A simultaneously potentiometric titration method for determining benzaldehyde and benzoic acid in electrosynthesis products was reported.

采用电位滴定法测定苯电合成产物中的苯和苯,究了盐羟胺用量、苯醇和苯含量对测定的影响。

The results showed that the main product was benzaldehyde and a little by-products were styrene oxide and phenylacetaldehyde.

发现该工艺中主要生成苯，少量副产物是环氧苯乙烷和苯乙等。

The catalytic hydrolysis of benzal chloride and benzyl chloride mixture was studied, benzal chloride forming benzaldehyde in 95% yield, while the benzyl choride unreacted.

究了亚苄基二氯和苄基氯混合物的催化应，亚苄基二氯率达95％，而苄基氯不发生化学应。

The effects of reactant ratio, reaction time, catalyst amount,the species and amount of deaquation reagent on the yield of benzaldehyde 1,3-butanediol acetal were investigated.

对苯与1,3-丁二醇在钒磷氧催化剂作用下的缩化应进行了究,考察了醇比、应时间、催化剂用量、带剂种类和体积等因素对苯1,3-丁二醇缩收率的影响。

Benzaldehyde and acetone used as materials,the benzylidene acetone is synthesized in the presence of potassium fluoride on alumina.

以苯和丙酮为原料,氟化钾氧化铝作催化剂合成了苄叉丙酮。

A simultaneously potentiometric titration method for determining benzaldehyde and benzoic acid in electrosynthesis products was reported.

采用电位滴定法测定甲苯电合成产物中苯甲和苯甲酸,研究了盐酸羟胺用量、苯甲醇和甲苯含量对测定影响。

The results showed that the main product was benzaldehyde and a little by-products were styrene oxide and phenylacetaldehyde.

发现该工艺中主要生成苯甲，少量副产物是环氧苯乙烷和苯乙等。

The catalytic hydrolysis of benzal chloride and benzyl chloride mixture was studied, benzal chloride forming benzaldehyde in 95% yield, while the benzyl choride unreacted.

研究了亚苄基二氯和苄基氯混合物催化水解反应，亚苄基二氯水解率达95％，而苄基氯不发生化学反应。

The effects of reactant ratio, reaction time, catalyst amount,the species and amount of deaquation reagent on the yield of benzaldehyde 1,3-butanediol acetal were investigated.

对苯甲与1,3-丁二醇在钒磷氧催化剂作用化反应进行了研究,考察了醇比、反应时间、催化剂用量、带水剂种类和体积等因素对苯甲1,3-丁二醇收率影响。

Benzaldehyde and acetone used as materials,the benzylidene acetone is synthesized in the presence of potassium fluoride on alumina.

以苯甲和丙酮为原料,氟化钾氧化铝作催化剂合成了苄叉丙酮。

A simultaneously potentiometric titration method for determining benzaldehyde and benzoic acid in electrosynthesis products was reported.

采用电位滴定法测定苯电合成产物中的苯苯酸,研究了盐酸羟胺用量、苯苯含量对测定的影响。

The results showed that the main product was benzaldehyde and a little by-products were styrene oxide and phenylacetaldehyde.

发现该工艺中主要生成苯，少量副产物是环氧苯乙烷苯乙等。

The catalytic hydrolysis of benzal chloride and benzyl chloride mixture was studied, benzal chloride forming benzaldehyde in 95% yield, while the benzyl choride unreacted.

研究了亚苄苄混合物的催化水解反应，亚苄水解率达95％，而苄不发生化学反应。

The effects of reactant ratio, reaction time, catalyst amount,the species and amount of deaquation reagent on the yield of benzaldehyde 1,3-butanediol acetal were investigated.

对苯与1,3-丁在钒磷氧催化剂作用下的缩化反应进行了研究,考察了比、反应时间、催化剂用量、带水剂种类体积等因素对苯1,3-丁缩收率的影响。

Benzaldehyde and acetone used as materials,the benzylidene acetone is synthesized in the presence of potassium fluoride on alumina.

