The sailors are bending to the oars.

水手们在拼命地划桨。

Rheumatism prevents him form bending his back.

风湿病使他不能腰。

He is bending down to tie his shoelaces.

他正下腰系鞋带。

We have succeeded in bending the thick steel plates.

们终于把这些厚钢板弄了。

The sun’s gravitation was bending the beam of light.

太阳的引力使光束曲。

The induced bending moment may lead to destructibility of the pipeline.

矩的产生可能导致管线的破坏。

Max has been bending my ear all night about his job.

马克斯一晚上都在谈特谈他的工作。

Be careful of bending that spoon.

当心别把汤匙弄。

Ovalisation at maximum bending strain in the small scale reeling tests was not measured.

在小型的卷轴测试中基于最曲应变的成椭圆形是没有规则的。

Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.

截面畸变是薄壁管小曲半径数控曲成形容易出现的成形缺陷之一。

A young man was bending low to push a heavily loaded barrow up a slope.

一个年轻人正弓着背把一辆重载的小车推上斜坡。

The combination of bending and overblowing technique makes it true to play all the semitones on a diatonic harmonca.

压音和超吹技术的结合使得在一把口琴上演奏所有的小调梦想成真。

In the end he admitted bending the truth. He had done some of his essay, but he hadn’t finished it.

最后他承认说的不完全是实话，他的文章是写了一部份，不过还没有完成。

Currently, the products consist of toughened glass, interlayer glass, bulletproof glass, pickproof glass, fireproof glass, hollow glass and hot bending glass.

产品有钢化玻璃，夹层玻璃，防弹防盗玻璃，防火玻璃，中空及热玻璃。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压三道工序一次成形的模具。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕，盘环，铣槽，倒角，包覆，双翦，点焊，冲齿，辊压，盘根编织。

The tarsal joint of the hind leg of a digitigrade quadruped, such as a horse, corresponding to the human ankle but bending in the opposite direction.

穿在脚上的一种遮盖物（踝以下），它包括由皮革或塑胶做的柔软的鞋帮与由较硬的材料做的鞋底和鞋帮组成。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素渗水砖的渗水速度和强度的影响进行了探讨。

Heat treatment and pre-strain, tensile test of the material and four point bending test have been carried to obtain the mechanical property of the undegraded and degraded material at low temperature.

本文首先通过分析复合脆化处理实验、拉伸实验和缺口试件四点曲实验的结果，考察比较某核压力容器钢在脆化处理前后的室温和低温力学性能。

The sailors are bending to the oars.

水手们在拼命地划桨。

Rheumatism prevents him form bending his back.

风湿病使他不能腰。

He is bending down to tie his shoelaces.

他正下腰系鞋带。

We have succeeded in bending the thick steel plates.

我们终于把这些厚钢板弄了。

The sun’s gravitation was bending the beam of light.

太阳引使光束。

The induced bending moment may lead to destructibility of the pipeline.

矩产生可能导致管线破坏。

Max has been bending my ear all night about his job.

马克斯一晚上都在对我大谈特谈他。

Be careful of bending that spoon.

当心别把汤匙弄。

Ovalisation at maximum bending strain in the small scale reeling tests was not measured.

在小型卷轴测试中基于最大应变成椭圆形是没有规则。

Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.

截面畸变是薄壁管小半径数控成形容易出现成形缺陷之一。

A young man was bending low to push a heavily loaded barrow up a slope.

一个年轻人正弓着背把一辆重载小车推上斜坡。

The combination of bending and overblowing technique makes it true to play all the semitones on a diatonic harmonca.

压音和超吹技术结合使得在一把口琴上演奏所有大小调梦想成真。

In the end he admitted bending the truth. He had done some of his essay, but he hadn’t finished it.

最后他承认说不完全是实话，他文章是写了一部份，不过还没有完成。

Currently, the products consist of toughened glass, interlayer glass, bulletproof glass, pickproof glass, fireproof glass, hollow glass and hot bending glass.

产品有钢化玻璃，夹层玻璃，防弹防盗玻璃，防火玻璃，中空及热玻璃。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件艺特点,确定了合理艺方案,设计1副落料、冲孔、压三道序一次成形模具。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根具，盘根切割具，垫片切割具，缠绕机，盘环机，铣槽机，倒角机，包覆机，双翦机，点焊机，冲齿机，辊压机，盘根编织机。

The tarsal joint of the hind leg of a digitigrade quadruped, such as a horse, corresponding to the human ankle but bending in the opposite direction.

