In this paper, we conceptualize and operationalize relationship bonding tactics of E-Tailor.

摘要本文从卖方角度界定了网络零售商关系纽带策略的概念，给出了操作化定。

At present there exist two kinds of manufacturing met hods for silicon-based lasers,i.e.,heteroepitaxy and bonding.

目前制作硅基激光器的方法主要分为两类，异质外延生长和异质材料键合。

Fabrics are produced by bonding yarns together in terms of weaving or knitting, lacemaking, braiding or felting.

在网状构以及处理组合、烘乾、热定形等备的辅助下，非编织布料也可被使用。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物粘贴在工具上.Cloth 2.P40Z至P100的砂纸粘贴再皮革上.

The immobilization methods including absorption,covalent bonding, and combination of above two methods) and classification of inulinase were introduced.

介绍了酶固定化（包括吸附法、共价法以及吸附法与共价法合使用方法）及菊粉酶的种类。

In addition,The general macrograph characters of spalling of bonding layer and shallow working lining,and their causes were described.

总了轧辊磨损预报模型的研究现状,并详细介绍了典型的磨损预报模型,最后展望了冷轧辊研究工作的方向。

Besides, immediately following the implantation of the cementless porous-coated hip endoprosthesis, no bonding exists between the femur and the prosthesis.

而孔洞被覆式人工髋关节刚植入后，髋关节与大腿骨之间亦呈未合状态。

Coordination Chemistry: Characterization of the electronic structure and the bonding characteristic of nonplanar metalloporphyrins in different oxidation and spin states.

探讨非平面金属在各种不同氧化态和自旋态之电子构和键特性。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏合剂同纸板表面的黏合剂间形成一个集合，这种粘合本身分子间的粘合称为凝聚粘合。

The mechanical performance of RGD7 high-energy nitroamine propellant had been greatly improved by adding bonding agent in the formulation of the propellant.

用配方体系中加入键合剂方法改善了高能硝胺发射药的力学性能。

A helical conformation of a polypeptide chain, usually right-handed, with maximal intrachain hydrogen bonding; one of the most common secondary structures in proteins.

折叠是由若干肽段或肽链排列起来所形成的相当伸展的片层构象。

Applying a photopolymer resin instead of thermopolymer resin as a bonding material,a rapid manufacturing of grinding wheel is realized on the basis of rapid prototyping.

将光固化树脂代替热固化树脂作为合剂，利用快速成型原理实现了砂轮的快速制造。

By applying a photopolymer resin instead of the thermopolymer resin as a bonding material,a rapid manufacturing processing of grinding wheel is realized on the basis of rapid prototyping.

将光敏树脂代替热固化树脂作为合剂,利用快速成型原理可以实现砂轮的快速制造。

The status quo and progress in reaction wetting, reactive brazer, interfacial reaction, joint strength and partial transient liquid-phase bonding were reviewed in this paper.

本文综述了近年来在应浸润、活性钎料、界面应、连接强度和部分瞬间液相连接方面的研究现状和进展,指出了有待进一步研究的问题。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧矿中铁氧化物均以赤铁矿、磁铁矿为主，粘相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

In this paper, we conceptualize and operationalize relationship bonding tactics of E-Tailor.

摘要本文从卖方角度界定了网络零售商关系纽带策略的概念，给出了操作化定义。

At present there exist two kinds of manufacturing met hods for silicon-based lasers,i.e.,heteroepitaxy and bonding.

目前制作硅基激光器的方法主要分为两类，异质外延生长和异质材料键。

Fabrics are produced by bonding yarns together in terms of weaving or knitting, lacemaking, braiding or felting.

在网状构以及处理、乾、热定形等装订设备的辅助下，非编织布料也可被使用。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物粘贴在工具上.Cloth 2.P40Z至P100的砂纸粘贴再皮革上.

The immobilization methods including absorption,covalent bonding, and combination of above two methods) and classification of inulinase were introduced.

