Soot is the product of the imperfect combustion of fuel.

煤烟是料不完。

These results are instructively important for determining combustion heat safely.

这些结果对安地测定热具有指导意义。

Soot is usually the product of the imperfect combustion of fuel.

煤烟通常是料不完。

Usually a gas cooler is used between the combustion chamber and hydrator.

通常在室和水合器之间设置一个气体冷却器。

A model of pyrotechnical combustion products was established based on the principle of minimum free-energy.

预测对烟火药设计非常重要。

The paper discusses the calculation and its property of the rate of combustion heatrelease for prechamber diesel engines.

文章讨论了予室柴油发热规律计算特点和方法。

Reference on step conversion of coal gasification and carbocoal combustion is offered by the research on pyrolysis carbocoal.

热解半焦研究为煤气化及半焦分级转化技术提供了参考。

Sugariness is in digestive process, if the word because of without complete combustion corruption, will become lactic acid.

糖质在消化过程中，如果因为没有完而腐败话，将会变成乳酸。

All the results can be used to validate the autoignition and combustion models of homogeneous mixture in vitiated coflow.

为活化热氛围下液体料自及模型建立奠定了基础。

The technigue of staged coal combustion in underplate burning boiler is a mew method for energy saving and environment protecting.

层炉两段技术,是一种行之有效节能、环保新技术。

Besides, laser optoacoustic spectroscopy technique and laser mass spectrometry will play more important role in research of internal combustion engine.

另外，激光光声光谱技术、激光质谱仪等有望在内研究中发挥更大作用。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,分析了补室长度对掺混流场和二次效率影响。

Preliminary test of combusting property of COWS showed that this kind of synfuel had a good combustion behavior, and high combustion efficiency.

性实验表明，三元料浆性能良好，效率高，是一种工业应用前景广阔浆体。

The heat input of gasification using coalite as solid heat carrier comes from combustion heat of the solid heat carrier in riser.

固体热载体煤气化热量靠提升生。

Three technology options including precombusfion capture,oxyen-fired combustion and postcombustion capture and their process flows for capturing CO2 are introduced in this paper.

文章主要介绍了3种CO2捕获技术:前捕获、纯氧、后捕获,并介绍了其工艺流程。

Multiphase flow is a new and developing discipline on the basis of hydrodynamics, heat and mass transfer, physiochemistry, combustion theory and other disciplines.

多相流是在流体力学传热传质学,生化学,学等多学科基础上发展起来一门新兴学科.

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等温涡轮技术,提出了一种改进概括性卡诺循环气轮,通过模型预测分析了其性能,并与传统气轮进行了比较。

The tribophysics of the cylinder liner—piston rings in an internal combustion engine is a typical tribological system with the reciprocating motion and the impacting motion.

内缸套——活塞环摩擦副系统是一个集往复、冲击于一体典型摩擦学系统。

Both numerical prediction and experiments signified that the new type flameholder has a bright prospect as a kind of high combustion efficiency and low pressure loss flameholder.

无论计算还是实验，都表明新型稳定器作为高效 低阻火焰稳定器是很有发展前景。

This paper discusses the fundamentals and characteristics of catalytic combustion and the type of catalyst and approaches the way to apply the technology of catalytic combustion in cremator.

本文对催化法基本原理、特点及催化剂形式等方面进行了讨论,并就催化技术在火化设备中实现可能方法进行了探讨。

Soot is the product of the imperfect combustion of fuel.

煤烟是料不完的产物。

These results are instructively important for determining combustion heat safely.

这对安地测定热具有指导意义。

Soot is usually the product of the imperfect combustion of fuel.

煤烟通常是料不完的产物。

Usually a gas cooler is used between the combustion chamber and hydrator.

通常在室和水合器之间设置一个气体冷却器。

A model of pyrotechnical combustion products was established based on the principle of minimum free-energy.

产物的预测对烟火药的设计非常重要。

The paper discusses the calculation and its property of the rate of combustion heatrelease for prechamber diesel engines.

