The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴值图和深分析得出了操参数最佳范围。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、廓深刻面颊。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提非球曲面超精密加工机廓跟踪精度误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转或稳定波节区而廓则描绘出振幅区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后面部外形都取得了令人满意恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸加工过程数学模拟，利用原始产品凸外形来直接设计凸仿形车靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂外形直接应用在机械装置上，或者用来制造平片或平板产品。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴等值线图和等深线分析得出了操参数最佳范围。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、深刻面颊。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲面超精密加工机床跟踪精度误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转或稳定波节区而线则描绘出等振幅区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后面部外形都取得了令人满复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸加工过程数学模拟，利用原始产品凸外形来直接设计凸仿形车床靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂外形直接应用在机械装置上，或者用来制造平片或平板产品。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三线图深线分析得出了操参数的最佳范围。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩、轮廓深刻的面颊。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲面超精密加工机床的轮廓跟踪精度的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转的或稳定的波节区而轮廓线则描绘出振幅的区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后面部外形都取得了令人满意的恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加工过程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强的湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂的外形直接应用在机械装置上，或者用来制造平片或平板产品。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴等值图和等深分析得出了操参数的最佳范围。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮廓深刻的面颊。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲面超精密加工机床的轮廓跟踪精度的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区受偏转的或稳定的波节区而轮廓则描绘出等振幅的区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后面部外形都取得了令人满意的恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加工过程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显出较强的湿处理能力，并且可以很容易用剪刀或小刀切割，它还可以以复杂的外形直接应用在机械装置上，或者用来制造平片或平板产品。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

过三轴等值线图和等深线分析得出了操参数的最佳范围。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、廓深刻的面颊。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲面超精密加工机床的廓跟踪精度的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转的或稳定的波节区而廓线则描绘出等振幅的区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后面部外形都取得了令人满意的恢复效果，无医源性复视症状。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

过对凸加工过程的数学模拟，利用原始产品凸外形来直接设计凸仿形车床的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强的湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂的外形直接应用在机械装置上，或者用来制造平片或平板产品。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴等值图和等深分析出操参数的最佳范围。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮廓深刻的面颊。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍一种可提高非球曲面超精密加工机床的轮廓跟踪精度的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转的或稳定的波节区而轮廓则描绘出等振幅的区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后面部外形都取人满意的恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加工过程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强的湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂的外形直接应用在机械装置上，或者用来制造平片或平板产品。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴等值和等深分析得出了操参数的最佳范围。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮廓深刻的面颊。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提非球曲面超精密加的轮廓跟踪精度的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转的或稳定的波节区而轮廓则描绘出等振幅的区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后面部外形都取得了令人满意的恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加过程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强的湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂的外形直接应用在械装置上，或者用来制造平片或平板产品。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴值图和深分析得出了操参数的最佳范围。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮深刻的面颊。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲面超密加工机床的轮度的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转的或稳定的波节区而轮则描绘出振幅的区域。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

术后面部外形都取得了令人满意的恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加工过程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强的湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂的外形直接应用在机械装置上，或者用来制造平片或平板产品。

The optimum range of operational parameters were resulted by triaxial contour map and isohypse analysis.

通过三轴等值线图和等深线分析得出了操参数的最佳范围。

I ran my finger along the soft, curving contour of the child's cheek.

我抚摸着孩子柔和、轮廓深刻的面颊。

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

介绍了一种可提高非球曲面超精密加工机床的轮廓跟踪精度的误差补偿控制方法。

Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

亮区表示未受偏转的或稳定的波节区而轮廓线则描绘出等振幅的区。

After operation we gained the satisfactory effect in the patients’ prosopo contour, moreover, the patients had no iatrogenic ambiopia symptom.

面部外形都取得了令人满意的恢复效果，无医源性复视症状发生。

In this paper,the cam explorator in contour lathe is designed direct according to the contour of primary products with the mathematical analogue of the working course of the cam。

通过对凸轮加工过程的数学模拟，利用原始产品凸轮外形来直接设计凸轮仿形车床的靠模。

It exhibits good wet handleability, is easily cut with scissors or a knife, can be applied directly to equipment with complex contours, and can also be used to fabricate flat sheets or boards.

它显示出较强的湿处理能力，并且可以很容易地用剪刀或小刀切割，它还可以以复杂的外形直接应用在机械装置上，或者用来制造平片或平板产品。