The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

FTIR、DSC等方法究了含恶唑啉官能团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

差示扫描量热计（DSC）究了单基、双基和三基药热分解性能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利红外光谱、光电子能谱、差热分析、核磁共振、X射线衍射等方法对聚硅氧改性丙烯酸酯共聚物的结构和性能进行了究。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运差热分析和热重分析对储氢材料的放氢温度和放氢量进行了测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应DSC、热台、扫描电镜以及偏光显微镜等究了PA6-PEG嵌共聚物的结晶性能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手，究了乙烯共聚单体含量的变化对VERSIFY共聚物结晶性能、力学性能和粘弹性能的影响。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速等手究了UHMWPE熔纺丝在超拉伸过程中结构性能的变化。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本究采DSC和热膨胀仪对两种石英砂的原砂和焙烧砂在加热过程中的相变和热膨胀进行了分析。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

FTIR、DSC等方法研究了含恶唑啉官能团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

描量计（DSC）研究了单基、双基和三基药分解性能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利红外光谱、光电子能谱、分析、核磁共振、X射线衍射等方法对聚硅氧改性丙烯酸酯共聚物的结构和性能进行了研究。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运分析和重分析对储氢材料的放氢温度和放氢量进行了测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

DSC、台、描电镜以及偏光显微镜等研究了PA6-PEG嵌段共聚物的结晶性能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手段，研究了乙烯共聚单体含量的变化对VERSIFY共聚物结晶性能、力学性能和粘弹性能的影响。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助描电子显微镜（SEM）、分析（DSC）、广角X射线衍射（WAXD）、声速等手段研究了UHMWPE熔纺丝在超拉伸过程中结构性能的变化。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研究采DSC和膨胀仪对两种石英砂的原砂和焙烧砂在加过程中的相变和膨胀进行了分析。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法研究了含恶唑啉官能团的苯乙烯(RPS)与氯化乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描量热计（DSC）研究了单基、双基和三基药热分解性能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光谱、光电子能谱、差热分析、核磁振、X射线衍射等方法对硅氧改性丙烯酸酯的结构和性能进行了研究。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差热分析和热重分析对储氢材料的放氢温度和放氢量进行了测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、热台、扫描电镜以及偏光显微镜等研究了PA6-PEG嵌段的结晶性能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手段，研究了乙烯单体含量的变化对VERSIFY结晶性能、力学性能和粘弹性能的影响。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速等手段研究了UHMWPE熔纺丝在超拉伸过程中结构性能的变化。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研究采用DSC和热膨胀仪对两种石英砂的原砂和焙烧砂在加热过程中的相变和热膨胀进行了分析。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

FTIR、DSC等方法研了含恶唑啉官团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

差示扫描量热计（DSC）研了单基、双基和三基药热分解性。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利红外光、光电、差热分析、核磁共振、X射线衍射等方法对聚硅氧改性丙烯酸酯共聚物的结构和性进行了研。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

