The government has decided to coin more one-yuan pieces.

政府决定再铸造一些一元的硬币。

Misrun is the common defects found in oven door castings process.

浇不足焦炉炉门铸件常见铸造缺陷。

The Royal Mint will strike a gold coin of commemorative.

英国皇家造币厂将铸造一种纪念金币。

These pennies were coined at the mint in London.

这些便士钱币伦敦一家制币厂铸造的。

The Romans learned to mint from the Greeks.

罗马人从希腊人那里学会了铸造钱币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型的方法。

A new kind of batcher drip nozzle used for casting metal grains and its manufacturing process have researched.

摘要研究了一种铸造金属颗粒用定量器滴嘴的结构及其制造工艺。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作为同类型产品或材料在制造过程中的参考。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮轴疲劳寿命的有效手段。

The semisteel after the treatment can be used in cast iron and it has a good economic effectiveness.

半钢经过增碳脱硫处理并合金可以用作铸造生铁,而且有较好的经济效益。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样大的铜器，所需金属料当在1000千克以上，且必须有较大的熔炉。

The RE(Y)-Mg-Si-Fe nodularizer had been used to cast heavy sectioned high ductile nodular iron cooling wall castings.

应用钇基重稀土镁复合球剂，铸造厚大断面韧性球铁冷却壁，成功地获得了铸件中心部位铸态性能。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从模具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁合金微孔的组织形态形成机理符合气体形成模型和溶质再分配理论,从而验证氢气析出形成显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片的断裂形貌与断裂机制等进行了分析。

It was proved that custom designed framework could solve the clinical dilemma of severe dentition attrition, food impaction and periodontitis, and the odontoptosis was repaired.

采用义齿个别设计铸造支架式可摘局部义齿修复各类缺牙，可较好地解决牙列重度磨耗、食物嵌塞、牙周疾患等问题。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂铸造用聚氨酯粘合剂的主要成份之一,它的结构及合成工艺条件决定了该类粘合剂性能。

The measuring method of sand compactability in laboratory is analyzed,and a fast measuring method is designed,and the intelligent instrument for fast measuring sand compactability are developed.

分析了铸造行业型砂紧实率现有测试方法,出了机电一体的型砂紧实率快速智能测试方法,并据此研制成功了便携式型砂紧实率快速智能测试仪。

Mainly uses in each kind of casting coating and in many kinds of ceramic colored glaze coating, serves as the parent metal the deflocculant, the thixotropic agent.

主要用于各种铸造涂料及多种陶瓷彩釉涂料中，用作基料的悬浮剂、触变剂。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

The government has decided to coin more one-yuan pieces.

政府决定再铸造一些一元的硬币。

Misrun is the common defects found in oven door castings process.

浇不足是焦炉炉门铸件常见铸造缺陷。

The Royal Mint will strike a gold coin of commemorative.

英国皇家造币厂将铸造一种纪念金币。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造的。

The Romans learned to mint from the Greeks.

罗马人从希腊人那里学会了铸造钱币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型的方法。

A new kind of batcher drip nozzle used for casting metal grains and its manufacturing process have researched.

摘要研究了一种铸造金属颗粒用定量器滴嘴的结构及其制造工艺。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作为同类型产品或材料在制造过程中的参考。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是高曲轴疲劳寿命的有效手段。

The semisteel after the treatment can be used in cast iron and it has a good economic effectiveness.

半钢经过增碳脱硫处理并合金化可以用作铸造生铁,而且有较好的经济效益。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的铜器，所需金属料当在1000千克以上，且必须有较大的熔炉。

The RE(Y)-Mg-Si-Fe nodularizer had been used to cast heavy sectioned high ductile nodular iron cooling wall castings.