介绍了酶固定化（包括吸附法、共价法以及吸附法与共价法使用方法）及菊粉酶的种类。

In addition,The general macrograph characters of spalling of bonding layer and shallow working lining,and their causes were described.

总了轧辊磨损预报模型的研究现状,并详细介绍了典型的磨损预报模型,最后展望了冷轧辊研究工作的方向。

Besides, immediately following the implantation of the cementless porous-coated hip endoprosthesis, no bonding exists between the femur and the prosthesis.

而孔洞被覆式人工髋关节刚植入后，髋关节与大腿骨之间亦呈未状态。

Coordination Chemistry: Characterization of the electronic structure and the bonding characteristic of nonplanar metalloporphyrins in different oxidation and spin states.

探讨非平面金属在各种不同氧化态和自旋态之电子构和键特性。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏剂同纸板表面的黏剂间形成一个集，这种粘本身分子间的粘称为凝聚粘。

The mechanical performance of RGD7 high-energy nitroamine propellant had been greatly improved by adding bonding agent in the formulation of the propellant.

用配方体系中加入键剂方法改善了高能硝胺发射药的力学性能。

A helical conformation of a polypeptide chain, usually right-handed, with maximal intrachain hydrogen bonding; one of the most common secondary structures in proteins.

折叠是由若干肽段或肽链排列起来所形成的相当伸展的片层构象。

Applying a photopolymer resin instead of thermopolymer resin as a bonding material,a rapid manufacturing of grinding wheel is realized on the basis of rapid prototyping.

将光固化树脂代替热固化树脂作为剂，利用快速成型原理实现了砂轮的快速制造。

By applying a photopolymer resin instead of the thermopolymer resin as a bonding material,a rapid manufacturing processing of grinding wheel is realized on the basis of rapid prototyping.

将光敏树脂代替热固化树脂作为剂,利用快速成型原理可以实现砂轮的快速制造。

The status quo and progress in reaction wetting, reactive brazer, interfacial reaction, joint strength and partial transient liquid-phase bonding were reviewed in this paper.

本文综述了近年来在反应浸润、活性钎料、界面反应、连接强度和部分瞬间液相连接方面的研究现状和进展,指出了有待进一步研究的问题。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧矿中铁氧化物均以赤铁矿、磁铁矿为主，粘相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

In this paper, we conceptualize and operationalize relationship bonding tactics of E-Tailor.

摘要本文从卖方角度界定了网络零售商关系纽带策略的概念，给出了操作化定义。

At present there exist two kinds of manufacturing met hods for silicon-based lasers,i.e.,heteroepitaxy and bonding.

目前制作硅基激光器的方法主要分为两类，异质外延生长和异质合。

Fabrics are produced by bonding yarns together in terms of weaving or knitting, lacemaking, braiding or felting.

在网状构以及处理组合、烘乾、热定形等装订设备的辅助下，非编织布也可被使用。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物粘贴在工具上.Cloth 2.P40Z至P100的砂纸粘贴再皮革上.

The immobilization methods including absorption,covalent bonding, and combination of above two methods) and classification of inulinase were introduced.

介绍了酶固定化（包括吸附法、法以及吸附法与法合使用方法）及菊粉酶的种类。

In addition,The general macrograph characters of spalling of bonding layer and shallow working lining,and their causes were described.

总了轧辊磨损预报模型的研究现状,并详细介绍了典型的磨损预报模型,最后展望了冷轧辊研究工作的方向。

Besides, immediately following the implantation of the cementless porous-coated hip endoprosthesis, no bonding exists between the femur and the prosthesis.

而孔洞被覆式人工髋关节刚植入后，髋关节与大腿骨之间亦呈未合状态。

Coordination Chemistry: Characterization of the electronic structure and the bonding characteristic of nonplanar metalloporphyrins in different oxidation and spin states.

探讨非平面金属在各种不同氧化态和自旋态之电子构和特性。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏合剂同纸板表面的黏合剂间形成一个集合，这种粘合本身分子间的粘合称为凝聚粘合。

The mechanical performance of RGD7 high-energy nitroamine propellant had been greatly improved by adding bonding agent in the formulation of the propellant.

