He joined two blocks of wood with glue.

他用胶水把两块木头粘合起来。

B-the layers of wood together with glue.

用乳胶把一层层木板粘合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制剂，全粉末接压片干燥粘合剂，胶囊填充剂,崩解剂，湿法造粒粘合剂和着色延展剂。

All perpends are to be strictly true and square and the whole properly bonded together.

所有处必须精确和方正，且整体要粘合妥当。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制钠—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜润湿性和粘合性。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大和机理也用于压片粘合成型。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶机械性能、工艺性能、粘合性能及在制冷压缩机密封中应用。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板黏合剂同纸板黏合剂间形成一个集合，这种粘合本身分子间粘合称为凝聚粘合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样间苯二酚-甲醛树脂(以下简称RF树脂)溶液当量粘度,来间接判断RF树脂粘合性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂主要成份之一,它结构及合成工艺条件决定了该类粘合剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂流动性和产品物理机械性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖容器经过感应圈时，即产生涡流瞬时发热，使铝箔与瓶口紧密地粘合，达到气密封口目。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘合剂在合成路线,工艺配方等方进行了讨论,并对该种粘合剂组分对其在粘度和干燥速度等方影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合剂为壳新型颜料包覆体染色新探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头粘合起来。

B-the layers of wood together with glue.

用乳胶把一层层木板粘合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制，全粉末直接压片的干燥粘合，胶囊填充,，湿法造粒粘合和着色的延展。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要粘合妥当。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和粘合性。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的和机理也用于压片的粘合成型。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机械性能、工艺性能、粘合性能及在制冷压缩机密封中的应用。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏合同纸板表面的黏合形成一个集合，这种粘合本身的粘合称为凝聚粘合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量粘度,来接判断RF树脂的粘合性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合的主要成份之一,它的结构及合成工艺条件决定了该类粘合性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合的流动性和产品的物理机械性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘合，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘合在合成路线,工艺配方等方面进行了讨论,并对该种粘合的组对其在粘度和干燥速度等方面的影响进行了析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合为壳的新型颜料包覆体染色新的探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头粘合起来。

B-the layers of wood together with glue.

用乳胶把层层木板粘合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制剂，全粉末直接压片的干燥粘合剂，胶囊填充剂,崩解剂，湿法造粒粘合剂的延展剂。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确方正，且整体要粘合妥当。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性粘合性。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的机理也用于压片的粘合型。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机械性能、工艺性能、粘合性能及在制冷压缩机密封中的应用。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏合剂同纸板表面的黏合剂间形集合，这种粘合本身分子间的粘合称为凝聚粘合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的间苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量粘度,来间接判断RF树脂的粘合性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂的主要份之,它的结构及合工艺条件决定了该类粘合剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性产品的物理机械性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘合，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘合剂在合路线,工艺配方等方面进行了讨论,并对该种粘合剂的组分对其在粘度干燥速度等方面的影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合剂为壳的新型颜料包覆体染新的探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头粘起来。

B-the layers of wood together with glue.

用乳胶把一层层木板粘起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制，全粉末直接压片的干燥粘，胶囊填充,崩解，湿法造粒粘和着色的延展。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必和方正，且整体要粘妥当。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和粘性。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的和机理也用于压片的粘成型。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机械性能、工艺性能、粘性能及在制冷压缩机密封中的应用。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏纸板表面的黏间形成一个集，这种粘本身分子间的粘称为凝聚粘。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的间苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量粘度,来间接判断RF树脂的粘性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘的主要成份之一,它的结构及成工艺条件决定了该类粘性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘的流动性和产品的物理机械性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘在成路线,工艺配方等方面进行了讨论,并对该种粘的组分对其在粘度和干燥速度等方面的影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘为壳的新型颜料包覆体染色新的探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头粘合起来。

B-the layers of wood together with glue.

用乳胶把一层层木板粘合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固制剂，全粉末直接压片的干燥粘合剂，胶囊填充剂,崩解剂，湿法造粒粘合剂和着色的延展剂。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，要粘合妥当。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和粘合性。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的和机理也用于压片的粘合成型。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机械性能、工艺性能、粘合性能及在制冷压缩机密封中的应用。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗板的黏合剂同板表面的黏合剂间形成一个集合，这种粘合本身分子间的粘合称为凝聚粘合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的间苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量粘度,来间接判断RF树脂的粘合性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂的主要成份之一,它的结构及合成工艺条件决定了该类粘合剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂的流动性和产品的物理机械性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘合，达气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝板专用粘合剂在合成路线,工艺配方等方面进行了讨论,并对该种粘合剂的组分对其在粘度和干燥速度等方面的影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合剂为壳的新型颜料包覆染色新的探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头粘合起来。

B-the layers of wood together with glue.

