The feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.
通过试验分析,探索了煤直接液化残渣采用热态、批量连续进
炼焦工艺的可行性。
jìn liào de
feed-inBased on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.
在分析现有热磨机回转阀进装置的基础上，提出了双作用回转阀进装置的设计思路。
Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.
通过在
进方向平行的底部底板上铣出一个狭槽来实现压床上模具中心的调整。
The grooved head of the sprue puller creates an effective undercut which is used to pull the sprue, or secondary sprues in underfeed designs.
主
道拉杆头部的凹槽形成了一个有效的底切，可以用来拉出主道或者是下进设计中的二级主道。
Mould design of PU hydroclone by involute feeding is introduced.Practice proves,this mould structure is reasonable and the product is took out expediently,it gains marked economic benefits.
介绍了渐开线给
器进体模具的设计,实践证明,此模具结构合理,脱模方便,有一定的经济价值。
声明：以上例句、词性分类均由互联网资源自动生成，部分未经过人工审核，其表达内容亦不代表本软件的观点；若发现问题，欢迎向我们指正。
用户正在搜索
Mosaic law, mosaicism, mosaicist, mosaicker, mosaics, mosaictype, mosambique, Mosan, mosandrite, mosanon,
相似单词
进口外汇, 进口许可, 进款, 进来, 进来的, 进料的, 进路, 进取, 进取的, 进取的精神,
jìn liào de
feed-inThe feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.
通过试验分析,探索了煤直接液化残渣采
热态、批量连续进料炼焦工艺的可行性。
Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.
在分析现有热磨机
阀进料装置的基础上，提
了双作阀进料装置的设计思路。
Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.
通过在进料方向平行的底部底板上铣
狭槽来实现压床上模具中心的调整。
The grooved head of the sprue puller creates an effective undercut which is used to pull the sprue, or secondary sprues in underfeed designs.
主流道拉料杆头部的凹槽形成了有效的底切，可以来拉主流道或者是下进料设计中的二级主流道。
Mould design of PU hydroclone by involute feeding is introduced.Practice proves,this mould structure is reasonable and the product is took out expediently,it gains marked economic benefits.
介绍了渐开线给料旋流器进料体模具的设计,实践证明,此模具结构合理,脱模方便,有定的经济价值。
声明：以上例句、词性分类均由互联网资源自动生成，部分未经过人工审核，其表达内容亦不代表本软件的观点；若发现问题，欢迎向我们指正。
用户正在搜索
Moslemic, Moslemism, Moslemize, Moslems, Mosley, Mosleyite, mosophase, mososeries, Mosotho, Mosottifield,
相似单词
进口外汇, 进口许可, 进款, 进来, 进来的, 进料的, 进路, 进取, 进取的, 进取的精神,
jìn liào de
feed-inThe feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.
通过试验分析,探索了煤直接液化残渣采用热态、批量连续进料炼焦工艺
可
性。
Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.
在分析现有热磨机回转阀进料装置基础上，提出了双作用回转阀进料装置
路。
Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.
通过在进料方向
底部底板上铣出一个狭槽来实现压床上模具中心调整。
The grooved head of the sprue puller creates an effective undercut which is used to pull the sprue, or secondary sprues in underfeed designs.
主流道拉料杆头部凹槽形成了一个有效底切，可以用来拉出主流道或者是下进料中二级主流道。
Mould design of PU hydroclone by involute feeding is introduced.Practice proves,this mould structure is reasonable and the product is took out expediently,it gains marked economic benefits.
介绍了渐开线给料旋流器进料体模具,实践证明,此模具结构合理,脱模方便,有一定经济价值。
声明：以上例句、词性分类均由互联网资源自动生成，部分未经过人工审核，其表达内容亦不代表本软件
观点；若发现问题，欢迎向我们指正。
用户正在搜索
Mosquitoes, mosquitofish, MOSRAM, moss, moss agate, moss green, Mossad, mossback, mossbanker, mossberry,
相似单词
进口外汇, 进口许可, 进款, 进来, 进来的, 进料的, 进路, 进取, 进取的, 进取的精神,
jìn liào de
feed-inThe feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.
通过试验分析,探索了煤直接液化残渣采用热态、批量
料炼焦工艺可行性。
Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.
在分析现有热磨机回转阀料装置基础上，提出了双作用回转阀料装置设计思路。
Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.
通过在料方向平行
部板上铣出一个狭槽来实现压床上模具中心调整。
The grooved head of the sprue puller creates an effective undercut which is used to pull the sprue, or secondary sprues in underfeed designs.
