The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦磨损实验,分析了新型高性能粘结剂含量和制备压力对摩擦数及磨损率的影响,得到了优化的制备工艺,为新型退摩擦材料的研究提供了理论和实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

料和纸张一样具有多孔性，容易使核糊料封面所用的水溶性粘结剂渗入，料的粘接性好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染料渗透实验和扫描电镜观察对三种牙本质粘结剂粘结离体纵折后牙进行微渗漏测试，评价其封闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等素对渗水砖的渗水速度和强度的影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦磨损实验,分析了新能粘结剂含量和制备压力对摩擦因数及磨损率的影响,得到了优化的制备工艺,为新抗热衰退摩擦材料的研究提供了理论和实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料和纸张一样具有多孔，容易使核糊布料封面所用的水溶粘结剂渗入，因此布料的粘接好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染料渗透实验和扫描电镜观察对三种牙本质粘结剂粘结折后牙进行微渗漏测试，评价其封闭能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度和强度的影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦磨损实验,分析了新能粘结剂含量和制备压力对摩擦因数及磨损率的影响,得到了优化的制备工艺,为新抗热衰退摩擦材料的研究提供了理论和实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料和纸张一样具有多孔，容易使核糊布料封面所用的水溶粘结剂渗入，因此布料的粘接好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染料渗透实验和扫描电镜观察对三种牙本质粘结剂粘结折后牙进行微渗漏测试，评价其封闭能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度和强度的影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦磨损实验,分析了高性能粘结剂含量和制备压力对摩擦因数及磨损率影响,得到了优化制备工艺,为热衰退摩擦材研究提供了理论和实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

和纸张一样具有多孔性，容易使核糊封面所用水溶性粘结剂渗入，因此粘接性好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染渗透实验和扫描电镜观察对三种牙本质粘结剂粘结离体纵折后牙进行微渗漏测试，评价其封闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成压力、骨粒径、保温时间、烧成温度等因素对渗水砖渗水速度和强度影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦磨损实,了新型高性能粘结剂含量和制备压力对摩擦因数及磨损率的影响,得到了优化的制备工艺,为新型抗热衰退摩擦材料的研究提供了理论和实依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料和纸张一样具有多孔性，容易使核糊布料封面所用的水溶性粘结剂渗入，因此布料的粘接性好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染料渗透实和扫描电镜观察对三种本质粘结剂粘结离体纵折后微渗漏测试，评价其封闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

别从外加粘结剂百数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度和强度的影响了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦磨损验,分析了新型高性能粘结剂含量和制备压力对摩擦因数及磨损响,得到了优化制备工艺,为新型抗热衰退摩擦材料研究提供了理论和验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料和纸张一样具有多孔性，容易使核糊布料封面所用水溶性粘结剂入，因此布料粘接性好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染料验和扫描电镜观察对三种牙本质粘结剂粘结离体纵折后牙进行微漏测试，评价其封闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素对水砖水速度和强度响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通摩擦擦磨损实验,分析了新型高性能粘结剂含量和制备压力对摩擦因数及磨损率的影响,得到了优化的制备工艺,为新型抗热衰退摩擦材料的研究提供了理论和实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料和纸张一样具有多孔性，容易使核糊布料面所用的水溶性粘结剂渗入，因此布料的粘接性好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通染料渗透实验和扫描电镜观察对三种牙本质粘结剂粘结离体纵折后牙进行微渗漏测试，评闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水度和强度的影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

过定速摩擦擦磨损实验,分析了新型高粘结剂含量和制备压力对摩擦因数及磨损率的影响,得到了优化的制备工艺,为新型抗热衰退摩擦材料的研究提供了理论和实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料和纸张一样具有多孔，容易使核糊布料封面所用的水溶粘结剂渗入，因此布料的粘接好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

过染料渗透实验和扫描电镜观察对三种牙本质粘结剂粘结离体纵折后牙进行微渗漏测试，评价其封。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等因素对渗水砖的渗水速度和强度的影响进行了探讨。

The influence of a new high-performance bond on the heat-fading-resistance of a self-manufactured semimetal friction materials used for auto brake disk was discussed.

通过定速摩擦擦磨损实验,分析了新型高性能粘结剂含量和制备压力对摩擦数及磨损率的影响,得到了优化的制备工艺,为新型抗摩擦材料的研究提供了理论和实验依据。

And as all have nuclear polyporous dvysocket making cloth cover the infiltration of water soluble Binder, so the fabric adhesive well, easy to layers.

布料和纸张一样具有多孔性，容易使核糊布料封面所用的水溶性粘结剂渗，布料的粘接性好，容易裱合。

Objective:To appraise the obturation capability of bonded vertically fractured posterior tooth using 3 different detin adhesive by microleakage tests and scan electron microscopy(SEM) observation.

通过染料渗透实验和扫描电镜观察对三种牙本质粘结剂粘结离体纵折后牙进行微渗漏测试，评价其封闭性能。

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

分别从外加粘结剂百分数、成型压力、骨料粒径、保温时间、烧成温度等素对渗水砖的渗水速度和强度的影响进行了探讨。