Thus a wheel revolves on its axle.

于是,轮子旋转。

The rear axle carries the greatest weight.

后负荷最重的分量。

A wheel spins on an axle.

轮子旋转。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它的精度主要是指圆柱和方水准器的沿心360度翻身。

The article introduces a new type of project to design front axle lockpin hole machining tool.

文章介绍了一种新型的前桥锁销孔加工的工艺方法。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲、凸轮、摩擦嵌套、变速箱、架、飞轮等。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程和操作方法，是指导生产的重要的技术性文件。

Monomotor bogies , where both axles of the bogie are driven by a single motor , often encounter torsional resonances, which lead to periodic longitudinal slip.

对于单马达转向架，转向架的两根由同一个马达驱动，常常会遇到扭转的共，导致周期性的滑动。

The square regulation graded index fiber is considered to have fairly good dispersion property because the near axle meridian light in the fiber may focalize automatically.

本文首先推导出平方律渐变光纤中,近子午光线的轨迹方程。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态性能试验法测试空载时精密推台锯的德国产锯片锯齿径向跳动值,以及旋转主动情况。

Thus a wheel revolves on its axle.

于是,轮子在轴上旋。

The rear axle carries the greatest weight.

后轴负荷最重的分量。

A wheel spins on an axle.

轮子在轴上旋。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它的精度主要是指圆水准器的沿轴心360度翻身。

The article introduces a new type of project to design front axle lockpin hole machining tool.

文章介绍了一种新型的前桥锁销孔加工的工艺法。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、架、飞轮等。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程操作法，是指导生产的重要的技术性文件。

Monomotor bogies , where both axles of the bogie are driven by a single motor , often encounter torsional resonances, which lead to periodic longitudinal slip.

对于单向架，向架上的两根轴由同一个驱动，常常会遇到扭的共振，这将导致周期性的滑动。

The square regulation graded index fiber is considered to have fairly good dispersion property because the near axle meridian light in the fiber may focalize automatically.

本文首先推导出平律渐变光纤中,近轴子午光线的轨迹程。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态性能试验法测试空载时在精密推台锯上的德国产锯片锯齿径向跳动值,以及旋主轴振动情况。

Thus a wheel revolves on its axle.

于是,轮子在轴上旋转。

The rear axle carries the greatest weight.

后轴负荷最重的分量。

A wheel spins on an axle.

轮子在轴上旋转。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它的精度主要是指圆柱和水准器的沿轴心360度翻身。

The article introduces a new type of project to design front axle lockpin hole machining tool.

文章介绍了一种新型的前桥锁销孔加工的工艺法。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、架、飞轮等。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程和操作法，是指导生产的重要的技术性文件。

Monomotor bogies , where both axles of the bogie are driven by a single motor , often encounter torsional resonances, which lead to periodic longitudinal slip.

对于单马达转向架，转向架上的两根轴由同一个马达驱动，常常会遇到扭转的共振，这将导致周期性的滑动。

The square regulation graded index fiber is considered to have fairly good dispersion property because the near axle meridian light in the fiber may focalize automatically.

本文首先推导出平变光纤中,近轴子午光线的轨迹程。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态性能试验法测试空载时在精密推台锯上的德国产锯片锯齿径向跳动值,以及旋转主轴振动情况。

Thus a wheel revolves on its axle.

于是,轮子在轴上旋转。

The rear axle carries the greatest weight.

后轴负荷最重分量。

A wheel spins on an axle.

轮子在轴上旋转。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它精度主要是指圆柱和方水准器沿轴心360度翻身。

The article introduces a new type of project to design front axle lockpin hole machining tool.

章介绍了一种新型前桥锁销孔加工工艺方法。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、架、飞轮等。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程和操作方法，是指导生产重要技术性件。

Monomotor bogies , where both axles of the bogie are driven by a single motor , often encounter torsional resonances, which lead to periodic longitudinal slip.

对于单马达转向架，转向架上两根轴由同一个马达驱动，常常会遇到扭转共振，这将导致周期性滑动。

The square regulation graded index fiber is considered to have fairly good dispersion property because the near axle meridian light in the fiber may focalize automatically.

本推导出平方律渐变光纤中,近轴子午光线轨迹方程。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态性能试验法测试空载时在精密推台锯上德国产锯片锯齿径向跳动值,以及旋转主轴振动情况。

Thus a wheel revolves on its axle.

于是,轮子在轴上旋转。

The rear axle carries the greatest weight.

后轴负荷最重的分量。

A wheel spins on an axle.

轮子在轴上旋转。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它的精度主要是指圆柱和方水准器的沿轴心360度翻身。

The article introduces a new type of project to design front axle lockpin hole machining tool.

文章介绍了一种新型的前桥锁销孔工的工艺方法。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、套、变速箱、架、飞轮等。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

工工艺是规定产品或零件工工艺过程和操作方法，是指导生产的重要的技术性文件。

Monomotor bogies , where both axles of the bogie are driven by a single motor , often encounter torsional resonances, which lead to periodic longitudinal slip.