文章讨论了予室柴油机的发热规律的计算特点和方法。

Reference on step conversion of coal gasification and carbocoal combustion is offered by the research on pyrolysis carbocoal.

热解半焦的研究为煤气化及半焦的分级转化技术提供了参考。

Sugariness is in digestive process, if the word because of without complete combustion corruption, will become lactic acid.

糖质在消化的过程中，如因为没有完而腐败的话，将会变成乳酸。

All the results can be used to validate the autoignition and combustion models of homogeneous mixture in vitiated coflow.

为活化热氛围下液体料自及模型的建立奠定了基础。

The technigue of staged coal combustion in underplate burning boiler is a mew method for energy saving and environment protecting.

层炉两段技术,是一种行之有效的节能、环保的新技术。

Besides, laser optoacoustic spectroscopy technique and laser mass spectrometry will play more important role in research of internal combustion engine.

另外，激光光声光谱技术、激光质谱仪等有望在内机的研究中发挥更大的作用。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

合直连式地面模拟试验,分析了补室长度对掺混流场和二次效率的影响。

Preliminary test of combusting property of COWS showed that this kind of synfuel had a good combustion behavior, and high combustion efficiency.

性实验表明，三元料浆的性能良好，效率高，是一种工业应用前景广阔的浆体。

The heat input of gasification using coalite as solid heat carrier comes from combustion heat of the solid heat carrier in riser.

固体热载体煤气化的热量靠提升产生。

Three technology options including precombusfion capture,oxyen-fired combustion and postcombustion capture and their process flows for capturing CO2 are introduced in this paper.

文章主要介绍了3种CO2捕获技术:前捕获、纯氧、后捕获,并介绍了其工艺流程。

Multiphase flow is a new and developing discipline on the basis of hydrodynamics, heat and mass transfer, physiochemistry, combustion theory and other disciplines.

多相流是在流体力学传热传质学,生物化学,学等多学科的基础上发展起来的一门新兴学科.

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等温涡轮技术,提出了一种改进的概括性卡诺循环气轮机,通过模型预测分析了其性能,并与传统气轮机进行了比较。

The tribophysics of the cylinder liner—piston rings in an internal combustion engine is a typical tribological system with the reciprocating motion and the impacting motion.

内机缸套——活塞环摩擦副系统是一个集往复、冲击于一体的典型的摩擦学系统。

Both numerical prediction and experiments signified that the new type flameholder has a bright prospect as a kind of high combustion efficiency and low pressure loss flameholder.

无论计算还是实验，都表明新型稳定器作为高效 低阻火焰稳定器是很有发展前景的。

This paper discusses the fundamentals and characteristics of catalytic combustion and the type of catalyst and approaches the way to apply the technology of catalytic combustion in cremator.

本文对催化法的基本原理、特点及催化剂的形式等方面进行了讨论,并就催化技术在火化设备中实现的可能方法进行了探讨。

Soot is the product of the imperfect combustion of fuel.

煤烟是料不完烧的产物。

These results are instructively important for determining combustion heat safely.

这些结果对安地测定烧热具有指导意义。

Soot is usually the product of the imperfect combustion of fuel.

煤烟通是料不完烧的产物。

Usually a gas cooler is used between the combustion chamber and hydrator.

通在烧室和水合器之间设置一个气体冷却器。

A model of pyrotechnical combustion products was established based on the principle of minimum free-energy.

烧产物的预测对烟火药的设计非。

The paper discusses the calculation and its property of the rate of combustion heatrelease for prechamber diesel engines.

文章讨论了予室柴油机的烧发热规律的计算特点和方法。

Reference on step conversion of coal gasification and carbocoal combustion is offered by the research on pyrolysis carbocoal.

热解半焦的研究为煤气化及半焦烧的分级转化技术提供了参考。

Sugariness is in digestive process, if the word because of without complete combustion corruption, will become lactic acid.