应用钇基重稀土镁复合球化剂，铸造厚大断面高韧性球铁冷却壁，成功地获得了铸件中心部位铸态高性能。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从模具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁合金微孔的组织态成机理符合成模型和溶质再分配理论,从而验证氢析出成显微孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片的断裂貌与断裂机制等进行了分析。

It was proved that custom designed framework could solve the clinical dilemma of severe dentition attrition, food impaction and periodontitis, and the odontoptosis was repaired.

采用义齿个别设计铸造支架式可摘局部义齿修复各类缺牙，可较好地解决牙列重度磨耗、食物嵌塞、牙周疾患等问题。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂的主要成份之一,它的结构及合成工艺条件决定了该类粘合剂性能。

The measuring method of sand compactability in laboratory is analyzed,and a fast measuring method is designed,and the intelligent instrument for fast measuring sand compactability are developed.

分析了铸造行业型砂紧实率现有测试方法,出了机电一化的型砂紧实率快速智能测试方法,并据此研制成功了便携式型砂紧实率快速智能测试仪。

Mainly uses in each kind of casting coating and in many kinds of ceramic colored glaze coating, serves as the parent metal the deflocculant, the thixotropic agent.

主要用于各种铸造涂料及多种陶瓷彩釉涂料中，用作基料的悬浮剂、触变剂。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基不发热、不变、无应力、无硬点及退火情况。

The government has decided to coin more one-yuan pieces.

政府决定再铸造一些一元硬币。

Misrun is the common defects found in oven door castings process.

浇不足是焦炉炉门铸件常见铸造缺陷。

The Royal Mint will strike a gold coin of commemorative.

英国皇家造币厂将铸造一种纪念金币。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造。

The Romans learned to mint from the Greeks.

罗马人从希腊人那里学会了铸造钱币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型方法。

A new kind of batcher drip nozzle used for casting metal grains and its manufacturing process have researched.

摘了一种铸造金属颗粒用定量器滴嘴结构及其制造工艺。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

炼、铸造和热处理工艺,可作为同类型产品或材料在制造过程中参考。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是高曲轴疲劳寿命有效手段。

The semisteel after the treatment can be used in cast iron and it has a good economic effectiveness.

半钢经过增碳脱硫处理并合金化可以用作铸造生铁,而且有较好经济效益。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高铜器，所需金属料当在1000千克以上，且必须有较炉。

The RE(Y)-Mg-Si-Fe nodularizer had been used to cast heavy sectioned high ductile nodular iron cooling wall castings.

应用钇基重稀土镁复合球化剂，铸造厚断面高韧性球铁冷却壁，成功地获得了铸件中心部位铸态高性能。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从模具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁合金微孔组织形态形成机理符合气体形成模型和溶质再分配理论,从而验证氢气析出形成显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片断裂形貌与断裂机制等进行了分析。

It was proved that custom designed framework could solve the clinical dilemma of severe dentition attrition, food impaction and periodontitis, and the odontoptosis was repaired.

采用义齿个别设计铸造支架式可摘局部义齿修复各类缺牙，可较好地解决牙列重度磨耗、食物嵌塞、牙周疾患等问题。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂主成份之一,它结构及合成工艺条件决定了该类粘合剂性能。

The measuring method of sand compactability in laboratory is analyzed,and a fast measuring method is designed,and the intelligent instrument for fast measuring sand compactability are developed.

分析了铸造行业型砂紧实率现有测试方法,出了机电一体化型砂紧实率快速智能测试方法,并据此制成功了便携式型砂紧实率快速智能测试仪。

Mainly uses in each kind of casting coating and in many kinds of ceramic colored glaze coating, serves as the parent metal the deflocculant, the thixotropic agent.

主用于各种铸造涂料及多种陶瓷彩釉涂料中，用作基料悬浮剂、触变剂。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

The government has decided to coin more one-yuan pieces.

政府决定再铸造一些一元硬币。

Misrun is the common defects found in oven door castings process.

浇不足是焦炉炉门铸件常见铸造缺陷。

The Royal Mint will strike a gold coin of commemorative.

