I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮廓深刻颊。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴等值线图和等深线分析得出了操作参数最佳范围。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了提高非球曲超精密加工轮廓跟踪精度误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转或稳定波节区而轮廓线则描绘出等振幅区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后部外形都取得了令人满意恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加工过程数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强湿处理能力，并且以很容易地用剪刀或小刀切割，它还以以复杂外形直接应用在械装置上，或者用来制造平片或平板产品。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮廓深刻的颊。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过值线图和深线分析得出了操作参数的最佳范围。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲超精密加工机床的轮廓跟踪精度的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转的的波节区而轮廓线则描绘出振幅的区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后部外形都取得了令人满意的恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加工过程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强的湿处理能力，并且可以很容易地用剪刀小刀切割，它还可以以复杂的外形直接应用在机械装置上，者用来制造平片平板产品。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮廓深刻的颊。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴图和深分析得出了操作参数的最佳范围。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲超精密加工机床的轮廓跟踪精度的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转的或稳定的波节区而轮廓则描绘出振幅的区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后部外形都取得了令人满意的恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加工过程的数学模拟，利用原凸轮外形来直接设计凸轮仿形车床的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强的湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂的外形直接应用在机械装置上，或者用来制造平片或平板。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮廓深刻的颊。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴值和深分析得出了操作参数的最佳范围。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲超精密加工机床的轮廓跟踪精度的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转的或稳定的波节区而轮廓则描绘出振幅的区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后部外形都取得了令人满意的恢复效，源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加工过程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强的湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂的外形直接应用在机械装置上，或者用来制造平片或平板产品。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮廓深刻的颊。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴等值线图和等深线分析得出了操作参数的最佳范围。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非密加工机床的轮廓跟踪度的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转的或稳定的波节区而轮廓线则描绘出等振幅的区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后部外形都取得了令人满意的恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加工过程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强的湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂的外形直接应用在机械装置上，或者用来制造平片或平板产品。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮廓深刻的颊。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴等值线图和等深线分析得出了操作参数的最。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲超密加工机床的轮廓跟的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转的或稳定的波节区而轮廓线则描绘出等振幅的区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后部外形都取得了令人满意的恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加工过程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强的湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂的外形直接应用在机械装置上，或者用来制造平片或平板产品。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮廓深刻。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴等值线图和等深线分析得出了操作参数最佳范围。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲超精密加工机床轮廓跟踪精度误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮表示未受偏转或稳定波轮廓线则描绘出等振幅域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后部外形都取得了令人满意恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加工过程数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂外形直接应用在机械装置上，或者用来制造平片或平板产品。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮廓深刻的颊。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通三轴等值线图和等深线分析得出了操作参数的最佳范围。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲超精密加机床的轮廓跟踪精度的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转的或稳定的波节区而轮廓线则描绘出等振幅的区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后部外形都取得了令人满意的恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通对凸轮加的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强的湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂的外形直接应用在机械装置上，或者用来制造平片或平板产品。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮廓刻的颊。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴值线图和线分析得出操作参数的最佳范围。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍一种可提高非球曲超精密加工机床的轮廓跟踪精度的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转的或稳定的波节区而轮廓线则描绘出振幅的区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后部外形都取得满意的恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加工过程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强的湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂的外形直接应用在机械装置上，或者用来制造平片或平板产品。