穿在脚上一种遮盖物（踝以下），它包括由皮革或塑胶做柔软鞋帮与由较硬材料做鞋底和鞋帮组成。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压、骨料粒径、保温时间、烧成温度等因素对渗水砖渗水速度和强度影响进行了探讨。

Heat treatment and pre-strain, tensile test of the material and four point bending test have been carried to obtain the mechanical property of the undegraded and degraded material at low temperature.

本文首先通过分析复合脆化处理实验、拉伸实验和缺口试件四点实验结果，考察比较某核压容器钢在脆化处理前后室温和低温学性能。

The sailors are bending to the oars.

水手们在拼命地划桨。

Rheumatism prevents him form bending his back.

风湿病使他不能腰。

He is bending down to tie his shoelaces.

他正下腰系鞋带。

We have succeeded in bending the thick steel plates.

我们终于把这些厚钢板弄了。

The sun’s gravitation was bending the beam of light.

太阳引力使光束曲。

The induced bending moment may lead to destructibility of the pipeline.

矩产生可能导致管线破坏。

Max has been bending my ear all night about his job.

马克斯一晚上都在对我大谈特谈他工作。

Be careful of bending that spoon.

当心别把汤匙弄。

Ovalisation at maximum bending strain in the small scale reeling tests was not measured.

在小型卷轴测试中基于最大曲应变成椭圆形是没有规则。

Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.

畸变是薄壁管小曲半径数控曲成形容易出现成形缺陷之一。

A young man was bending low to push a heavily loaded barrow up a slope.

一个年轻人正弓着背把一辆重载小车推上斜坡。

The combination of bending and overblowing technique makes it true to play all the semitones on a diatonic harmonca.

压音和超吹技术结合使得在一把口琴上演奏所有大小调梦想成真。

In the end he admitted bending the truth. He had done some of his essay, but he hadn’t finished it.

最后他承认说不完全是实话，他文章是写了一部份，不过还没有完成。

Currently, the products consist of toughened glass, interlayer glass, bulletproof glass, pickproof glass, fireproof glass, hollow glass and hot bending glass.

产品有钢化玻璃，夹层玻璃，防弹防盗玻璃，防火玻璃，中空及热玻璃。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理工艺方案,设计1副落料、冲孔、压三道工序一次成形模具。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，双翦机，点焊机，冲齿机，辊压机，盘根编织机。

The tarsal joint of the hind leg of a digitigrade quadruped, such as a horse, corresponding to the human ankle but bending in the opposite direction.

穿在脚上一种遮盖物（踝以下），它包括由皮革或塑胶做柔软鞋帮与由较硬材料做鞋底和鞋帮组成。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖渗水速度和强度影响进行了探讨。

Heat treatment and pre-strain, tensile test of the material and four point bending test have been carried to obtain the mechanical property of the undegraded and degraded material at low temperature.

本文首先通过分析复合脆化处理实验、实验和缺口试件四点曲实验结果，考察比较某核压力容器钢在脆化处理前后室温和低温力学性能。

The sailors are bending to the oars.

水手们拼命地划桨。

Rheumatism prevents him form bending his back.

风湿病使他不能腰。

He is bending down to tie his shoelaces.

他正下腰系鞋带。

We have succeeded in bending the thick steel plates.

我们终于把这些厚钢板弄了。

The sun’s gravitation was bending the beam of light.

太阳的引力使光束。

The induced bending moment may lead to destructibility of the pipeline.

矩的产生可能导致管线的破坏。

Max has been bending my ear all night about his job.

马克斯一晚上都对我大谈特谈他的工作。

Be careful of bending that spoon.

当心别把汤匙弄。

Ovalisation at maximum bending strain in the small scale reeling tests was not measured.

的卷轴测试中基于最大应变的成椭圆形是没有规则的。

Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.

截面畸变是薄壁管半径数控成形容易出现的成形缺陷之一。

A young man was bending low to push a heavily loaded barrow up a slope.

一个年轻人正弓着背把一辆重载的车推上斜坡。

The combination of bending and overblowing technique makes it true to play all the semitones on a diatonic harmonca.

压音和超吹技术的结合使得一把口琴上演奏所有的大调梦想成真。

In the end he admitted bending the truth. He had done some of his essay, but he hadn’t finished it.

最后他承认说的不完全是实话，他的文章是写了一部份，不过还没有完成。

Currently, the products consist of toughened glass, interlayer glass, bulletproof glass, pickproof glass, fireproof glass, hollow glass and hot bending glass.