用配方体系中加入合剂方法改善了高能硝胺发射药的力学性能。

A helical conformation of a polypeptide chain, usually right-handed, with maximal intrachain hydrogen bonding; one of the most common secondary structures in proteins.

折叠是由若干肽段或肽链排列起来所形成的相当伸展的片层构象。

Applying a photopolymer resin instead of thermopolymer resin as a bonding material,a rapid manufacturing of grinding wheel is realized on the basis of rapid prototyping.

将光固化树脂代替热固化树脂作为合剂，利用快速成型原理实现了砂轮的快速制造。

By applying a photopolymer resin instead of the thermopolymer resin as a bonding material,a rapid manufacturing processing of grinding wheel is realized on the basis of rapid prototyping.

将光敏树脂代替热固化树脂作为合剂,利用快速成型原理可以实现砂轮的快速制造。

The status quo and progress in reaction wetting, reactive brazer, interfacial reaction, joint strength and partial transient liquid-phase bonding were reviewed in this paper.

本文综述了近年来在反应浸润、活性钎、界面反应、连接强度和部分瞬间液相连接方面的研究现状和进展,指出了有待进一步研究的问题。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧矿中铁氧化物均以赤铁矿、磁铁矿为主，粘相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

In this paper, we conceptualize and operationalize relationship bonding tactics of E-Tailor.

摘要本文从卖方角度界定了网络零售商关系纽带策略的概念，给出了操作化定义。

At present there exist two kinds of manufacturing met hods for silicon-based lasers,i.e.,heteroepitaxy and bonding.

目前制作硅基激光器的方法主要分为两类，异质外延生长和异质材料合。

Fabrics are produced by bonding yarns together in terms of weaving or knitting, lacemaking, braiding or felting.

在网状构以及处理组合、烘乾、热定形等装订设备的辅助下，非编织布料也可被使用。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物贴在工具上.Cloth 2.P40Z至P100的砂纸贴再皮革上.

The immobilization methods including absorption,covalent bonding, and combination of above two methods) and classification of inulinase were introduced.

介绍了酶固定化（包括吸附法、价法以及吸附法与价法合使用方法）及菊粉酶的种类。

In addition,The general macrograph characters of spalling of bonding layer and shallow working lining,and their causes were described.

总了轧辊磨损预报模型的研究现状,并详细介绍了典型的磨损预报模型,最后展望了冷轧辊研究工作的方向。

Besides, immediately following the implantation of the cementless porous-coated hip endoprosthesis, no bonding exists between the femur and the prosthesis.

而孔洞被覆式人工髋关节刚植入后，髋关节与大腿骨之间亦呈未合状态。

Coordination Chemistry: Characterization of the electronic structure and the bonding characteristic of nonplanar metalloporphyrins in different oxidation and spin states.

探讨非平面金属在各种不同氧化态和自旋态之电子构和特性。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏合同纸板表面的黏合间形成一个集合，这种合本身分子间的合称为凝聚合。

The mechanical performance of RGD7 high-energy nitroamine propellant had been greatly improved by adding bonding agent in the formulation of the propellant.

用配方体系中加入合方法改善了高能硝胺发射药的力学性能。

A helical conformation of a polypeptide chain, usually right-handed, with maximal intrachain hydrogen bonding; one of the most common secondary structures in proteins.

折叠是由若干肽段或肽链排列起来所形成的相当伸展的片层构象。

Applying a photopolymer resin instead of thermopolymer resin as a bonding material,a rapid manufacturing of grinding wheel is realized on the basis of rapid prototyping.

将光固化树脂代替热固化树脂作为合，利用快速成型原理实现了砂轮的快速制造。

By applying a photopolymer resin instead of the thermopolymer resin as a bonding material,a rapid manufacturing processing of grinding wheel is realized on the basis of rapid prototyping.

将光敏树脂代替热固化树脂作为合,利用快速成型原理可以实现砂轮的快速制造。

The status quo and progress in reaction wetting, reactive brazer, interfacial reaction, joint strength and partial transient liquid-phase bonding were reviewed in this paper.