糖质在消化的过程中，如果因为没有完烧而腐败的话，将会变成乳酸。

All the results can be used to validate the autoignition and combustion models of homogeneous mixture in vitiated coflow.

为活化热氛围下液体料及烧模型的建立奠定了基础。

The technigue of staged coal combustion in underplate burning boiler is a mew method for energy saving and environment protecting.

层炉两段烧技术,是一种行之有效的节能、环保的新技术。

Besides, laser optoacoustic spectroscopy technique and laser mass spectrometry will play more important role in research of internal combustion engine.

另外，激光光声光谱技术、激光质谱仪等有望在内机的研究中发挥更大的作用。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,分析了补室长度对掺混流场和二次烧效率的影响。

Preliminary test of combusting property of COWS showed that this kind of synfuel had a good combustion behavior, and high combustion efficiency.

烧性实验表明，三元料浆的烧性能良好，烧效率高，是一种工业应用前景广阔的浆体。

The heat input of gasification using coalite as solid heat carrier comes from combustion heat of the solid heat carrier in riser.

固体热载体煤气化的热量靠提升烧产生。

Three technology options including precombusfion capture,oxyen-fired combustion and postcombustion capture and their process flows for capturing CO2 are introduced in this paper.

文章主介绍了3种CO2捕获技术:烧前捕获、纯氧烧、烧后捕获,并介绍了其工艺流程。

Multiphase flow is a new and developing discipline on the basis of hydrodynamics, heat and mass transfer, physiochemistry, combustion theory and other disciplines.

多相流是在流体力学传热传质学,生物化学,烧学等多学科的基础上发展起来的一门新兴学科.

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等温涡轮烧技术,提出了一种改进的概括性卡诺循环气轮机,通过模型预测分析了其性能,并与传统气轮机进行了比较。

The tribophysics of the cylinder liner—piston rings in an internal combustion engine is a typical tribological system with the reciprocating motion and the impacting motion.

内机缸套——活塞环摩擦副系统是一个集往复、冲击于一体的典型的摩擦学系统。

Both numerical prediction and experiments signified that the new type flameholder has a bright prospect as a kind of high combustion efficiency and low pressure loss flameholder.

无论计算还是实验，都表明新型稳定器作为高效 低阻火焰稳定器是很有发展前景的。

This paper discusses the fundamentals and characteristics of catalytic combustion and the type of catalyst and approaches the way to apply the technology of catalytic combustion in cremator.

本文对催化烧法的基本原理、特点及催化剂的形式等方面进行了讨论,并就催化烧技术在火化设备中实现的可能方法进行了探讨。

Soot is the product of the imperfect combustion of fuel.

煤烟是料不完的产物。

These results are instructively important for determining combustion heat safely.

这些结果对安地测定热具有指导意义。

Soot is usually the product of the imperfect combustion of fuel.

煤烟通常是料不完的产物。

Usually a gas cooler is used between the combustion chamber and hydrator.

通常在室和水合器之间设置一个气体冷却器。

A model of pyrotechnical combustion products was established based on the principle of minimum free-energy.

产物的预测对烟火药的设计非常重要。

The paper discusses the calculation and its property of the rate of combustion heatrelease for prechamber diesel engines.

文章讨论了予室柴油机的热规律的计算特点和方法。

Reference on step conversion of coal gasification and carbocoal combustion is offered by the research on pyrolysis carbocoal.

热解半焦的研究为煤气化及半焦的分级转化技术提供了参考。

Sugariness is in digestive process, if the word because of without complete combustion corruption, will become lactic acid.

糖质在消化的过程中，如果因为没有完而腐败的话，将会变成乳酸。

All the results can be used to validate the autoignition and combustion models of homogeneous mixture in vitiated coflow.

为活化热氛围下液体料自及模型的建立奠定了基础。

The technigue of staged coal combustion in underplate burning boiler is a mew method for energy saving and environment protecting.

层炉两段技术,是一种行之有效的节能、环保的新技术。

Besides, laser optoacoustic spectroscopy technique and laser mass spectrometry will play more important role in research of internal combustion engine.