产品有钢化玻璃，夹层玻璃，防弹防盗玻璃，防火玻璃，中空及热玻璃。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压三道工序一次成形的模具。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，双翦机，点焊机，冲齿机，辊压机，盘根编织机。

The tarsal joint of the hind leg of a digitigrade quadruped, such as a horse, corresponding to the human ankle but bending in the opposite direction.

穿脚上的一种遮盖物（踝以下），它包括由皮革或塑胶做的柔软的鞋帮与由较硬的材料做的鞋底和鞋帮组成。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度和强度的影响进行了探讨。

Heat treatment and pre-strain, tensile test of the material and four point bending test have been carried to obtain the mechanical property of the undegraded and degraded material at low temperature.

本文首先通过分析复合脆化处理实验、拉伸实验和缺口试件四点实验的结果，考察比较某核压力容器钢脆化处理前后的室温和低温力学性能。

The sailors are bending to the oars.

水手们在拼命地划桨。

Rheumatism prevents him form bending his back.

风湿病使他不能腰。

He is bending down to tie his shoelaces.

他正下腰系鞋带。

We have succeeded in bending the thick steel plates.

我们终于这些厚钢板弄了。

The sun’s gravitation was bending the beam of light.

太阳引力使光束。

The induced bending moment may lead to destructibility of the pipeline.

矩产生可能导致管线破坏。

Max has been bending my ear all night about his job.

马克斯晚上都在对我大谈特谈他工作。

Be careful of bending that spoon.

当心别汤匙弄。

Ovalisation at maximum bending strain in the small scale reeling tests was not measured.

在小型卷轴测试中基于最大应变成椭圆形是没有规则。

Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.

截面畸变是薄壁管小半径数控成形容易出现成形缺陷之。

A young man was bending low to push a heavily loaded barrow up a slope.

个年轻人正弓着背重载小车推上斜坡。

The combination of bending and overblowing technique makes it true to play all the semitones on a diatonic harmonca.

压音和超吹技术结合使得在口琴上演奏所有大小调梦想成真。

In the end he admitted bending the truth. He had done some of his essay, but he hadn’t finished it.

最后他承认说不完全是实话，他文章是写了部份，不过还没有完成。

Currently, the products consist of toughened glass, interlayer glass, bulletproof glass, pickproof glass, fireproof glass, hollow glass and hot bending glass.

产品有钢化玻璃，夹层玻璃，防弹防盗玻璃，防火玻璃，中空及热玻璃。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理工艺方案,设计1副落料、冲孔、压三道工序次成形模具。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，双翦机，点焊机，冲齿机，辊压机，盘根编织机。

The tarsal joint of the hind leg of a digitigrade quadruped, such as a horse, corresponding to the human ankle but bending in the opposite direction.

穿在脚上种遮盖物（踝以下），它包括由皮革或塑胶做柔软鞋帮与由较硬材料做鞋底和鞋帮组成。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖渗水速度和强度影响进行了探讨。

Heat treatment and pre-strain, tensile test of the material and four point bending test have been carried to obtain the mechanical property of the undegraded and degraded material at low temperature.

本文首先通过分析复合脆化处理实验、拉伸实验和缺口试件四点实验结果，考察比较某核压力容器钢在脆化处理前后室温和低温力学性能。

The sailors are bending to the oars.

水手们在拼命地划桨。

Rheumatism prevents him form bending his back.

风湿病使他不能腰。

He is bending down to tie his shoelaces.

他正下腰系鞋带。

We have succeeded in bending the thick steel plates.

我们终于把这些厚钢板弄了。

The sun’s gravitation was bending the beam of light.

太阳的引力使光束曲。

The induced bending moment may lead to destructibility of the pipeline.

矩的产生可能导致管线的破。

Max has been bending my ear all night about his job.

斯一晚上都在对我大谈特谈他的工作。

Be careful of bending that spoon.

当心别把汤匙弄。

Ovalisation at maximum bending strain in the small scale reeling tests was not measured.

在小型的卷轴测试中基于最大曲应变的成椭圆形是没有规则的。

Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.

截面畸变是薄壁管小曲数控曲成形容易出现的成形缺陷之一。

A young man was bending low to push a heavily loaded barrow up a slope.

一个年轻人正弓着背把一辆重载的小车推上斜坡。

The combination of bending and overblowing technique makes it true to play all the semitones on a diatonic harmonca.

压音和超吹技术的结合使得在一把口琴上演奏所有的大小调梦想成真。

In the end he admitted bending the truth. He had done some of his essay, but he hadn’t finished it.

