准大量的热电偶，路口的提法，可在温多端地带。

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等温涡轮燃烧技术,提出了一种改进的概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进了比较。

Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.

边界层理论，等温、等热流垂直板，等热流非对称之垂直两平板自由对流以及最佳及最大气渠板距将被讨论。

The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.

非恒温非绝热固定床反应器广泛应用于强放热的反应体系。