另外，激光光声光谱技术、激光质谱仪等有望在内机的研究中挥更大的作用。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,分析了补室长度对掺混场和二次效率的影响。

Preliminary test of combusting property of COWS showed that this kind of synfuel had a good combustion behavior, and high combustion efficiency.

性实验表明，三元料浆的性能良好，效率高，是一种工业应用前景广阔的浆体。

The heat input of gasification using coalite as solid heat carrier comes from combustion heat of the solid heat carrier in riser.

固体热载体煤气化的热量靠提升产生。

Three technology options including precombusfion capture,oxyen-fired combustion and postcombustion capture and their process flows for capturing CO2 are introduced in this paper.

文章主要介绍了3种CO2捕获技术:前捕获、纯氧、后捕获,并介绍了其工艺程。

Multiphase flow is a new and developing discipline on the basis of hydrodynamics, heat and mass transfer, physiochemistry, combustion theory and other disciplines.

多相是在体力学传热传质学,生物化学,学等多学科的基础上展起来的一门新兴学科.

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等温涡轮技术,提出了一种改进的概括性卡诺循环气轮机,通过模型预测分析了其性能,并与传统气轮机进行了比较。

The tribophysics of the cylinder liner—piston rings in an internal combustion engine is a typical tribological system with the reciprocating motion and the impacting motion.

内机缸套——活塞环摩擦副系统是一个集往复、冲击于一体的典型的摩擦学系统。

Both numerical prediction and experiments signified that the new type flameholder has a bright prospect as a kind of high combustion efficiency and low pressure loss flameholder.

无论计算还是实验，都表明新型稳定器作为高效 低阻火焰稳定器是很有展前景的。

This paper discusses the fundamentals and characteristics of catalytic combustion and the type of catalyst and approaches the way to apply the technology of catalytic combustion in cremator.

本文对催化法的基本原理、特点及催化剂的形式等方面进行了讨论,并就催化技术在火化设备中实现的可能方法进行了探讨。

Soot is the product of the imperfect combustion of fuel.

煤烟是燃料不完燃烧的产物。

These results are instructively important for determining combustion heat safely.

这些结果对安地测定燃烧热具有指导意义。

Soot is usually the product of the imperfect combustion of fuel.

煤烟通常是燃料不完燃烧的产物。

Usually a gas cooler is used between the combustion chamber and hydrator.

通常在燃烧室和水合器之间设置一个气体冷却器。

A model of pyrotechnical combustion products was established based on the principle of minimum free-energy.

燃烧产物的预测对烟火药的设计非常重要。

The paper discusses the calculation and its property of the rate of combustion heatrelease for prechamber diesel engines.

文章予燃室柴油机的燃烧发热规律的计算特点和方法。

Reference on step conversion of coal gasification and carbocoal combustion is offered by the research on pyrolysis carbocoal.

热解半焦的研究为煤气化及半焦燃烧的分级转化技术提供参考。

Sugariness is in digestive process, if the word because of without complete combustion corruption, will become lactic acid.

糖质在消化的过程中，如果因为没有完燃烧而腐败的话，将会变成乳酸。

All the results can be used to validate the autoignition and combustion models of homogeneous mixture in vitiated coflow.

为活化热氛围下液体燃料自燃及燃烧模型的建立奠定基础。

The technigue of staged coal combustion in underplate burning boiler is a mew method for energy saving and environment protecting.

层燃炉两段燃烧技术,是一种行之有效的节能、环保的新技术。

Besides, laser optoacoustic spectroscopy technique and laser mass spectrometry will play more important role in research of internal combustion engine.

另外，激光光声光谱技术、激光质谱仪等有望在内燃机的研究中发挥更大的作用。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,分析补燃室长度对掺混流场和二次燃烧效率的影响。

Preliminary test of combusting property of COWS showed that this kind of synfuel had a good combustion behavior, and high combustion efficiency.

