Reattach the relief valve hose to the elbow in the bottom flange cover.

重新将安全阀软管接到底部法兰盖内的弯头上。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内纹嵌件，造成侧凹脱和嵌件置入困难。

Second process: After operated by the front forward gas baffler, the paper reciprocates to the drum of the second layer to perform flanging of the backside.

纸张经后推气挡板之作，再往复至第二层滚筒完成前边折边。

Now our company is majoring in nuts series: rivet nuts, blind rivet, insert nuts,nylon locknuts, welded nuts, flange nuts and other kinds of auto standard parts.

上海锐拓五金现在主营固件系列中的母类产品： 铆母，尼龙母，焊接母，法兰母，以及各类汽车标准件。

Customers can use this bender together with plain locking seam former,round airduct locking seam formers and L-steel round flange bender to complete to complete round airducts thoroughly.

与本公司单平口咬口机和园风管咬口机、角钢卷园机配套使，可完成圆形风管的全部制作加工。

Third process: After operated by the back forward gas baffler, the paper reciprocates to the drum of the third layer to perform flanging of the front side.

纸张经前推气挡板之作，再往复至第二层滚筒完成后边折边。

Reattach the relief valve hose to the elbow in the bottom flange cover.

重新将安全阀软管接到底部法兰盖内的弯头上。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内纹嵌件，造成侧凹脱和嵌件置入困难。

Second process: After operated by the front forward gas baffler, the paper reciprocates to the drum of the second layer to perform flanging of the backside.

纸张经后推气挡板之作用，再往复至第二层滚筒完成前折。

Now our company is majoring in nuts series: rivet nuts, blind rivet, insert nuts,nylon locknuts, welded nuts, flange nuts and other kinds of auto standard parts.

上海锐拓五金现在主营紧固件系列中的类产品： ，尼龙锁紧，焊接，法兰，以及各类汽车标准件。

Customers can use this bender together with plain locking seam former,round airduct locking seam formers and L-steel round flange bender to complete to complete round airducts thoroughly.

与本公司单平口咬口机和园风管咬口机、角钢卷园机配套使用，可完成圆形风管的全部制作加工。

Third process: After operated by the back forward gas baffler, the paper reciprocates to the drum of the third layer to perform flanging of the front side.

纸张经前推气挡板之作用，再往复至第二层滚筒完成后折。

Reattach the relief valve hose to the elbow in the bottom flange cover.

重新将安全阀软管接到底部法盖内的弯头上。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内纹嵌件，造侧凹脱和嵌件置入困难。

Second process: After operated by the front forward gas baffler, the paper reciprocates to the drum of the second layer to perform flanging of the backside.

纸张经后推气挡板之作用，再往复至第二层滚筒完前边折边。

Now our company is majoring in nuts series: rivet nuts, blind rivet, insert nuts,nylon locknuts, welded nuts, flange nuts and other kinds of auto standard parts.

上海锐拓五金现在主营紧固件系列中的母类产品： 铆母，尼龙锁紧母，焊接母，法母，以及各类汽车标准件。

Customers can use this bender together with plain locking seam former,round airduct locking seam formers and L-steel round flange bender to complete to complete round airducts thoroughly.

与本公司单平咬机和园风管咬机、角钢卷园机配套使用，可完圆形风管的全部作加工。

Third process: After operated by the back forward gas baffler, the paper reciprocates to the drum of the third layer to perform flanging of the front side.

纸张经前推气挡板之作用，再往复至第二层滚筒完后边折边。

Reattach the relief valve hose to the elbow in the bottom flange cover.

重新将安全阀软管到底部法盖内的弯头上。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内纹嵌件，造成侧凹脱和嵌件置入困难。

Second process: After operated by the front forward gas baffler, the paper reciprocates to the drum of the second layer to perform flanging of the backside.

纸张经后推气挡板之作用，再往复至第二层滚筒完成前边折边。

Now our company is majoring in nuts series: rivet nuts, blind rivet, insert nuts,nylon locknuts, welded nuts, flange nuts and other kinds of auto standard parts.

上海锐拓五金现在主营紧固件系列中的母类产品： 铆母，尼龙锁紧母，母，法母，以及各类汽车标准件。

Customers can use this bender together with plain locking seam former,round airduct locking seam formers and L-steel round flange bender to complete to complete round airducts thoroughly.

与本公司单平口咬口机和园风管咬口机、角钢卷园机配套使用，可完成圆形风管的全部制作加工。

Third process: After operated by the back forward gas baffler, the paper reciprocates to the drum of the third layer to perform flanging of the front side.

纸张经前推气挡板之作用，再往复至第二层滚筒完成后边折边。

Reattach the relief valve hose to the elbow in the bottom flange cover.

重新将安全阀软管接到底部法兰盖内的弯头上。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内螺纹嵌件，造成侧凹脱和嵌件置入困难。

Second process: After operated by the front forward gas baffler, the paper reciprocates to the drum of the second layer to perform flanging of the backside.

纸张经后推气挡板之作，再往复至第二层滚筒完成前边折边。

Now our company is majoring in nuts series: rivet nuts, blind rivet, insert nuts,nylon locknuts, welded nuts, flange nuts and other kinds of auto standard parts.