本文综述了近年来在反应浸润、活性钎料、界面反应、连接强度和部分瞬间液相连接方面的研究现状和进展,指出了有待进一步研究的问题。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧矿中铁氧化物均以赤铁矿、磁铁矿为主，相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

In this paper, we conceptualize and operationalize relationship bonding tactics of E-Tailor.

摘要本文从卖方角度界定了网络零售商关系纽带策略的概念，给出了操作定义。

At present there exist two kinds of manufacturing met hods for silicon-based lasers,i.e.,heteroepitaxy and bonding.

目前制作硅基激光器的方法主要分为两类，异质外延生长和异质材料键。

Fabrics are produced by bonding yarns together in terms of weaving or knitting, lacemaking, braiding or felting.

在网状构以及处理组、烘乾、热定形等装订设备的辅助下，非编织布料也可被使用。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物粘贴在工具上.Cloth 2.P40Z至P100的砂纸粘贴再皮革上.

The immobilization methods including absorption,covalent bonding, and combination of above two methods) and classification of inulinase were introduced.

介绍了酶固定（包括吸附法、共价法以及吸附法与共价法使用方法）及菊粉酶的种类。

In addition,The general macrograph characters of spalling of bonding layer and shallow working lining,and their causes were described.

总了轧辊磨损预报模型的研究现状,并详细介绍了典型的磨损预报模型,最后展望了冷轧辊研究工作的方向。

Besides, immediately following the implantation of the cementless porous-coated hip endoprosthesis, no bonding exists between the femur and the prosthesis.

而孔洞被覆式人工髋关节刚植入后，髋关节与大腿骨之间亦呈未状态。

Coordination Chemistry: Characterization of the electronic structure and the bonding characteristic of nonplanar metalloporphyrins in different oxidation and spin states.

探讨非平面金属在各种不同氧态和自旋态之电子构和键特性。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏剂同纸板表面的黏剂间形成一个集，这种粘本身分子间的粘称为凝聚粘。

The mechanical performance of RGD7 high-energy nitroamine propellant had been greatly improved by adding bonding agent in the formulation of the propellant.

用配方体系中加入键剂方法改善了高能硝胺发射药的力学性能。

A helical conformation of a polypeptide chain, usually right-handed, with maximal intrachain hydrogen bonding; one of the most common secondary structures in proteins.

折叠是由若干肽段或肽链排列起来所形成的相当伸展的层构象。

Applying a photopolymer resin instead of thermopolymer resin as a bonding material,a rapid manufacturing of grinding wheel is realized on the basis of rapid prototyping.

将光固树脂代替热固树脂作为剂，利用快速成型原理实现了砂轮的快速制造。

By applying a photopolymer resin instead of the thermopolymer resin as a bonding material,a rapid manufacturing processing of grinding wheel is realized on the basis of rapid prototyping.

将光敏树脂代替热固树脂作为剂,利用快速成型原理可以实现砂轮的快速制造。

The status quo and progress in reaction wetting, reactive brazer, interfacial reaction, joint strength and partial transient liquid-phase bonding were reviewed in this paper.

本文综述了近年来在反应浸润、活性钎料、界面反应、连接强度和部分瞬间液相连接方面的研究现状和进展,指出了有待进一步研究的问题。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧矿中铁氧物均以赤铁矿、磁铁矿为主，粘相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

In this paper, we conceptualize and operationalize relationship bonding tactics of E-Tailor.

摘要本文从卖方角度界定了网络零售商关系纽带策略概念，给出了操作化定义。

At present there exist two kinds of manufacturing met hods for silicon-based lasers,i.e.,heteroepitaxy and bonding.

目前制作硅基激光器方法主要为两类，异质外延生长和异质材料键合。

Fabrics are produced by bonding yarns together in terms of weaving or knitting, lacemaking, braiding or felting.