燃烧性实验表明，三元料浆的燃烧性能良好，燃烧效率高，是一种工业应用前景广阔的浆体。

The heat input of gasification using coalite as solid heat carrier comes from combustion heat of the solid heat carrier in riser.

固体热载体煤气化的热量靠提升燃烧产生。

Three technology options including precombusfion capture,oxyen-fired combustion and postcombustion capture and their process flows for capturing CO2 are introduced in this paper.

文章主要介绍3种CO2捕获技术:燃烧前捕获、纯氧燃烧、燃烧后捕获,并介绍其工艺流程。

Multiphase flow is a new and developing discipline on the basis of hydrodynamics, heat and mass transfer, physiochemistry, combustion theory and other disciplines.

多相流是在流体力学传热传质学,生物化学,燃烧学等多学科的基础上发展起来的一门新兴学科.

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等温涡轮燃烧技术,提出一种改进的概括性卡诺循环燃气轮机,通过模型预测分析其性能,并与传统燃气轮机进行比较。

The tribophysics of the cylinder liner—piston rings in an internal combustion engine is a typical tribological system with the reciprocating motion and the impacting motion.

内燃机缸套——活塞环摩擦副系统是一个集往复、冲击于一体的典型的摩擦学系统。

Both numerical prediction and experiments signified that the new type flameholder has a bright prospect as a kind of high combustion efficiency and low pressure loss flameholder.

无计算还是实验，都表明新型稳定器作为高效 低阻火焰稳定器是很有发展前景的。

This paper discusses the fundamentals and characteristics of catalytic combustion and the type of catalyst and approaches the way to apply the technology of catalytic combustion in cremator.

本文对催化燃烧法的基本原理、特点及催化剂的形式等方面进行,并就催化燃烧技术在火化设备中实现的可能方法进行探。

Soot is the product of the imperfect combustion of fuel.

烟是料不完的产物。

These results are instructively important for determining combustion heat safely.

这些结果对安地测定热具有指导意义。

Soot is usually the product of the imperfect combustion of fuel.

烟通常是料不完的产物。

Usually a gas cooler is used between the combustion chamber and hydrator.

通常在室和水合器之间设置一个气体冷却器。

A model of pyrotechnical combustion products was established based on the principle of minimum free-energy.

产物的预测对烟火药的设计非常重要。

The paper discusses the calculation and its property of the rate of combustion heatrelease for prechamber diesel engines.

文章讨论了予室柴油机的发热规律的计算特点和方法。

Reference on step conversion of coal gasification and carbocoal combustion is offered by the research on pyrolysis carbocoal.

热解半焦的研究为气化及半焦的分级转化技术提供了参考。

Sugariness is in digestive process, if the word because of without complete combustion corruption, will become lactic acid.

糖质在消化的过程中，如果因为没有完而腐败的话，将会变成乳酸。

All the results can be used to validate the autoignition and combustion models of homogeneous mixture in vitiated coflow.

为活化热氛围下液体料自及模型的建立奠定了基础。

The technigue of staged coal combustion in underplate burning boiler is a mew method for energy saving and environment protecting.

层炉两段技术,是一种行之有效的节能、环保的新技术。

Besides, laser optoacoustic spectroscopy technique and laser mass spectrometry will play more important role in research of internal combustion engine.

另外，激光光声光谱技术、激光质谱仪等有望在内机的研究中发挥更大的作用。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,分析了补室长度对掺混流场和二次效率的影响。

Preliminary test of combusting property of COWS showed that this kind of synfuel had a good combustion behavior, and high combustion efficiency.

性实验表明，三元料浆的性能良好，效率高，是一种工业应用前景广阔的浆体。

The heat input of gasification using coalite as solid heat carrier comes from combustion heat of the solid heat carrier in riser.

固体热载体气化的热量靠提升产生。

Three technology options including precombusfion capture,oxyen-fired combustion and postcombustion capture and their process flows for capturing CO2 are introduced in this paper.