英国皇家造币厂将铸造一种纪念金币。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造。

The Romans learned to mint from the Greeks.

罗马人从希腊人那里学会了铸造钱币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型方法。

A new kind of batcher drip nozzle used for casting metal grains and its manufacturing process have researched.

摘要研究了一种铸造金属颗粒用定器滴嘴结构及其制造工艺。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作为同类型产品或材料在制造过程中参考。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造采用氧氮化是高曲轴疲劳寿有效手段。

The semisteel after the treatment can be used in cast iron and it has a good economic effectiveness.

半钢经过增碳脱硫处理合金化可以用作铸造生铁,而且有较好经济效益。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大铜器，所需金属料当在1000千克以上，且必须有较大熔炉。

The RE(Y)-Mg-Si-Fe nodularizer had been used to cast heavy sectioned high ductile nodular iron cooling wall castings.

应用钇基重稀土镁复合球化剂，铸造厚大断面高韧性球铁冷却壁，成功地获得了铸件中心部位铸态高性能。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从模具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁合金微孔组织形态形成机理符合气体形成模型和溶再分配理论,从而验证氢气析出形成显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片断裂形貌与断裂机制等进行了分析。

It was proved that custom designed framework could solve the clinical dilemma of severe dentition attrition, food impaction and periodontitis, and the odontoptosis was repaired.

采用义齿个别设计铸造支架式可摘局部义齿修复各类缺牙，可较好地解决牙列重度磨耗、食物嵌塞、牙周疾患等问题。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂主要成份之一,它结构及合成工艺条件决定了该类粘合剂性能。

The measuring method of sand compactability in laboratory is analyzed,and a fast measuring method is designed,and the intelligent instrument for fast measuring sand compactability are developed.

分析了铸造行业型砂紧实率现有测试方法,出了机电一体化型砂紧实率快速智能测试方法,据此研制成功了便携式型砂紧实率快速智能测试仪。

Mainly uses in each kind of casting coating and in many kinds of ceramic colored glaze coating, serves as the parent metal the deflocculant, the thixotropic agent.

主要用于各种铸造涂料及多种陶瓷彩釉涂料中，用作基料悬浮剂、触变剂。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机研制成功，给铸造缺陷修复带来了一次彻底革！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

The government has decided to coin more one-yuan pieces.

政府决定再铸造一些一元的硬币。

Misrun is the common defects found in oven door castings process.

浇不足是焦炉炉门铸件常见铸造缺陷。

The Royal Mint will strike a gold coin of commemorative.

英国皇家造币厂将铸造一种纪念金币。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造的。

The Romans learned to mint from the Greeks.

罗马人从希腊人那里学会了铸造钱币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型的方法。

A new kind of batcher drip nozzle used for casting metal grains and its manufacturing process have researched.

摘要研究了一种铸造金属颗粒用定量器滴嘴的结构及其制造工艺。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作为同类型产品或材料在制造过程中的参考。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是高曲轴疲劳寿命的有效手段。

The semisteel after the treatment can be used in cast iron and it has a good economic effectiveness.

半钢经过增碳脱硫处理并金化可以用作铸造生铁,而且有较好的经济效益。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的铜器，所需金属料当在1000千克以上，且必须有较大的熔炉。

The RE(Y)-Mg-Si-Fe nodularizer had been used to cast heavy sectioned high ductile nodular iron cooling wall castings.

应用钇基重稀土镁复球化剂，铸造厚大断面高韧性球铁冷却壁，成功地获得了铸件中心部位铸态高性能。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从模具上滑下,转键式刚性离器,滑块上装有压塌式保险装置。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁金微孔的组织形态形成机理符形成模型和溶质再分配理论,从而验证氢析出形成显微孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用视显微镜、扫描电镜等分析手段对K18金增压器涡轮铸造叶片的断裂形貌与断裂机制等进行了分析。

It was proved that custom designed framework could solve the clinical dilemma of severe dentition attrition, food impaction and periodontitis, and the odontoptosis was repaired.