对于单马达转向架，转向架上的两根轴由同一个马达驱动，常常会遇到扭转的共振，这将导致周期性的滑动。

The square regulation graded index fiber is considered to have fairly good dispersion property because the near axle meridian light in the fiber may focalize automatically.

本文首先推导出平方律渐变光纤中,近轴子午光线的轨迹方程。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态性能试验法测试空载时在精密推台锯上的德国产锯片锯齿径向跳动值,以及旋转主轴振动情况。

Thus a wheel revolves on its axle.

于是,轮子在轴上旋转。

The rear axle carries the greatest weight.

后轴负荷最重分量。

A wheel spins on an axle.

轮子在轴上旋转。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它精度主要是指圆柱和方水准器沿轴心360度翻身。

The article introduces a new type of project to design front axle lockpin hole machining tool.

文章介绍了一种新型前桥锁销孔艺方法。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、架、飞轮等。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机艺是规定产品或零件机艺过程和操作方法，是指导生产重要技术性文件。

Monomotor bogies , where both axles of the bogie are driven by a single motor , often encounter torsional resonances, which lead to periodic longitudinal slip.

对于单马达转向架，转向架上两根轴由同一个马达驱动，常常会遇到扭转共振，这将导致周期性滑动。

The square regulation graded index fiber is considered to have fairly good dispersion property because the near axle meridian light in the fiber may focalize automatically.

本文首先推导出平方律渐变光纤中,近轴子午光线轨迹方程。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态性能试验法测试空载时在精密推台锯上德国产锯片锯齿径向跳动值,以及旋转主轴振动情况。

Thus a wheel revolves on its axle.

于是,轮子在轴上旋转。

The rear axle carries the greatest weight.

后轴负荷最重。

A wheel spins on an axle.

轮子在轴上旋转。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它精度主要是指圆柱和方水准器沿轴心360度翻身。

The article introduces a new type of project to design front axle lockpin hole machining tool.

文章介绍了一种新型前桥锁销孔加工工艺方法。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、架、飞轮等。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程和操作方法，是指导生产重要技术性文件。

Monomotor bogies , where both axles of the bogie are driven by a single motor , often encounter torsional resonances, which lead to periodic longitudinal slip.

对于单马达转向架，转向架上两根轴由同一个马达，会遇到扭转共振，这将导致周期性滑。

The square regulation graded index fiber is considered to have fairly good dispersion property because the near axle meridian light in the fiber may focalize automatically.

本文首先推导出平方律渐变光纤中,近轴子午光线轨迹方程。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用态性能试验法测试空载时在精密推台锯上德国产锯片锯齿径向跳值,以及旋转主轴振情况。

Thus a wheel revolves on its axle.

于是,轮子在轴上旋转。

The rear axle carries the greatest weight.

后轴负荷最分量。

A wheel spins on an axle.

轮子在轴上旋转。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它精度主是指圆柱和方水准器沿轴心360度翻。

The article introduces a new type of project to design front axle lockpin hole machining tool.

介绍了一种新型前桥锁销孔加工工艺方法。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、架、飞轮等。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺是规定产品或零件机械加工工艺过程和操作方法，是指导生产技术性件。

Monomotor bogies , where both axles of the bogie are driven by a single motor , often encounter torsional resonances, which lead to periodic longitudinal slip.

对于单马达转向架，转向架上两根轴由同一个马达驱动，常常会遇到扭转共振，这将导致周期性滑动。

The square regulation graded index fiber is considered to have fairly good dispersion property because the near axle meridian light in the fiber may focalize automatically.

本首先推导出平方律渐变光纤中,近轴子午光线轨迹方程。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态性能试验法测试空载时在精密推台锯上德国产锯片锯齿径向跳动值,以及旋转主轴振动情况。

Thus a wheel revolves on its axle.

于,轮子在上旋转。

The rear axle carries the greatest weight.

后负荷最重的分量。

A wheel spins on an axle.

轮子在上旋转。

Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials.

它的精度主要指圆柱和方水准器的沿心360度翻身。

The article introduces a new type of project to design front axle lockpin hole machining tool.

文章介绍了一种新型的前桥锁销孔加工的工艺方法。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

排气歧、、凸轮、摩擦嵌套、变速箱、架、飞轮等。

Then after thick, the essence two axle diameter localization drills the thread, the keyseat and the mill crank end surface.

机械加工工艺产品或零件机械加工工艺过程和操作方法，指导生产的重要的技术性文件。

Monomotor bogies , where both axles of the bogie are driven by a single motor , often encounter torsional resonances, which lead to periodic longitudinal slip.

对于单马达转向架，转向架上的两根由同一个马达驱动，常常会遇到扭转的共振，这将导致周期性的滑动。

The square regulation graded index fiber is considered to have fairly good dispersion property because the near axle meridian light in the fiber may focalize automatically.

本文首先推导出平方律渐变光纤中,近子午光线的轨迹方程。

Introducing a kind of dynamic capability study method which tested jumpiness of the sawblade made in Germany on the precision sizing saw machine, as well as vibration of principal rotation axle.

介绍一种用动态性能试验法测试空载时在精密推台锯上的德国产锯片锯齿径向跳动值,以及旋转主振动情况。