文章主要介绍了3种CO2捕获技术:前捕获、纯氧、后捕获,并介绍了其工艺流程。

Multiphase flow is a new and developing discipline on the basis of hydrodynamics, heat and mass transfer, physiochemistry, combustion theory and other disciplines.

多相流是在流体力学传热传质学,生物化学,学等多学科的基础上发展起来的一门新兴学科.

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等温涡轮技术,提出了一种改进的概括性卡诺循环气轮机,通过模型预测分析了其性能,并与传统气轮机进行了比较。

The tribophysics of the cylinder liner—piston rings in an internal combustion engine is a typical tribological system with the reciprocating motion and the impacting motion.

内机缸套——活塞环摩擦副系统是一个集往复、冲击于一体的典型的摩擦学系统。

Both numerical prediction and experiments signified that the new type flameholder has a bright prospect as a kind of high combustion efficiency and low pressure loss flameholder.

无论计算还是实验，都表明新型稳定器作为高效 低阻火焰稳定器是很有发展前景的。

This paper discusses the fundamentals and characteristics of catalytic combustion and the type of catalyst and approaches the way to apply the technology of catalytic combustion in cremator.

本文对催化法的基本原理、特点及催化剂的形式等方面进行了讨论,并就催化技术在火化设备中实现的可能方法进行了探讨。

Soot is the product of the imperfect combustion of fuel.

煤烟是料不完烧的产物。

These results are instructively important for determining combustion heat safely.

这些结果对安地测定烧热具有指导意义。

Soot is usually the product of the imperfect combustion of fuel.

煤烟通常是料不完烧的产物。

Usually a gas cooler is used between the combustion chamber and hydrator.

通常在烧室和水合器之间置一个气体冷却器。

A model of pyrotechnical combustion products was established based on the principle of minimum free-energy.

烧产物的预测对烟火药的常重要。

The paper discusses the calculation and its property of the rate of combustion heatrelease for prechamber diesel engines.

文章讨论了予室柴油机的烧发热规律的算特点和方法。

Reference on step conversion of coal gasification and carbocoal combustion is offered by the research on pyrolysis carbocoal.

热解半焦的研究为煤气化及半焦烧的分级转化技术提供了参考。

Sugariness is in digestive process, if the word because of without complete combustion corruption, will become lactic acid.

糖质在消化的过程中，如果因为没有完烧而腐败的话，将会变成乳酸。

All the results can be used to validate the autoignition and combustion models of homogeneous mixture in vitiated coflow.

为活化热氛围下液体料自及烧模型的建立奠定了基础。

The technigue of staged coal combustion in underplate burning boiler is a mew method for energy saving and environment protecting.

层炉两段烧技术,是一种行之有效的节能、环保的新技术。

Besides, laser optoacoustic spectroscopy technique and laser mass spectrometry will play more important role in research of internal combustion engine.

另外，激光光声光谱技术、激光质谱仪等有望在机的研究中发挥更大的作用。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,分析了补室长度对掺混流场和二次烧效率的影响。

Preliminary test of combusting property of COWS showed that this kind of synfuel had a good combustion behavior, and high combustion efficiency.

烧性实验表明，三元料浆的烧性能良好，烧效率高，是一种工业应用前景广阔的浆体。

The heat input of gasification using coalite as solid heat carrier comes from combustion heat of the solid heat carrier in riser.

固体热载体煤气化的热量靠提升烧产生。

Three technology options including precombusfion capture,oxyen-fired combustion and postcombustion capture and their process flows for capturing CO2 are introduced in this paper.

文章主要介绍了3种CO2捕获技术:烧前捕获、纯氧烧、烧后捕获,并介绍了其工艺流程。

Multiphase flow is a new and developing discipline on the basis of hydrodynamics, heat and mass transfer, physiochemistry, combustion theory and other disciplines.

多相流是在流体力学传热传质学,生物化学,烧学等多学科的基础上发展起来的一门新兴学科.