采用义齿个别设计铸造支架式可摘局部义齿修复各类缺牙，可较好地解决牙列重度磨耗、食物嵌塞、牙周疾患等问题。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘剂的主要成份之一,它的结构及成工艺条件决定了该类粘剂性能。

The measuring method of sand compactability in laboratory is analyzed,and a fast measuring method is designed,and the intelligent instrument for fast measuring sand compactability are developed.

分析了铸造行业型砂紧实率现有测试方法,出了机电一化的型砂紧实率快速智能测试方法,并据此研制成功了便携式型砂紧实率快速智能测试仪。

Mainly uses in each kind of casting coating and in many kinds of ceramic colored glaze coating, serves as the parent metal the deflocculant, the thixotropic agent.

主要用于各种铸造涂料及多种陶瓷彩釉涂料中，用作基料的悬浮剂、触变剂。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基不发热、不变形、无应力、无硬点及退火情况。

The government has decided to coin more one-yuan pieces.

政府决定再铸造一些一元的硬币。

Misrun is the common defects found in oven door castings process.

浇不足是焦炉炉门铸件常见铸造缺陷。

The Royal Mint will strike a gold coin of commemorative.

英国皇家造币厂将铸造一种纪念金币。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造的。

The Romans learned to mint from the Greeks.

罗马人从希腊人那里学会了铸造钱币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型的方法。

A new kind of batcher drip nozzle used for casting metal grains and its manufacturing process have researched.

摘要研究了一种铸造金属颗粒用定量器滴嘴的结构及其制造工艺。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热理工艺,可作为同类型产品或材料在制造的参考。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是高曲轴疲劳寿命的有效手段。

The semisteel after the treatment can be used in cast iron and it has a good economic effectiveness.

半钢经增碳理并合金化可以用作铸造生铁,而且有较好的经济效益。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的铜器，所需金属料当在1000千克以上，且必须有较大的熔炉。

The RE(Y)-Mg-Si-Fe nodularizer had been used to cast heavy sectioned high ductile nodular iron cooling wall castings.

应用钇基重稀土镁复合球化剂，铸造厚大断面高韧性球铁冷却壁，成功地获得了铸件心部位铸态高性能。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从模具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁合金微孔的组织形态形成机理符合气体形成模型和溶质再分配理论,从而验证氢气析出形成显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片的断裂形貌与断裂机制等进行了分析。

It was proved that custom designed framework could solve the clinical dilemma of severe dentition attrition, food impaction and periodontitis, and the odontoptosis was repaired.

采用义齿个别设计铸造支架式可摘局部义齿修复各类缺牙，可较好地解决牙列重度磨耗、食物嵌塞、牙周疾患等问题。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂的主要成份之一,它的结构及合成工艺条件决定了该类粘合剂性能。

The measuring method of sand compactability in laboratory is analyzed,and a fast measuring method is designed,and the intelligent instrument for fast measuring sand compactability are developed.

分析了铸造行业型砂紧实率现有测试方法,出了机电一体化的型砂紧实率快速智能测试方法,并据此研制成功了便携式型砂紧实率快速智能测试仪。

Mainly uses in each kind of casting coating and in many kinds of ceramic colored glaze coating, serves as the parent metal the deflocculant, the thixotropic agent.

主要用于各种铸造涂料及多种陶瓷彩釉涂料，用作基料的悬浮剂、触变剂。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制成功，给铸造缺陷修复带来了一次彻底革命！焊补基体不发热、不变形、无应力、无硬点及退火情况。

The government has decided to coin more one-yuan pieces.

政府决定再铸造一些一元硬币。

Misrun is the common defects found in oven door castings process.

浇不足是焦炉炉门铸件常见铸造缺陷。

The Royal Mint will strike a gold coin of commemorative.