主流道拉料杆头部凹槽形成了一个有效
，可以用来拉出主流道或者是下料设计中二级主流道。
Mould design of PU hydroclone by involute feeding is introduced.Practice proves,this mould structure is reasonable and the product is took out expediently,it gains marked economic benefits.
介绍了渐开线给料旋流器料体模具设计,实践证明,此模具结构合理,脱模方便,有一定经济价值。
声明：以上例句、词性分类均由互联网资源自动生成，部分未经过人工审核，其表达内容亦不代表本软件观点；若发现问题，欢迎向我们指正。
用户正在搜索
mosslike, mosso, MOSSOS, mossottite, mosstone, mosstrooper, mossy, most, most favored nation, most of all,
相似单词
进口外汇, 进口许可, 进款, 进来, 进来的, 进料的, 进路, 进取, 进取的, 进取的精神,
jìn liào de
feed-inThe feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.
通过试验分析,探索了煤直接液化残渣采用热态、批量连续料炼焦工艺的可行性。
Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.
在分析现有热磨机回
料装置的基础
，提了双作用回料装置的设计思路。
Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.
通过在料方向平行的底部底板
一个狭槽来实现压床模具中心的调整。
The grooved head of the sprue puller creates an effective undercut which is used to pull the sprue, or secondary sprues in underfeed designs.
主流道拉料杆头部的凹槽形成了一个有效的底切，可以用来拉主流道或者是下料设计中的二级主流道。
Mould design of PU hydroclone by involute feeding is introduced.Practice proves,this mould structure is reasonable and the product is took out expediently,it gains marked economic benefits.
介绍了渐开线给料旋流器料体模具的设计,实践证明,此模具结构合理,脱模方便,有一定的经济价值。
声明：以
例句、词性分类均由互联网资源自动生成，部分未经过人工审核，其表达内容亦不代表本软件的观点；若发现问题，欢迎向我们指正。
用户正在搜索
Motaloy, motard, motazomin, mote, moted, motel, Motels, moteorite, motes, motet,
相似单词
进口外汇, 进口许可, 进款, 进来, 进来的, 进料的, 进路, 进取, 进取的, 进取的精神,
jìn liào de
feed-inThe feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.
通过试验分析,探索了煤直接液化残渣采用热态、批量连续进料炼焦工艺可行性。
Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.
在分析现有热磨机回转阀进料装置
，提出了双作用回转阀进料装置设计思路。
Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.
通过在进料方向平行底部底板铣出一个狭槽来实现压
具中心调整。
The grooved head of the sprue puller creates an effective undercut which is used to pull the sprue, or secondary sprues in underfeed designs.
主流道拉料杆头部凹槽形成了一个有效底切，可以用来拉出主流道或者是下进料设计中二级主流道。
Mould design of PU hydroclone by involute feeding is introduced.Practice proves,this mould structure is reasonable and the product is took out expediently,it gains marked economic benefits.
介绍了渐开线给料旋流器进料体具设计,实践证明,此具结构合理,脱方便,有一定经济价值。
声明：以例句、词性分类均由互联网资源自动生成，部分未经过人工审核，其表达内容亦不代表本软件观点；若发现问题，欢迎向我们指正。
用户正在搜索
mother of pearl, Mother Superior, Mother Teresa, mother tongue, mother wit, motherboard, mothercraft, motherfucking, motherhood, mothering,
相似单词
进口外汇, 进口许可, 进款, 进来, 进来的, 进料的, 进路, 进取, 进取的, 进取的精神,
jìn liào de
feed-inThe feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.
通过试验分析,探索了煤直接液化残渣采用热态、批量连续进料炼焦工艺可性。
Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.
在分析现有热磨机回转阀进料装置基础上，提出了双作用回转阀进料装置路。
Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.
通过在进料方向底部底板上铣出一个狭槽来实现压床上模具中心调整。
The grooved head of the sprue puller creates an effective undercut which is used to pull the sprue, or secondary sprues in underfeed designs.
主流道拉料杆头部凹槽形成了一个有效底切，可以用来拉出主流道或者是下进料中二级主流道。
Mould design of PU hydroclone by involute feeding is introduced.Practice proves,this mould structure is reasonable and the product is took out expediently,it gains marked economic benefits.