用乳胶把一层层木板粘合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制剂，全粉末直接压片干燥粘合剂，胶囊填充剂,崩解剂，湿法造粒粘合剂和着展剂。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要粘合妥当。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制钠—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面润湿性和粘合性。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大和机理也用于压片粘合型。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶机械性能、工艺性能、粘合性能及在制冷压缩机密封中应用。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板黏合剂同纸板表面黏合剂一个集合，这种粘合本身分子粘合称为凝聚粘合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样苯二酚-甲醛树脂(以下简称RF树脂)溶液当量粘度,来接判断RF树脂粘合性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂主要份之一,它结构及合工艺条件决定了该类粘合剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高粘合剂流动性和产品物理机械性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘合，达到气密封口目。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘合剂在合路线,工艺配方等方面进行了讨论,并对该种粘合剂组分对其在粘度和干燥速度等方面影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染摩擦牢度低弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合剂为壳新型颜料包覆体染新探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头来。

B-the layers of wood together with glue.

用乳胶把一层层木板来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制剂，全粉末直接压片的干燥剂，胶囊填充剂,崩解剂，湿法造粒剂和着色的延展剂。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要妥当。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和性。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的和机理也用于压片的成型。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机械性能、工艺性能、性能及在制冷压缩机密封中的应用。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏剂同纸板表面的黏剂间形成一个集，这种本身分子间的称为凝聚。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的间苯二酚-甲醛(以下简称RF)溶液的当量度,来间接判RF的性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛是铸造用聚氨酯剂的主要成份之一,它的结构及成工艺条件决定了该类剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高剂的流动性和产品的物理机械性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用剂在成路线,工艺配方等方面进行了讨论,并对该种剂的组分对其在度和干燥速度等方面的影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类剂为壳的新型颜料包覆体染色新的探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头合起来。

B-the layers of wood together with glue.

用乳胶把一层层木板合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制剂，全粉末直接压片的干燥合剂，胶囊填充剂,崩解剂，湿法造粒合剂和着色的延展剂。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要合妥当。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—萘处理液,改聚烯(PTFE)微孔膜,改善薄膜表面的润湿和合。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的和机理也用于压片的合成型。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机械、工艺、合及在制冷压缩机密封中的应用。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏合剂同纸板表面的黏合剂间形成一个集合，这种合本身分子间的合称为凝聚合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的间苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量度,来间接判断RF树脂的合。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯合剂的主要成份之一,它的结构及合成工艺条件决定了该类合剂。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高合剂的流动和产品的物理机械。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地合，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用合剂在合成路线,工艺配方等方面进行了讨论,并对该种合剂的组分对其在度和干燥速度等方面的影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类合剂为壳的新型颜料包覆体染色新的探索途径。

He joined two blocks of wood with glue.

他用胶水把两块木头起来。

B-the layers of wood together with glue.

用乳胶把一层层木板起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体制剂，全粉末直接压片的干剂，胶囊填充剂,崩解剂，湿法造粒剂和着色的延展剂。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要妥当。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自制的钠—萘处理液,改性四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和性。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾压中施加于颗粒增大的和机理也用于压片的成型。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶的机械性能、工艺性能、性能及在制冷压缩机密封中的应用。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板的黏剂同纸板表面的黏剂间形成一个集，这种本身分子间的称为。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样的间苯二酚-甲醛树脂(以下简称RF树脂)溶液的当量度,来间接判断RF树脂的性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用氨酯剂的主要成份之一,它的结构及成工艺条件决定了该类剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在压缩模塑工艺中，增加预热、预压工序，提高剂的流动性和产品的物理机械性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖的容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地，达到气密封口的目的。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用剂在成路线,工艺配方等方面进行了讨论,并对该种剂的组分对其在度和干速度等方面的影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低的弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类剂为壳的新型颜料包覆体染色新的探索途径。