上海锐拓五金现在主营固件系列中的螺母类产品： 铆螺母，尼螺母，焊接螺母，法兰螺母，以及各类汽车标准件。

Customers can use this bender together with plain locking seam former,round airduct locking seam formers and L-steel round flange bender to complete to complete round airducts thoroughly.

与本公司单平口咬口机和园风管咬口机、角钢卷园机配套使，可完成圆形风管的全部制作加工。

Third process: After operated by the back forward gas baffler, the paper reciprocates to the drum of the third layer to perform flanging of the front side.

纸张经前推气挡板之作，再往复至第二层滚筒完成后边折边。

Reattach the relief valve hose to the elbow in the bottom flange cover.

重新将安全阀软管接到底部法兰盖内弯头上。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内纹嵌件，造成侧凹脱和嵌件置入困难。

Second process: After operated by the front forward gas baffler, the paper reciprocates to the drum of the second layer to perform flanging of the backside.

纸张经后推气挡板之作用，再往复至第二层滚筒完成前。

Now our company is majoring in nuts series: rivet nuts, blind rivet, insert nuts,nylon locknuts, welded nuts, flange nuts and other kinds of auto standard parts.

上海锐拓五金现在主营紧固件系列母类产品： 铆母，尼龙锁紧母，焊接母，法兰母，以及各类汽车标准件。

Customers can use this bender together with plain locking seam former,round airduct locking seam formers and L-steel round flange bender to complete to complete round airducts thoroughly.

与本公司单平口咬口和园风管咬口、角钢卷园配套使用，可完成圆形风管全部制作加工。

Third process: After operated by the back forward gas baffler, the paper reciprocates to the drum of the third layer to perform flanging of the front side.

纸张经前推气挡板之作用，再往复至第二层滚筒完成后。

Reattach the relief valve hose to the elbow in the bottom flange cover.

重新将安全阀软管接到底部法兰盖内的弯头上。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内嵌内螺纹嵌件，造成侧凹脱和嵌件置入困难。

Second process: After operated by the front forward gas baffler, the paper reciprocates to the drum of the second layer to perform flanging of the backside.

纸张经后推气挡板之作，再往复至第二层滚筒完成前边折边。

Now our company is majoring in nuts series: rivet nuts, blind rivet, insert nuts,nylon locknuts, welded nuts, flange nuts and other kinds of auto standard parts.

上海锐拓五金现在主营固件系列中的螺母类产品： 铆螺母，尼螺母，焊接螺母，法兰螺母，以及各类汽车标准件。

Customers can use this bender together with plain locking seam former,round airduct locking seam formers and L-steel round flange bender to complete to complete round airducts thoroughly.

与本公司单平口咬口机和园风管咬口机、角钢卷园机配套使，可完成圆形风管的全部制作加工。

Third process: After operated by the back forward gas baffler, the paper reciprocates to the drum of the third layer to perform flanging of the front side.

纸张经前推气挡板之作，再往复至第二层滚筒完成后边折边。

Reattach the relief valve hose to the elbow in the bottom flange cover.

重新将安全阀软管接到底部法兰盖的弯头上。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且纹件，造成侧凹脱和件置入困难。

Second process: After operated by the front forward gas baffler, the paper reciprocates to the drum of the second layer to perform flanging of the backside.

纸推气挡板之作用，再往复至第二层滚筒完成前边折边。

Now our company is majoring in nuts series: rivet nuts, blind rivet, insert nuts,nylon locknuts, welded nuts, flange nuts and other kinds of auto standard parts.

上海锐拓五金现在主营紧固件系列中的母类产品： 铆母，尼龙锁紧母，焊接母，法兰母，以及各类汽车标准件。

Customers can use this bender together with plain locking seam former,round airduct locking seam formers and L-steel round flange bender to complete to complete round airducts thoroughly.

与本公司单平口咬口机和园风管咬口机、角钢卷园机配套使用，可完成圆形风管的全部制作加工。

Third process: After operated by the back forward gas baffler, the paper reciprocates to the drum of the third layer to perform flanging of the front side.

纸前推气挡板之作用，再往复至第二层滚筒完成边折边。

Reattach the relief valve hose to the elbow in the bottom flange cover.

重新将安全阀软管接到底部法兰盖内的弯头上。

A compression moulded part, which has nut inserts and flanges at both ends, is difficult to demould and set in the inserts.

塑件外侧两端各有突缘，且内内螺纹件，造成侧件置入困难。

Second process: After operated by the front forward gas baffler, the paper reciprocates to the drum of the second layer to perform flanging of the backside.

纸张经后推气挡板之作用，再往复至第二层滚筒完成前边折边。

Now our company is majoring in nuts series: rivet nuts, blind rivet, insert nuts,nylon locknuts, welded nuts, flange nuts and other kinds of auto standard parts.

上海锐拓五金现在主营紧固件系列中的螺母类产品： 铆螺母，尼龙锁紧螺母，焊接螺母，法兰螺母，以及各类汽车标准件。

Customers can use this bender together with plain locking seam former,round airduct locking seam formers and L-steel round flange bender to complete to complete round airducts thoroughly.

与本公司单平口咬口机园风管咬口机、角钢卷园机配套使用，可完成圆形风管的全部制作加工。

Third process: After operated by the back forward gas baffler, the paper reciprocates to the drum of the third layer to perform flanging of the front side.

纸张经前推气挡板之作用，再往复至第二层滚筒完成后边折边。