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等温涡轮烧技术,提出了一种改进的概括性卡诺循环气轮机,通过模型预测分析了其性能,并与传统气轮机进行了比较。

The tribophysics of the cylinder liner—piston rings in an internal combustion engine is a typical tribological system with the reciprocating motion and the impacting motion.

机缸套——活塞环摩擦副系统是一个集往复、冲击于一体的典型的摩擦学系统。

Both numerical prediction and experiments signified that the new type flameholder has a bright prospect as a kind of high combustion efficiency and low pressure loss flameholder.

无论算还是实验，都表明新型稳定器作为高效 低阻火焰稳定器是很有发展前景的。

This paper discusses the fundamentals and characteristics of catalytic combustion and the type of catalyst and approaches the way to apply the technology of catalytic combustion in cremator.

本文对催化烧法的基本原理、特点及催化剂的形式等方面进行了讨论,并就催化烧技术在火化备中实现的可能方法进行了探讨。

Soot is the product of the imperfect combustion of fuel.

煤烟是料不完烧产物。

These results are instructively important for determining combustion heat safely.

这些结果对安地测定烧热具有指导意义。

Soot is usually the product of the imperfect combustion of fuel.

煤烟通常是料不完烧产物。

Usually a gas cooler is used between the combustion chamber and hydrator.

通常在烧室和水合器之间设置一个气体冷却器。

A model of pyrotechnical combustion products was established based on the principle of minimum free-energy.

烧产物预测对烟设计非常重要。

The paper discusses the calculation and its property of the rate of combustion heatrelease for prechamber diesel engines.

文章讨论了予室柴油烧发热规律计算特点和方法。

Reference on step conversion of coal gasification and carbocoal combustion is offered by the research on pyrolysis carbocoal.

热解半焦研究为煤气化及半焦烧分级转化技术提供了参考。

Sugariness is in digestive process, if the word because of without complete combustion corruption, will become lactic acid.

糖质在消化过程中，如果因为没有完烧而腐败话，将会变成乳酸。

All the results can be used to validate the autoignition and combustion models of homogeneous mixture in vitiated coflow.

为活化热氛围下液体料自及烧模型建立奠定了基础。

The technigue of staged coal combustion in underplate burning boiler is a mew method for energy saving and environment protecting.

层炉两段烧技术,是一种行之有效节能、环保新技术。

Besides, laser optoacoustic spectroscopy technique and laser mass spectrometry will play more important role in research of internal combustion engine.

另外，激光光声光谱技术、激光质谱仪等有望在内研究中发挥更大作用。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

结合直连式地面模拟试验,分析了补室长度对掺混流场和二次烧效率影响。

Preliminary test of combusting property of COWS showed that this kind of synfuel had a good combustion behavior, and high combustion efficiency.

烧性实验表明，三元料浆烧性能良好，烧效率高，是一种工业应用前景广阔浆体。

The heat input of gasification using coalite as solid heat carrier comes from combustion heat of the solid heat carrier in riser.

固体热载体煤气化热量靠提升烧产生。

Three technology options including precombusfion capture,oxyen-fired combustion and postcombustion capture and their process flows for capturing CO2 are introduced in this paper.

文章主要介绍了3种CO2捕获技术:烧前捕获、纯氧烧、烧后捕获,并介绍了其工艺流程。

Multiphase flow is a new and developing discipline on the basis of hydrodynamics, heat and mass transfer, physiochemistry, combustion theory and other disciplines.

多相流是在流体力学传热传质学,生物化学,烧学等多学科基础上发展起来一门新兴学科.

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等温涡轮烧技术,提出了一种改进概括性卡诺循环气轮,通过模型预测分析了其性能,并与传统气轮进行了比较。

The tribophysics of the cylinder liner—piston rings in an internal combustion engine is a typical tribological system with the reciprocating motion and the impacting motion.

内缸套——活塞环摩擦副系统是一个集往复、冲击于一体典型摩擦学系统。

Both numerical prediction and experiments signified that the new type flameholder has a bright prospect as a kind of high combustion efficiency and low pressure loss flameholder.