差热分析和热重分析对储氢材料的放氢温度和放氢量进行了测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应DSC、热台、扫描电镜以及偏光显微镜等研了PA6-PEG嵌段共聚物的结晶性。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手段，研了乙烯共聚单体含量的变化对VERSIFY共聚物结晶性、力学性和粘弹性的影响。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速等手段研了UHMWPE熔纺丝在超拉伸过程中结构性的变化。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研采DSC和热膨胀仪对两种石英砂的原砂和焙烧砂在加热过程中的相变和热膨胀进行了分析。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法研究了含恶唑啉官能团的聚苯乙烯(RPS)氯化聚乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描量热计（DSC）研究了单基、双基和三基药热分解能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光谱、光电子能谱、差热分析、核磁共振、X射线衍射等方法对聚硅氧改丙烯酸酯共聚物的结构和能进行了研究。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差热分析和热重分析对储氢材料的放氢温度和放氢量进行了测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、热台、扫描电镜以及偏光显微镜等研究了PA6-PEG嵌段共聚物的结晶能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手段，研究了乙烯共聚单体含量的变化对VERSIFY共聚物结晶能、能和粘弹能的影响。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速等手段研究了UHMWPE熔纺丝在超拉伸过程中结构能的变化。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研究采用DSC和热膨胀仪对两种石英砂的原砂和焙烧砂在加热过程中的相变和热膨胀进行了分析。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法含恶唑啉官能团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用示扫描量计（DSC）单基、双基和三基药分解性能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光、光电子能、分析、核磁共振、X射线衍射等方法对聚硅氧改性丙烯酸酯共聚物的结构和性能进行。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用分析和重分析对储氢材料的放氢温度和放氢量进行测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、台、扫描电镜以及偏光显微镜等PA6-PEG嵌段共聚物的结晶性能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手段，乙烯共聚单体含量的变化对VERSIFY共聚物结晶性能、力学性能和粘弹性能的影响。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、分析（DSC）、广角X射线衍射（WAXD）、声速等手段UHMWPE熔纺丝在超拉伸过程中结构性能的变化。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本采用DSC和膨胀仪对两种石英砂的原砂和焙烧砂在加过程中的相变和膨胀进行分析。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法研究了含恶唑啉官团聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描量热计（DSC）研究了单基、双基和三基药热分解性。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光谱、光电子谱、差热分析、核磁共振、X射线衍射等方法对聚硅氧改性丙烯酸酯共聚物结构和性进行了研究。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差热分析和热重分析对储氢材料放氢温度和放氢量进行了测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、热台、扫描电镜以及偏光显微镜等研究了PA6-PEG嵌段共聚物结晶性。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手段，研究了乙烯共聚单体含量变化对VERSIFY共聚物结晶性、力学性和粘弹性响。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速等手段研究了UHMWPE熔纺丝在超拉伸过程中结构性变化。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研究采用DSC和热膨胀仪对两种石英砂原砂和焙烧砂在加热过程中相变和热膨胀进行了分析。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化物红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化物红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法研究了含恶唑啉官团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描量热计（DSC）研究了单基、双基和三基药热分解。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光谱、光电子谱、差热分析、核磁共振、X射线衍射等方法对聚硅氧改丙烯酸酯共聚物的结构和进行了研究。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差热分析和热重分析对储氢材料的放氢温度和放氢量进行了测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、热台、扫描电镜以及偏光显微镜等研究了PA6-PEG嵌段共聚物的结晶。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手段，研究了乙烯共聚单体含量的变化对VERSIFY共聚物结晶、学和粘弹的影响。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速等手段研究了UHMWPE熔纺丝在超拉伸过程结构的变化。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本研究采用DSC和热膨胀仪对两种石英砂的原砂和焙烧砂在加热过程的相变和热膨胀进行了分析。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。

The reaction between polystyrene having oxazoline groups(RPS) and chlorinated polyethylene(CPE) was investigated by FTIR, DSC methods.

用FTIR、DSC等方法含恶唑啉官能团的聚苯乙烯(RPS)与氯化聚乙烯(CPE)之间的反应。

The thermal decomposition of single, double-and triple-base nitroguanidine propellants was studied by differential scanning calorimetry (DSC).

用差示扫描热计（DSC）单基、双基和三基药热分解性能。

The structure and properties of polyorganosiloxane-acrylate emulsion copolymer were investigated by IR, XPS, DSC, 1H-NMR, WAXD.

利用红外光谱、光电子能谱、差热分析、核磁共振、X射线衍射等方法对聚硅氧改性丙烯酸酯共聚物的结构和性能行。

The dehydriding temperature and dehydriding capacity were evaluated by differential scanning calorimeter (DSC) and thermogravimetric analysis (TG).

运用差热分析和热重分析对储材料的放温度和放行测试。

The crystallization porperty of polycaprolactam(PA6)-polyethylene glycol(PEG)block copolymer wasinvestigated by means of electron microscope,x-ray diffraction,DSC and hot stage polarized microscope.

应用DSC、热台、扫描电镜以及偏光显微镜等PA6-PEG嵌段共聚物的结晶性能。

The effect of ethylene comonomer content on the crystallization, mechanical and viscoelastic properties of VERSIFY copolymers was studied by DSC, DMTA, POM and WAXD.

通过DSC，DMTA，POM和WAXD等手段，乙烯共聚单体含的变化对VERSIFY共聚物结晶性能、力学性能和粘弹性能的影响。

The changing of the structure and properties of UHMWPE fibres during super drawing were studied by means of SEM, DSC, WAXD and sound pulsimeter.

还借助扫描电子显微镜（SEM）、热分析（DSC）、广角X射线衍射（WAXD）、声速等手段UHMWPE熔纺丝在超拉伸过程中结构性能的变化。

During heating,phase transformation and expansibility of the new quartz sands and the calcined Quartz sands from two places were determined by DSC and thermodilatometry.

本采用DSC和热膨胀仪对两种石英砂的原砂和焙烧砂在加热过程中的相变和热膨胀行分析。

Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

Abstract： Using lead benzoxy as curing agent,cured epoxy resin was analyzed by means of IR spectrum and DSC curves.Lead benzoxy was considered to be catalytic curing agent.

摘 要： 采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。

The photographs of polarizing microscope showed the number of spherocrystal was increased and the diameter was decreased after saponification reaction which was agreed with the studies of DSC.

试样的偏光显微镜观察结果表明，醇解后，球晶数目增加、直径减小、完善程度降低。