在网状构以及处理组合、烘乾、热定形等装订设助下，非编织布料也可被使用。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨编织abrasive (sand) complect:1. 以寛115毫米氯丁(二烯)橡胶为底织物粘贴在工具上.Cloth 2.P40Z至P100砂纸粘贴再皮革上.

The immobilization methods including absorption,covalent bonding, and combination of above two methods) and classification of inulinase were introduced.

介绍了酶固定化（包括吸附法、共价法以及吸附法与共价法合使用方法）及菊粉酶种类。

In addition,The general macrograph characters of spalling of bonding layer and shallow working lining,and their causes were described.

总了轧辊磨损预报模型研究现状,并详细介绍了典型磨损预报模型,最后展望了冷轧辊研究工作方向。

Besides, immediately following the implantation of the cementless porous-coated hip endoprosthesis, no bonding exists between the femur and the prosthesis.

而孔洞被覆式人工髋关节刚植入后，髋关节与大腿骨之间亦呈未合状态。

Coordination Chemistry: Characterization of the electronic structure and the bonding characteristic of nonplanar metalloporphyrins in different oxidation and spin states.

探讨非平面金属在各种不同氧化态和自旋态之电子构和键特性。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板黏合剂同纸板表面黏合剂间形成一个集合，这种粘合本身子间粘合称为凝聚粘合。

The mechanical performance of RGD7 high-energy nitroamine propellant had been greatly improved by adding bonding agent in the formulation of the propellant.

用配方体系中加入键合剂方法改善了高能硝胺发射药力学性能。

A helical conformation of a polypeptide chain, usually right-handed, with maximal intrachain hydrogen bonding; one of the most common secondary structures in proteins.

折叠是由若干肽段或肽链排列起来所形成相当伸展片层构象。

Applying a photopolymer resin instead of thermopolymer resin as a bonding material,a rapid manufacturing of grinding wheel is realized on the basis of rapid prototyping.

将光固化树脂代替热固化树脂作为合剂，利用快速成型原理实现了砂轮快速制造。

By applying a photopolymer resin instead of the thermopolymer resin as a bonding material,a rapid manufacturing processing of grinding wheel is realized on the basis of rapid prototyping.

将光敏树脂代替热固化树脂作为合剂,利用快速成型原理可以实现砂轮快速制造。

The status quo and progress in reaction wetting, reactive brazer, interfacial reaction, joint strength and partial transient liquid-phase bonding were reviewed in this paper.

本文综述了年来在反应浸润、活性钎料、界面反应、连接强度和部瞬间液相连接方面研究现状和进展,指出了有待进一步研究问题。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%两种烧矿中铁氧化物均以赤铁矿、磁铁矿为主，粘相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

In this paper, we conceptualize and operationalize relationship bonding tactics of E-Tailor.

摘要本文从卖方角度界定了网络零售商关系纽带策略的概念，给出了操化定义。

At present there exist two kinds of manufacturing met hods for silicon-based lasers,i.e.,heteroepitaxy and bonding.

目前制硅基激光器的方法主要分为，质外延生长和质材料键。

Fabrics are produced by bonding yarns together in terms of weaving or knitting, lacemaking, braiding or felting.

在网状构以及处理组、烘乾、热定形等装订设备的辅助下，非编织布料也可被使用。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物粘贴在工具上.Cloth 2.P40Z至P100的砂纸粘贴再皮革上.

The immobilization methods including absorption,covalent bonding, and combination of above two methods) and classification of inulinase were introduced.

介绍了酶固定化（包括吸附法、共价法以及吸附法与共价法使用方法）及菊粉酶的种。

In addition,The general macrograph characters of spalling of bonding layer and shallow working lining,and their causes were described.

总了轧辊磨损预报模型的研究现状,并详细介绍了典型的磨损预报模型,最后展望了冷轧辊研究工的方向。

Besides, immediately following the implantation of the cementless porous-coated hip endoprosthesis, no bonding exists between the femur and the prosthesis.

而孔洞被覆式人工髋关节刚植入后，髋关节与大腿骨之间亦呈未状态。

Coordination Chemistry: Characterization of the electronic structure and the bonding characteristic of nonplanar metalloporphyrins in different oxidation and spin states.