以苯丙酮为原料,氟化钾氧化铝作催化剂合成了苄叉丙酮。

A simultaneously potentiometric titration method for determining benzaldehyde and benzoic acid in electrosynthesis products was reported.

采用电位滴法甲苯电合成产物中的苯甲和苯甲酸,了盐酸羟胺用量、苯甲醇和甲苯含量的影响。

The results showed that the main product was benzaldehyde and a little by-products were styrene oxide and phenylacetaldehyde.

发现该工艺中主要生成苯甲，少量副产物是环氧苯乙烷和苯乙。

The catalytic hydrolysis of benzal chloride and benzyl chloride mixture was studied, benzal chloride forming benzaldehyde in 95% yield, while the benzyl choride unreacted.

了亚苄基二氯和苄基氯混合物的催化水解反应，亚苄基二氯水解率达95％，而苄基氯不发生化学反应。

The effects of reactant ratio, reaction time, catalyst amount,the species and amount of deaquation reagent on the yield of benzaldehyde 1,3-butanediol acetal were investigated.

苯甲与1,3-丁二醇在钒磷氧催化剂作用下的缩化反应进行了,考察了醇比、反应时间、催化剂用量、带水剂种类和体积因素苯甲1,3-丁二醇缩收率的影响。

Benzaldehyde and acetone used as materials,the benzylidene acetone is synthesized in the presence of potassium fluoride on alumina.

以苯甲和丙酮为原料,氟化钾氧化铝作催化剂合成了苄叉丙酮。

A simultaneously potentiometric titration method for determining benzaldehyde and benzoic acid in electrosynthesis products was reported.

采用电位滴定法测定甲苯电成产中苯甲和苯甲,研究了胺用量、苯甲醇和甲苯含量对测定影响。

The results showed that the main product was benzaldehyde and a little by-products were styrene oxide and phenylacetaldehyde.

发现该工艺中主要生成苯甲，少量副产是环氧苯乙烷和苯乙等。

The catalytic hydrolysis of benzal chloride and benzyl chloride mixture was studied, benzal chloride forming benzaldehyde in 95% yield, while the benzyl choride unreacted.

研究了亚苄基二氯和苄基氯混催化水解反应，亚苄基二氯水解率达95％，而苄基氯不发生化学反应。

The effects of reactant ratio, reaction time, catalyst amount,the species and amount of deaquation reagent on the yield of benzaldehyde 1,3-butanediol acetal were investigated.

对苯甲与1,3-丁二醇在钒磷氧催化剂作用下缩化反应进行了研究,考察了醇比、反应时间、催化剂用量、带水剂种类和体积等因素对苯甲1,3-丁二醇缩收率影响。

Benzaldehyde and acetone used as materials,the benzylidene acetone is synthesized in the presence of potassium fluoride on alumina.

以苯甲和丙酮为原料,氟化钾氧化铝作催化剂成了苄叉丙酮。

A simultaneously potentiometric titration method for determining benzaldehyde and benzoic acid in electrosynthesis products was reported.

用电位滴定法测定电合成产物中的和酸,研究了盐酸羟胺用量、醇和含量对测定的影响。

The results showed that the main product was benzaldehyde and a little by-products were styrene oxide and phenylacetaldehyde.

发现该工艺中主要生成，少量副产物是环氧乙烷和乙等。

The catalytic hydrolysis of benzal chloride and benzyl chloride mixture was studied, benzal chloride forming benzaldehyde in 95% yield, while the benzyl choride unreacted.

研究了亚苄基二氯和苄基氯混合物的催化水解反应，亚苄基二氯水解率达95％，而苄基氯不发生化学反应。

The effects of reactant ratio, reaction time, catalyst amount,the species and amount of deaquation reagent on the yield of benzaldehyde 1,3-butanediol acetal were investigated.

对与1,3-丁二醇在钒磷氧催化剂作用下的缩化反应进行了研究,考察了醇比、反应时间、催化剂用量、带水剂种类和体积等因素对1,3-丁二醇缩收率的影响。

Benzaldehyde and acetone used as materials,the benzylidene acetone is synthesized in the presence of potassium fluoride on alumina.