无论计算还是实验，都表明新型稳定器作为高效 低阻焰稳定器是很有发展前景。

This paper discusses the fundamentals and characteristics of catalytic combustion and the type of catalyst and approaches the way to apply the technology of catalytic combustion in cremator.

本文对催化烧法基本原理、特点及催化剂形式等方面进行了讨论,并就催化烧技术在化设备中实现可能方法进行了探讨。

Soot is the product of the imperfect combustion of fuel.

煤烟是料不完的产物。

These results are instructively important for determining combustion heat safely.

这对安地测定热具有指导意义。

Soot is usually the product of the imperfect combustion of fuel.

煤烟通常是料不完的产物。

Usually a gas cooler is used between the combustion chamber and hydrator.

通常在室和水合器之间设置一个气体冷却器。

A model of pyrotechnical combustion products was established based on the principle of minimum free-energy.

产物的预测对烟火药的设计非常重要。

The paper discusses the calculation and its property of the rate of combustion heatrelease for prechamber diesel engines.

文章讨论了予室柴油机的发热规律的计算特点和方法。

Reference on step conversion of coal gasification and carbocoal combustion is offered by the research on pyrolysis carbocoal.

热解半焦的研究为煤气化及半焦的分级转化技术提供了参考。

Sugariness is in digestive process, if the word because of without complete combustion corruption, will become lactic acid.

糖质在消化的过程中，如因为没有完而腐败的话，将会变成乳酸。

All the results can be used to validate the autoignition and combustion models of homogeneous mixture in vitiated coflow.

为活化热氛围下液体料自及模型的建立奠定了基础。

The technigue of staged coal combustion in underplate burning boiler is a mew method for energy saving and environment protecting.

层炉两段技术,是一种行之有效的节能、环保的新技术。

Besides, laser optoacoustic spectroscopy technique and laser mass spectrometry will play more important role in research of internal combustion engine.

另外，激光光声光谱技术、激光质谱仪等有望在内机的研究中发挥更大的作用。

The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

合直连式地面模拟试验,分析了补室长度对掺混流场和二次效率的影响。

Preliminary test of combusting property of COWS showed that this kind of synfuel had a good combustion behavior, and high combustion efficiency.

性实验表明，三元料浆的性能良好，效率高，是一种工业应用前景广阔的浆体。

The heat input of gasification using coalite as solid heat carrier comes from combustion heat of the solid heat carrier in riser.

固体热载体煤气化的热量靠提升产生。

Three technology options including precombusfion capture,oxyen-fired combustion and postcombustion capture and their process flows for capturing CO2 are introduced in this paper.

文章主要介绍了3种CO2捕获技术:前捕获、纯氧、后捕获,并介绍了其工艺流程。

Multiphase flow is a new and developing discipline on the basis of hydrodynamics, heat and mass transfer, physiochemistry, combustion theory and other disciplines.

多相流是在流体力学传热传质学,生物化学,学等多学科的基础上发展起来的一门新兴学科.

Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

基于气体多变压缩以及等温涡轮技术,提出了一种改进的概括性卡诺循环气轮机,通过模型预测分析了其性能,并与传统气轮机进行了比较。

The tribophysics of the cylinder liner—piston rings in an internal combustion engine is a typical tribological system with the reciprocating motion and the impacting motion.

内机缸套——活塞环摩擦副系统是一个集往复、冲击于一体的典型的摩擦学系统。

Both numerical prediction and experiments signified that the new type flameholder has a bright prospect as a kind of high combustion efficiency and low pressure loss flameholder.

无论计算还是实验，都表明新型稳定器作为高效 低阻火焰稳定器是很有发展前景的。

This paper discusses the fundamentals and characteristics of catalytic combustion and the type of catalyst and approaches the way to apply the technology of catalytic combustion in cremator.

本文对催化法的基本原理、特点及催化剂的形式等方面进行了讨论,并就催化技术在火化设备中实现的可能方法进行了探讨。