探讨非平面金属在各种不同氧化态和自旋态之电子构和键特性。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏剂同纸板表面的黏剂间形成一个集，这种粘本身分子间的粘称为凝聚粘。

The mechanical performance of RGD7 high-energy nitroamine propellant had been greatly improved by adding bonding agent in the formulation of the propellant.

用方体系中加入键剂方法改善了高能硝胺发射药的力学性能。

A helical conformation of a polypeptide chain, usually right-handed, with maximal intrachain hydrogen bonding; one of the most common secondary structures in proteins.

折叠是由若干肽段或肽链排列起来所形成的相当伸展的片层构象。

Applying a photopolymer resin instead of thermopolymer resin as a bonding material,a rapid manufacturing of grinding wheel is realized on the basis of rapid prototyping.

将光固化树脂代替热固化树脂为剂，利用快速成型原理实现了砂轮的快速制造。

By applying a photopolymer resin instead of the thermopolymer resin as a bonding material,a rapid manufacturing processing of grinding wheel is realized on the basis of rapid prototyping.

将光敏树脂代替热固化树脂为剂,利用快速成型原理可以实现砂轮的快速制造。

The status quo and progress in reaction wetting, reactive brazer, interfacial reaction, joint strength and partial transient liquid-phase bonding were reviewed in this paper.

本文综述了近年来在反应浸润、活性钎料、界面反应、连接强度和部分瞬间液相连接方面的研究现状和进展,指出了有待进一步研究的问题。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

比为25%和50%的种烧矿中铁氧化物均以赤铁矿、磁铁矿为主，粘相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

In this paper, we conceptualize and operationalize relationship bonding tactics of E-Tailor.

摘要本文从卖方角度界定了网络零售商关系纽带策略的概念，给出了操作化定义。

At present there exist two kinds of manufacturing met hods for silicon-based lasers,i.e.,heteroepitaxy and bonding.

目前制作硅基激光器的方法主要分为两类，异质外延生长和异质材键。

Fabrics are produced by bonding yarns together in terms of weaving or knitting, lacemaking, braiding or felting.

在网状构以及处理组、烘乾、热定形等装订设备的辅助下，非编织布也可被使用。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物粘贴在工具上.Cloth 2.P40Z至P100的砂纸粘贴再皮革上.

The immobilization methods including absorption,covalent bonding, and combination of above two methods) and classification of inulinase were introduced.

介绍了酶固定化（包括吸附法、法以及吸附法与法使用方法）及菊粉酶的种类。

In addition,The general macrograph characters of spalling of bonding layer and shallow working lining,and their causes were described.

总了轧辊磨损预报模型的研究现状,并详细介绍了典型的磨损预报模型,最后展望了冷轧辊研究工作的方向。

Besides, immediately following the implantation of the cementless porous-coated hip endoprosthesis, no bonding exists between the femur and the prosthesis.

而孔洞被覆式人工髋关节刚植入后，髋关节与大腿骨之间亦呈未状态。

Coordination Chemistry: Characterization of the electronic structure and the bonding characteristic of nonplanar metalloporphyrins in different oxidation and spin states.

探讨非平面金属在各种不同氧化态和自旋态之电子构和键特性。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏剂同纸板表面的黏剂间形成一个集，这种粘本身分子间的粘称为凝聚粘。

The mechanical performance of RGD7 high-energy nitroamine propellant had been greatly improved by adding bonding agent in the formulation of the propellant.

用配方体系中加入键剂方法改善了高能硝胺发射药的力学性能。

A helical conformation of a polypeptide chain, usually right-handed, with maximal intrachain hydrogen bonding; one of the most common secondary structures in proteins.

折叠是由若干肽段或肽链排列起来所形成的相当伸展的片构象。

Applying a photopolymer resin instead of thermopolymer resin as a bonding material,a rapid manufacturing of grinding wheel is realized on the basis of rapid prototyping.