介绍了渐开线给料旋流器进料体模具,实践证明,此模具结构合理,脱模方便,有一定经济价值。
声明：以上例句、词性分类均由互联网资源自动生成，部分未经过人工审核，其表达内容亦不代表本软件观点；若发现问题，欢迎向我们指正。
用户正在搜索
mothers, mother-to-be, motherwort, mothery, mothproof, moth-proofer, mothy, motidiol, motif, motifs,
相似单词
进口外汇, 进口许可, 进款, 进来, 进来的, 进料的, 进路, 进取, 进取的, 进取的精神,
jìn liào de
feed-inThe feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.
通过试验分
,探索了煤直接液化残渣采用热态、批量连续进炼焦工艺的可行性。
Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.
在分
有热磨机回转阀进装置的基础上，提出了双作用回转阀进装置的设计思路。
Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.
通过在进方向平行的底部底板上铣出一个狭槽来实压床上模具中心的调整。
The grooved head of the sprue puller creates an effective undercut which is used to pull the sprue, or secondary sprues in underfeed designs.
主流道拉
部的凹槽形成了一个有效的底切，可以用来拉出主流道或者是下进设计中的二级主流道。
Mould design of PU hydroclone by involute feeding is introduced.Practice proves,this mould structure is reasonable and the product is took out expediently,it gains marked economic benefits.
介绍了渐开线给旋流器进体模具的设计,实践证明,此模具结构合理,脱模方便,有一定的经济价值。
声明：以上例句、词性分类均由互联网资源自动生成，部分未经过人工审核，其表达内容亦不代表本软件的观点；若发
问题，欢迎向我们指正。
用户正在搜索
Motion-JPEG, motionless, motionlink, motion-opposing, motique, MOTIS, motivate, motivated, motivation, motivational,
相似单词
进口外汇, 进口许可, 进款, 进来, 进来的, 进料的, 进路, 进取, 进取的, 进取的精神,
jìn liào de
feed-inThe feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.
通过试验分析,探索了煤直接液化残渣采用热态、批量连续进料炼焦工艺可行性。
Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.
在分析现有热磨机回转阀进料装置，提出了双作用回转阀进料装置设计思路。
Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.
通过在进料方向平行底部底板铣出一个狭槽来实现压具中心调整。
The grooved head of the sprue puller creates an effective undercut which is used to pull the sprue, or secondary sprues in underfeed designs.
主流道拉料杆头部凹槽形成了一个有效底切，可以用来拉出主流道或者是下进料设计中二级主流道。
Mould design of PU hydroclone by involute feeding is introduced.Practice proves,this mould structure is reasonable and the product is took out expediently,it gains marked economic benefits.
介绍了渐开线给料旋流器进料体具设计,实践证明,此具结构合理,脱方便,有一定经济价值。
声明：以例句、词性分类均由互联网资源自动生成，部分未经过人工审核，其表达内容亦不代表本软件观点；若发现问题，欢迎向我们指正。
用户正在搜索
moto, motobloc, motocar, motocepter, motoceptor, motocrane, motocross, motofacient, motoneuron, motoneurone,
相似单词
进口外汇, 进口许可, 进款, 进来, 进来的, 进料的, 进路, 进取, 进取的, 进取的精神,
jìn liào de
feed-inThe feasibility of thermal state continuative feeding coking process with coal liquefaction residue was discussed through experiment study.
通过试验分析,探索了煤直接液化残渣采用热态、批量连续进料炼焦工艺可行性。
Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.
在分析现有热磨机回转阀进料
基础上，提出了双作用回转阀进料设计思路。
Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.
通过在进料方向平行底部底板上铣出一个狭槽来实现压床上
心调整。
The grooved head of the sprue puller creates an effective undercut which is used to pull the sprue, or secondary sprues in underfeed designs.
主流道拉料杆头部凹槽形成了一个有效底切，可以用来拉出主流道或者是下进料设计二级主流道。
Mould design of PU hydroclone by involute feeding is introduced.Practice proves,this mould structure is reasonable and the product is took out expediently,it gains marked economic benefits.
介绍了渐开线给料旋流器进料体设计,实践证明,此结构合理,脱方便,有一定经济价值。
声明：以上例句、词性分类均由互联网资源自动生成，部分未经过人工审核，其表达内容亦不代表本软件观点；若发现问题，欢迎向我们指正。
用户正在搜索
motor nerve, motor neuron, motor oil, motor pool, motor scooter, motor truck, motor vehicle, motorable, Motorail, Motorama,
相似单词
进口外汇, 进口许可, 进款, 进来, 进来的, 进料的, 进路, 进取, 进取的, 进取的精神,