Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉粒状物质一个重要理化指标,但在测过程中由于细小微粉易结“团块”并黏附在器壁或搅拌桨上,会影响测结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味合成方法和工艺条件,此工艺已扩大到几级,可满足于火工药剂批生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶结构翡翠玉件表面或多或少存在一些特殊微观形貌,它们是一定内部结构、构造在不同加工条件下必然反映,即表面组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统由旋转造粒机头和钢带冷却机组成，造粒机头将物料成颗粒状，均匀分布在钢带上，随着钢带向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料的耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉粒状物质的一个重要理化指标,但在测量过于细小微粉易结“团块”并黏附在器壁搅拌桨上,会影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味酸钾的合成方法和工艺条件,此工艺已扩大到几百克量级,可满足于火工药剂的批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶结构的翡翠玉件的多少存在一些特殊的微观形貌,它们是一定内部结构、构造在不同加工条件下的必然反映,即组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统旋转造粒机头和钢带冷却机组成，造粒机头将物料成颗粒状，均匀的分布在钢带上，随着钢带的向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致的半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅粒状填料的耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉粒状物质的一个重要理化指标,但在测量过程中由于细小微粉易结“团块”并黏附在器壁或搅拌桨上,会影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味酸钾的合成方法条件,此扩大到几百克量级,可满足于火药剂的批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶结构的翡翠玉件的表面或多或少存在一些特殊的微观形貌,它们是一定内部结构、构造在不同加条件下的必然反映,即表面组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统由旋转造粒机头钢带冷却机组成，造粒机头将物料成颗粒状，均匀的分布在钢带上，随着钢带的向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致的半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出含碳化硅和填料的耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉物质的一个重要理化指标,但在测量过程中由细小微粉易结“团块”并黏附在器壁或搅拌桨上,会影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究苦味酸钾的合成方法和工艺条件,此工艺已扩大到几百克量级,可火工药剂的批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具变晶结构的翡翠玉件的表面或多或少存在一些特殊的微观形貌,它们是一定内部结构、构造在不同加工条件下的必然反映,即表面组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造系统由旋转造机头和钢带冷却机组成，造机头将物料成颗，均匀的分布在钢带上，随着钢带的向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致的半球形固态颗。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳硅和粒状填料耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉粒状物质一个重指标,但在测量过程中由于细小微粉易结“团块”并黏附在器壁或搅拌桨上,会影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味酸钾合成方法和工艺条件,此工艺已扩大到几百克量级,可满足于火工药剂批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶结构翡翠玉件表面或多或少存在一些微观形貌,它们是一定内部结构、构造在不同加工条件下必然反映,即表面组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统由旋转造粒机头和钢带冷却机组成，造粒机头将物料成颗粒状，均匀分布在钢带上，随着钢带向前运行，逐步固成型，最终形成大小、高度、外形高度均匀一致半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产碳化硅和粒状填料的耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉粒状物质的一个重要理化指标,但在测量过程中由于细小微粉易结“团块”并黏附在器壁或搅拌桨上,会影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究粒状苦味酸钾的合成方法和工艺条件,此工艺已扩大到几百克量级,可满足于火工药剂的批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶结构的翡翠玉件的面或多或少存在一些特殊的微观形貌,它们是一定内部结构、构造在不同加工条件下的必然反,面组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统由旋转造粒机头和钢带冷却机组成，造粒机头将物料成颗粒状，均匀的分布在钢带上，随着钢带的向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致的半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉粒状物质一个重要理化指标,但在测量过程中由于细小微粉易结“团块”并黏附在器壁或搅拌桨上,会影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味酸钾合成方法和工艺条件,此工艺已扩大到几百克量级,可满足于火工药剂批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶结构翡翠玉件表面或多或少存在一些特殊微观形貌,它们是一定内部结构、构造在工条件下必然反映,即表面组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—造粒系统由旋转造粒机头和钢带冷却机组成，造粒机头将物料成颗粒状，均匀分布在钢带上，随着钢带向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出了含碳化硅和粒状填料的耐热匣。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

性能是粉粒状物质的一个重要理化指标,但在测量过程中由于细小微粉易结“团块”并黏附在器壁或搅拌桨上,会影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味酸钾的合成方法和工艺条件,此工艺已扩大到几百克量级,可满足于火工药剂的批量生产。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

经系统研究发现,具粒状变晶结的翡翠玉件的表面或多或少存在一些特殊的微观形貌,它们是一定内部结、在不同加工条件下的必然反映,即表面组。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

上海精涛—粒系统由旋转粒机头和钢带冷却机组成，粒机头将物料成颗粒状，均匀的分布在钢带上，随着钢带的向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致的半球形固态颗粒。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生出了含碳化硅和粒状填料的耐热匣钵。

Dissolution characteristics is an important index for soluble powder,however,the experimental results are always irreproducible because of the fine powder's lump-formation or conglutination tendency.

溶解性能是粉粒状物质的一个重要理化指标,但在测量过程中由于细小微粉易结“团块”并黏附在器壁或搅拌,影响测量结果。

This paper has studied the technological process for preparation of grain potassium picrate (PK), which can meet the requirements of production in batches.

研究了粒状苦味酸钾的合成方法和工艺条件,此工艺已扩大到几百克量级,可满足于火工药剂的批量生。

It is discovered by systematic studies that there exist, more or less, some special tangible shapes on the surface of jadeite jade article with granular crystalloblast.

统研究发现,具粒状变晶结构的翡翠玉件的表面或多或少存在一些特殊的微观形貌,它们是一定内部结构、构造在不同加工条件下的必然反映,即表面组构。

The pastille system is consisted of rotoformer and cooler. The rotofomer drop the liquid on the belt evenly and the drop solidified as the belt is moving forward continuously.

海精涛—造粒统由旋转造粒机头和钢带冷却机组成，造粒机头将物料成颗粒状，均匀的分布在钢带，随着钢带的向前运行，逐步固化成型，最终形成大小、高度、外形高度均匀一致的半球形固态颗粒。