将光固化树脂代替热固化树脂作为剂，利用快速成型原理实现了砂轮的快速制造。

By applying a photopolymer resin instead of the thermopolymer resin as a bonding material,a rapid manufacturing processing of grinding wheel is realized on the basis of rapid prototyping.

将光敏树脂代替热固化树脂作为剂,利用快速成型原理可以实现砂轮的快速制造。

The status quo and progress in reaction wetting, reactive brazer, interfacial reaction, joint strength and partial transient liquid-phase bonding were reviewed in this paper.

本文综述了近年来在反应浸润、活性钎、界面反应、连接强度和部分瞬间液相连接方面的研究现状和进展,指出了有待进一步研究的问题。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧矿中铁氧化物均以赤铁矿、磁铁矿为主，粘相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

In this paper, we conceptualize and operationalize relationship bonding tactics of E-Tailor.

摘要本文从卖方角度界定了网络零售商关系纽带策略的概念，给出了操作化定义。

At present there exist two kinds of manufacturing met hods for silicon-based lasers,i.e.,heteroepitaxy and bonding.

目前制作硅基激光器的方法主要分为两类，异质外延生长和异质材料键。

Fabrics are produced by bonding yarns together in terms of weaving or knitting, lacemaking, braiding or felting.

在网状构以及处理组、烘乾、热定形等装订设备的辅助下，非编织布料也可被使用。

Grinding paper with self bonding nappa base (for fixinf on cloth ) with grain P40 up to P100.

研磨的编织abrasive (sand) complect:1. 以寛115毫米的氯丁(二烯)橡胶为底的织物贴在工具上.Cloth 2.P40Z至P100的砂纸贴再皮革上.

The immobilization methods including absorption,covalent bonding, and combination of above two methods) and classification of inulinase were introduced.

介绍了酶固定化（包括吸附法、共价法以及吸附法与共价法使用方法）及菊粉酶的种类。

In addition,The general macrograph characters of spalling of bonding layer and shallow working lining,and their causes were described.

总了轧辊磨损预报模型的研究现状,并详细介绍了典型的磨损预报模型,最后展望了冷轧辊研究工作的方向。

Besides, immediately following the implantation of the cementless porous-coated hip endoprosthesis, no bonding exists between the femur and the prosthesis.

而孔洞被覆式人工髋关节刚植入后，髋关节与大腿骨之间亦呈未状态。

Coordination Chemistry: Characterization of the electronic structure and the bonding characteristic of nonplanar metalloporphyrins in different oxidation and spin states.

探讨非平面金属在各种不同氧化态和自旋态之电子构和键特性。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏剂同纸板表面的黏剂间形成一个集，这种本身分子间的称为凝聚。

The mechanical performance of RGD7 high-energy nitroamine propellant had been greatly improved by adding bonding agent in the formulation of the propellant.

用配方体系中加入键剂方法改善了高能硝胺发射药的力学性能。

A helical conformation of a polypeptide chain, usually right-handed, with maximal intrachain hydrogen bonding; one of the most common secondary structures in proteins.

折叠是由若干肽段或肽链排列起来所形成的相当伸展的片层构象。

Applying a photopolymer resin instead of thermopolymer resin as a bonding material,a rapid manufacturing of grinding wheel is realized on the basis of rapid prototyping.

将光固化树脂代替热固化树脂作为剂，利用快速成型原理实现了砂轮的快速制造。

By applying a photopolymer resin instead of the thermopolymer resin as a bonding material,a rapid manufacturing processing of grinding wheel is realized on the basis of rapid prototyping.

将光敏树脂代替热固化树脂作为剂,利用快速成型原理可以实现砂轮的快速制造。

The status quo and progress in reaction wetting, reactive brazer, interfacial reaction, joint strength and partial transient liquid-phase bonding were reviewed in this paper.

本文综述了近年来在反应浸润、活性钎料、界面反应、连强度和部分瞬间液相连方面的研究现状和进展,指出了有待进一步研究的问题。

For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧矿中铁氧化物均以赤铁矿、磁铁矿为主，相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。