最后他承认说的不完全是实话，他的文章是写了一部份，不过还没有完成。

Currently, the products consist of toughened glass, interlayer glass, bulletproof glass, pickproof glass, fireproof glass, hollow glass and hot bending glass.

产品有钢化玻璃，夹层玻璃，防弹防盗玻璃，防火玻璃，中空及热玻璃。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压三道工序一次成形的模具。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，双翦机，点焊机，冲齿机，辊压机，盘根编织机。

The tarsal joint of the hind leg of a digitigrade quadruped, such as a horse, corresponding to the human ankle but bending in the opposite direction.

穿在脚上的一种遮盖物（踝以下），它包括由皮革或塑胶做的柔软的鞋帮与由较硬的材料做的鞋底和鞋帮组成。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒、保温时间、烧成温度等因素对渗水砖的渗水速度和强度的影响进行了探讨。

Heat treatment and pre-strain, tensile test of the material and four point bending test have been carried to obtain the mechanical property of the undegraded and degraded material at low temperature.

本文首先通过分析复合脆化处理实验、拉伸实验和缺口试件四点曲实验的结果，考察比较某核压力容器钢在脆化处理前后的室温和低温力学性能。

The sailors are bending to the oars.

水手们在拼命地划桨。

Rheumatism prevents him form bending his back.

风湿病使他不能腰。

He is bending down to tie his shoelaces.

他下腰系鞋带。

We have succeeded in bending the thick steel plates.

我们终于把这些厚钢板弄了。

The sun’s gravitation was bending the beam of light.

太阳的引力使光束曲。

The induced bending moment may lead to destructibility of the pipeline.

矩的产生可能导致管线的破坏。

Max has been bending my ear all night about his job.

马克斯一晚上都在对我大谈特谈他的工作。

Be careful of bending that spoon.

当心别把汤匙弄。

Ovalisation at maximum bending strain in the small scale reeling tests was not measured.

在小型的卷轴测试中基于最大曲应变的成椭圆形是没有规则的。

Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.

截面畸变是薄壁管小曲半径数控曲成形容易出现的成形缺陷之一。

A young man was bending low to push a heavily loaded barrow up a slope.

一个年轻人背把一辆重载的小车推上斜坡。

The combination of bending and overblowing technique makes it true to play all the semitones on a diatonic harmonca.

压音和超吹技术的结合使得在一把口琴上演奏所有的大小调梦想成真。

In the end he admitted bending the truth. He had done some of his essay, but he hadn’t finished it.

最后他承认说的不完全是实话，他的文章是写了一部份，不过还没有完成。

Currently, the products consist of toughened glass, interlayer glass, bulletproof glass, pickproof glass, fireproof glass, hollow glass and hot bending glass.

产品有钢化玻璃，夹层玻璃，防弹防盗玻璃，防火玻璃，中空及热玻璃。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压三道工序一次成形的模具。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，双翦机，点焊机，冲齿机，辊压机，盘根编织机。

The tarsal joint of the hind leg of a digitigrade quadruped, such as a horse, corresponding to the human ankle but bending in the opposite direction.

穿在脚上的一种遮盖物（踝以下），它包括由皮革或塑胶做的柔软的鞋帮与由较硬的材料做的鞋底和鞋帮组成。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度和强度的影响进行了探讨。

Heat treatment and pre-strain, tensile test of the material and four point bending test have been carried to obtain the mechanical property of the undegraded and degraded material at low temperature.

本文首先通过分析复合脆化处理实验、拉伸实验和缺口试件四点曲实验的结果，考察比较某核压力容器钢在脆化处理前后的室温和低温力学性能。

The sailors are bending to the oars.

水手们在拼命地划桨。

Rheumatism prevents him form bending his back.

风湿病使他不能腰。

He is bending down to tie his shoelaces.

他正下腰系鞋带。

We have succeeded in bending the thick steel plates.

我们终于把这些厚钢板弄了。

The sun’s gravitation was bending the beam of light.

太阳引力使光束曲。

The induced bending moment may lead to destructibility of the pipeline.

矩产生可能导致管线破坏。

Max has been bending my ear all night about his job.

马克斯一晚上都在对我大谈特谈他工作。

Be careful of bending that spoon.

当心别把汤匙弄。

Ovalisation at maximum bending strain in the small scale reeling tests was not measured.

在小型卷轴测试中基于最大曲应成椭圆形是没有规。

Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.

面畸是薄壁管小曲半径数控曲成形容易出现成形缺陷之一。

A young man was bending low to push a heavily loaded barrow up a slope.