以和丙酮为原料,氟化钾氧化铝作催化剂合成了苄叉丙酮。

A simultaneously potentiometric titration method for determining benzaldehyde and benzoic acid in electrosynthesis products was reported.

采用位滴定法测定合成产物中的和酸,研究了盐酸羟胺用量、醇和含量对测定的影响。

The results showed that the main product was benzaldehyde and a little by-products were styrene oxide and phenylacetaldehyde.

发现该工艺中主要生成，少量副产物是环氧乙烷和乙等。

The catalytic hydrolysis of benzal chloride and benzyl chloride mixture was studied, benzal chloride forming benzaldehyde in 95% yield, while the benzyl choride unreacted.

研究了亚二和混合物的催化水解反应，亚二水解率达95％，而不发生化学反应。

The effects of reactant ratio, reaction time, catalyst amount,the species and amount of deaquation reagent on the yield of benzaldehyde 1,3-butanediol acetal were investigated.

对与1,3-丁二醇在钒磷氧催化剂作用下的缩化反应进行了研究,考察了醇比、反应时间、催化剂用量、带水剂种类和体积等因素对1,3-丁二醇缩收率的影响。

Benzaldehyde and acetone used as materials,the benzylidene acetone is synthesized in the presence of potassium fluoride on alumina.

以和丙酮为原料,氟化钾氧化铝作催化剂合成了叉丙酮。

A simultaneously potentiometric titration method for determining benzaldehyde and benzoic acid in electrosynthesis products was reported.

采用电位滴定法测定甲苯电合成产物中的苯甲和苯甲酸,盐酸羟胺用量、苯甲醇和甲苯含量对测定的影响。

The results showed that the main product was benzaldehyde and a little by-products were styrene oxide and phenylacetaldehyde.

发现该工艺中主要生成苯甲，少量副产物是环氧苯乙烷和苯乙等。

The catalytic hydrolysis of benzal chloride and benzyl chloride mixture was studied, benzal chloride forming benzaldehyde in 95% yield, while the benzyl choride unreacted.

亚苄基二氯和苄基氯混合物的解反应，亚苄基二氯解率达95％，而苄基氯不发生学反应。

The effects of reactant ratio, reaction time, catalyst amount,the species and amount of deaquation reagent on the yield of benzaldehyde 1,3-butanediol acetal were investigated.

对苯甲与1,3-丁二醇在钒磷氧剂作用下的缩反应进行,考察醇比、反应时间、剂用量、带剂种类和体积等因素对苯甲1,3-丁二醇缩收率的影响。

Benzaldehyde and acetone used as materials,the benzylidene acetone is synthesized in the presence of potassium fluoride on alumina.

以苯甲和丙酮为原料,氟钾氧铝作剂合成苄叉丙酮。

A simultaneously potentiometric titration method for determining benzaldehyde and benzoic acid in electrosynthesis products was reported.

采用电位滴法测电合成产物中的和酸,研究了盐酸羟胺用量、醇和含量对测的影响。

The results showed that the main product was benzaldehyde and a little by-products were styrene oxide and phenylacetaldehyde.

发现该工艺中主要生成，少量副产物是环氧乙烷和乙等。

The catalytic hydrolysis of benzal chloride and benzyl chloride mixture was studied, benzal chloride forming benzaldehyde in 95% yield, while the benzyl choride unreacted.

研究了亚苄二和苄混合物的催化水解反应，亚苄二水解率达95％，而苄发生化学反应。

The effects of reactant ratio, reaction time, catalyst amount,the species and amount of deaquation reagent on the yield of benzaldehyde 1,3-butanediol acetal were investigated.

对与1,3-丁二醇在钒磷氧催化剂作用下的缩化反应进行了研究,考察了醇比、反应时间、催化剂用量、带水剂种类和体积等因素对1,3-丁二醇缩收率的影响。

Benzaldehyde and acetone used as materials,the benzylidene acetone is synthesized in the presence of potassium fluoride on alumina.

以和丙酮为原料,氟化钾氧化铝作催化剂合成了苄叉丙酮。