英国皇家造币厂将铸造一种纪念金币。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造。

The Romans learned to mint from the Greeks.

罗马人从希腊人那里学会了铸造钱币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型方法。

A new kind of batcher drip nozzle used for casting metal grains and its manufacturing process have researched.

摘要研究了一种铸造金属颗粒用定量器滴嘴结构及其制造工艺。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸造和热处理工艺,可作为同类型产品或材料在制造过程考。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是高曲轴疲劳寿命有效手段。

The semisteel after the treatment can be used in cast iron and it has a good economic effectiveness.

半钢经过硫处理并合金化可以用作铸造生铁,而且有较好经济效益。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大铜器，所需金属料当在1000千克以上，且必须有较大熔炉。

The RE(Y)-Mg-Si-Fe nodularizer had been used to cast heavy sectioned high ductile nodular iron cooling wall castings.

应用钇基重稀土镁复合球化剂，铸造厚大断面高韧性球铁冷却壁，成功地获得了铸件心部位铸态高性能。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从模具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁合金微孔组织形态形成机理符合气体形成模型和溶质再分配理论,从而验证氢气析出形成显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微镜、扫描电镜等分析手段对K18合金压器涡轮铸造叶片断裂形貌与断裂机制等进行了分析。

It was proved that custom designed framework could solve the clinical dilemma of severe dentition attrition, food impaction and periodontitis, and the odontoptosis was repaired.

采用义齿个别设计铸造支架式可摘局部义齿修复各类缺牙，可较好地解决牙列重度磨耗、食物嵌塞、牙周疾患等问题。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂主要成份之一,它结构及合成工艺条件决定了该类粘合剂性能。

The measuring method of sand compactability in laboratory is analyzed,and a fast measuring method is designed,and the intelligent instrument for fast measuring sand compactability are developed.

分析了铸造行业型砂紧实率现有测试方法,出了机电一体化型砂紧实率快速智能测试方法,并据此研制成功了便携式型砂紧实率快速智能测试仪。

Mainly uses in each kind of casting coating and in many kinds of ceramic colored glaze coating, serves as the parent metal the deflocculant, the thixotropic agent.

主要用于各种铸造涂料及多种陶瓷彩釉涂料，用作基料悬浮剂、触变剂。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程基体不发热、不变形、无应力、无硬点及退火情况。

The government has decided to coin more one-yuan pieces.

政府决定再铸一些一元的硬。

Misrun is the common defects found in oven door castings process.

浇不足是焦炉炉门铸件常见铸缺陷。

The Royal Mint will strike a gold coin of commemorative.

英国皇家将铸一种纪念金。

These pennies were coined at the mint in London.

这些便士钱是伦敦一家制铸的。

The Romans learned to mint from the Greeks.

罗马人希腊人那里学会了铸钱。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸砂型的方法。

A new kind of batcher drip nozzle used for casting metal grains and its manufacturing process have researched.

摘要研究了一种铸金属颗粒用定量器滴嘴的结构及其制工艺。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

熔炼、铸和热处理工艺,可作为同类型产品或材在制过程中的参考。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸质量并采用氧氮化是高曲轴疲劳寿命的有效手段。

The semisteel after the treatment can be used in cast iron and it has a good economic effectiveness.

半钢经过增碳脱硫处理并合金化可以用作铸生铁,而且有较好的经济效益。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸这样高大的铜器，所需金属当在1000千克以上，且必须有较大的熔炉。

The RE(Y)-Mg-Si-Fe nodularizer had been used to cast heavy sectioned high ductile nodular iron cooling wall castings.

应用钇基重稀土镁复合球化剂，铸厚大断面高韧性球铁冷却壁，成功地获得了铸件中心部位铸态高性能。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸结构,倾斜时便于冲件或废具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸镁合金微孔的组织形态形成机理符合气体形成型和溶质再分配理论,而验证氢气析出形成显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸叶片的断裂形貌与断裂机制等进行了分析。

It was proved that custom designed framework could solve the clinical dilemma of severe dentition attrition, food impaction and periodontitis, and the odontoptosis was repaired.