一个年轻人正弓着背把一辆重载小车推上斜坡。

The combination of bending and overblowing technique makes it true to play all the semitones on a diatonic harmonca.

压音和超吹技术结合使得在一把口琴上演奏所有大小调梦想成真。

In the end he admitted bending the truth. He had done some of his essay, but he hadn’t finished it.

最后他承认说不完全是实话，他文章是写了一部份，不过还没有完成。

Currently, the products consist of toughened glass, interlayer glass, bulletproof glass, pickproof glass, fireproof glass, hollow glass and hot bending glass.

产品有钢化玻璃，夹层玻璃，防弹防盗玻璃，防火玻璃，中空及热玻璃。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理工艺方案,设计1副落料、冲孔、压三道工序一次成形模具。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，双翦机，点焊机，冲齿机，辊压机，盘根编织机。

The tarsal joint of the hind leg of a digitigrade quadruped, such as a horse, corresponding to the human ankle but bending in the opposite direction.

穿在脚上一种遮盖物（踝以下），它包括由皮革或塑胶做柔软鞋帮与由较硬材料做鞋底和鞋帮组成。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖渗水速度和强度影响进行了探讨。

Heat treatment and pre-strain, tensile test of the material and four point bending test have been carried to obtain the mechanical property of the undegraded and degraded material at low temperature.

本文首先通过分析复合脆化处理实验、实验和缺口试件四点曲实验结果，考察比较某核压力容器钢在脆化处理前后室温和低温力学性能。

The sailors are bending to the oars.

水手们在拼命地划桨。

Rheumatism prevents him form bending his back.

风湿病使他不能腰。

He is bending down to tie his shoelaces.

他下腰系鞋带。

We have succeeded in bending the thick steel plates.

我们终于把这些厚钢板弄了。

The sun’s gravitation was bending the beam of light.

太阳的引力使光束曲。

The induced bending moment may lead to destructibility of the pipeline.

矩的产生可能导致管线的破坏。

Max has been bending my ear all night about his job.

马克斯一晚上都在对我大谈特谈他的工作。

Be careful of bending that spoon.

当心别把汤匙弄。

Ovalisation at maximum bending strain in the small scale reeling tests was not measured.

在小型的卷轴测试中基于最大曲应变的成椭圆是有则的。

Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.

截面畸变是薄壁管小曲半径数控曲成容易出现的成缺陷之一。

A young man was bending low to push a heavily loaded barrow up a slope.

一个年轻人弓着背把一辆重载的小车推上斜坡。

The combination of bending and overblowing technique makes it true to play all the semitones on a diatonic harmonca.

压音和超吹技术的结合使得在一把口琴上演奏所有的大小调梦想成真。

In the end he admitted bending the truth. He had done some of his essay, but he hadn’t finished it.

最后他承认说的不完全是实话，他的文章是写了一部份，不过还有完成。

Currently, the products consist of toughened glass, interlayer glass, bulletproof glass, pickproof glass, fireproof glass, hollow glass and hot bending glass.

产品有钢化玻璃，夹层玻璃，防弹防盗玻璃，防火玻璃，中空及热玻璃。

The technique character of the baffle of inspirator was introduced.A feasible process plan was determined and the integral piercing blanking bending forming die was designed.

介绍了呼吸器挡板零件工艺特点,确定了合理的工艺方案,设计1副落料、冲孔、压三道工序一次成的模具。

Packng tools, Packing cutter, Gasket cutter, SWG winding machine, bending machine, Groover, Angling machine, Double jacketed machine, Gasket cutting machine, Puncher, Calender, Braider and so on.

密封机械 ：盘根工具，盘根切割工具，垫片切割工具，缠绕机，盘环机，铣槽机，倒角机，包覆机，双翦机，点焊机，冲齿机，辊压机，盘根编织机。

The tarsal joint of the hind leg of a digitigrade quadruped, such as a horse, corresponding to the human ankle but bending in the opposite direction.

穿在脚上的一种遮盖物（踝以下），它包括由皮革或塑胶做的柔软的鞋帮与由较硬的材料做的鞋底和鞋帮组成。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度和强度的影响进行了探讨。

Heat treatment and pre-strain, tensile test of the material and four point bending test have been carried to obtain the mechanical property of the undegraded and degraded material at low temperature.

本文首先通过分析复合脆化处理实验、拉伸实验和缺口试件四点曲实验的结果，考察比较某核压力容器钢在脆化处理前后的室温和低温力学性能。