The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轴和曲轴协旋转, 但速度仅是曲轴的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轴、摩擦嵌套、变速箱、支架、飞等。

In case that the camshaft signal measured by the first falling edge after dentation is low, then the following TDC would be of the first cylinder.

若缺齿后第一沿检测到凸信号为低，则接来的TDC是一缸TDC。

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮轴和曲轴协旋转, 但速度仅是曲轴的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、支架、轮等。

In case that the camshaft signal measured by the first falling edge after dentation is low, then the following TDC would be of the first cylinder.

若第一个下降沿检测到凸轮信号为低，则接下来的TDC是一TDC。

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮和曲协旋转, 但速度仅是曲半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲、凸轮、摩擦嵌套、变速箱、支架、飞轮等。

In case that the camshaft signal measured by the first falling edge after dentation is low, then the following TDC would be of the first cylinder.

若缺齿后第个下降沿检测到凸轮信号为低，则接下来TDC是缸TDC。

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮和曲协旋转, 但速度仅是曲的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲、凸轮、嵌套、变速箱、支架、飞轮等。

In case that the camshaft signal measured by the first falling edge after dentation is low, then the following TDC would be of the first cylinder.

若缺齿后第一个下降沿检测到凸轮信号为低，则接下来的TDC是一缸TDC。

The camshaft rotates in phase with the crankshaft, but at half its speed.

和曲协旋转, 但速曲的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲、、摩擦嵌套、变速箱、支架、飞等。

In case that the camshaft signal measured by the first falling edge after dentation is low, then the following TDC would be of the first cylinder.

若缺齿后第一个下降沿检测到信号为低，则接下来的TDC一缸TDC。

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮轴和曲轴协旋转, 但速度仅是曲轴的一。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、支架、飞轮等。

In case that the camshaft signal measured by the first falling edge after dentation is low, then the following TDC would be of the first cylinder.

若缺齿后第一个下降沿检测到凸轮信号为低，则接下来的TDC是一缸TDC。

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮轴和曲轴协旋转, 但速度仅是曲轴的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、套、变速箱、支架、飞轮等。

In case that the camshaft signal measured by the first falling edge after dentation is low, then the following TDC would be of the first cylinder.

若缺齿后第一个下降沿检测到凸轮信号为低，则接下来的TDC是一缸TDC。

The camshaft rotates in phase with the crankshaft, but at half its speed.

轮和协旋转, 但速度仅的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、、轮、摩擦嵌套、变速箱、支架、飞轮等。

In case that the camshaft signal measured by the first falling edge after dentation is low, then the following TDC would be of the first cylinder.

若缺齿后第一个下降沿检测到轮信号为低，则接下来的TDC一缸TDC。

The camshaft rotates in phase with the crankshaft, but at half its speed.

凸轮轴和曲轴协旋转, 但速度仅是曲轴的一半。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩、变速箱、支架、飞轮等。

In case that the camshaft signal measured by the first falling edge after dentation is low, then the following TDC would be of the first cylinder.

若缺齿后第一个下降沿检测到凸轮信号为低，则接下来的TDC是一缸TDC。