采用义齿个别设计铸支架式可摘局部义齿修复各类缺牙，可较好地解决牙列重度磨耗、食物嵌塞、牙周疾患等问题。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸用聚氨酯粘合剂的主要成份之一,它的结构及合成工艺条件决定了该类粘合剂性能。

The measuring method of sand compactability in laboratory is analyzed,and a fast measuring method is designed,and the intelligent instrument for fast measuring sand compactability are developed.

分析了铸行业型砂紧实率现有测试方法,出了机电一体化的型砂紧实率快速智能测试方法,并据此研制成功了便携式型砂紧实率快速智能测试仪。

Mainly uses in each kind of casting coating and in many kinds of ceramic colored glaze coating, serves as the parent metal the deflocculant, the thixotropic agent.

主要用于各种铸涂及多种陶瓷彩釉涂中，用作基的悬浮剂、触变剂。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸缺陷修补机的研制成功，给铸缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

The government has decided to coin more one-yuan pieces.

政府决定再铸造一些一元的硬币。

Misrun is the common defects found in oven door castings process.

浇不足是焦门铸件常见铸造缺陷。

The Royal Mint will strike a gold coin of commemorative.

英国皇家造币厂将铸造一种纪念金币。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造的。

The Romans learned to mint from the Greeks.

罗马人从希腊人那里学会了铸造钱币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型的方法。

A new kind of batcher drip nozzle used for casting metal grains and its manufacturing process have researched.

研究了一种铸造金属颗粒用定量器滴嘴的结构及其制造工艺。

Smelting,cast-on outwell and heat treatment handicraft,may accomplish with the type product or material in reference in creating process.

炼、铸造和热处理工艺,可作为同类型产品或材料在制造过程中的参考。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是高曲轴疲劳寿命的有效手段。

The semisteel after the treatment can be used in cast iron and it has a good economic effectiveness.

半钢经过增碳脱硫处理并合金化可以用作铸造生铁,而且有较好的经济效益。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的铜器，所需金属料当在1000千克以上，且必须有较大的。

The RE(Y)-Mg-Si-Fe nodularizer had been used to cast heavy sectioned high ductile nodular iron cooling wall castings.

用钇基重稀土镁复合球化剂，铸造厚大断面高韧性球铁冷却壁，成功地获得了铸件中心部位铸态高性能。

The machine body is in inclinable cast structure,making it convenient for punched items or scraps to slide down on the dies.

机身为可倾式铸造结构,倾斜时便于冲件或废料从模具上滑下,转键式刚性离合器,滑块上装有压塌式保险装置。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁合金微孔的组织形态形成机理符合气体形成模型和溶质再分配理论,从而验证氢气析出形成显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片的断裂形貌与断裂机制等进行了分析。

It was proved that custom designed framework could solve the clinical dilemma of severe dentition attrition, food impaction and periodontitis, and the odontoptosis was repaired.

采用义齿个别设计铸造支架式可局部义齿修复各类缺牙，可较好地解决牙列重度磨耗、食物嵌塞、牙周疾患等问题。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂的主成份之一,它的结构及合成工艺条件决定了该类粘合剂性能。

The measuring method of sand compactability in laboratory is analyzed,and a fast measuring method is designed,and the intelligent instrument for fast measuring sand compactability are developed.

分析了铸造行业型砂紧实率现有测试方法,出了机电一体化的型砂紧实率快速智能测试方法,并据此研制成功了便携式型砂紧实率快速智能测试仪。

Mainly uses in each kind of casting coating and in many kinds of ceramic colored glaze coating, serves as the parent metal the deflocculant, the thixotropic agent.

主用于各种铸造涂料及多种陶瓷彩釉涂料中，用作基料的悬浮剂、触变剂。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无力、无硬点及退火情况。