This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性以及碳钢萘间的相容性进行实研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和防腐要求,不注明表示均按碳钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增碳工艺,转炉炼出合格的高碳钢。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本对萘的热稳定性以及碳钢萘间的相容性进行实
研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝工艺和镀铝层组特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和防腐要求,不注明表示均按碳钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增碳工艺,转炉能够冶炼出合格的高碳钢。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性以及碳钢萘间的相容性进行实研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和防腐要求,不注明表示均按碳钢和普防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
“
拉补吹”、炉后增碳工艺,转炉能够冶炼出合格的
碳钢。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性以及碳钢萘间的相容性进行实研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和要求,不注明表示均按碳钢和普通
货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增碳工艺,转炉能够冶炼出合格的高碳钢。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
文着重对萘的热稳定性以及碳钢萘间的相容性进行实
研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝工艺和镀铝层组织结构。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
别注明刮砂机、耙砂机的材质和防腐要求,不注明表示均按碳钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增碳工艺,转炉能够冶炼出合格的高碳钢。
声明:以上例句、词性类均由互联网资源自动生成,部
未经过人工审核,其表达内容亦不代表
软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性以及碳钢萘间的相容性进行实研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和防腐要求,不注明表示均按碳钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、后增碳工艺,
够冶炼出合格的高碳钢。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低碳钢增碳原因措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性以碳钢萘间的相容性进行实
研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分刮砂机、耙砂机的材质和防腐要求,不
表示均按碳钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增碳工艺,转炉能够冶炼出合格的高碳钢。
声:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性以及碳钢萘间的相容性进行实.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍碳钢表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别刮砂机、耙砂机的材质和防腐要求,
表示均按碳钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增碳工艺,转炉能够冶炼出合格的高碳钢。
声:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦
代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低钢增
原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性以及钢萘间的相容性进行实
研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了钢表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和防腐要求,不注明表示钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、炉后增工艺,转炉能够冶炼出合格的高
钢。
声明:以上、词性分类
由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
This article mainly researches on the causes and controlling of ultra-low carbon steel carburetion.
重点研究了鞍钢二炼钢厂超低碳钢增碳原因及控制措施。
This paper studied emphatically the heat steadiness of naphthaline and compatibility of naphthaline with carbon steel.
本文着重对萘的热稳定性以及碳钢萘间的相容性进行实研究.
Al dip calorizing of carbon steel and structure and properties of surface layer of aluminized steel were described.
介绍了碳钢表面热浸镀铝工艺和镀铝层组织结构特征。
Note the material and anticorrosion requirements of Sand Scraper, Harrower, Otherwise supplied according to carbon steel with normal anticorrosion.
分别注明刮砂机、耙砂机的材质和防腐要求,不注明表示均按碳钢和普通防腐订货。
By way of “raising high carbon content and post blowing” as well as recarburization practice can the high carbon steel of fine quality be refined in the converter.
通过“高拉补吹”、后增碳工艺,转
冶炼出合格的高碳钢。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。