"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物的一种正交晶矿物,具有方解石的两种晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳化物偏析和粗大的问题，但复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热理和持久过程的碳化物演化机制以及各种碳化物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集萌，马氏体含量比较大，碳化物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界碳化物以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料的残存元素等对机用锯条的韧性有不同程度的影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物一种正交晶矿物,具有方解石两种晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽本上解决了碳化物析和粗大问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳镍基单晶高温合金在热处理和持久过程碳化物演化机制以及各种碳化物对合金持久性能影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝部应力集处萌生，该处马氏体含量比较大，碳化物及夹杂物较多，聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱异构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大马氏体组织、晶界碳化物以及沿晶界分布“第二相”组织是促使马氏体不锈钢产生裂纹主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条分齿压痕、基体碳化物状况以及材料残存元素等对机用锯条韧性有不同程度影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物正交晶矿物,具有方解石两晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决碳化物偏析和粗大问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究含微量(0.015%)碳镍基单晶高温合金在热处理和持久过程碳化物演化机制以及各碳化物对合金持久性能。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集处萌生，该处马氏体含量比较大，碳化物及夹杂物较多，氢偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大马氏体组织、晶界碳化物以及沿晶界分布“第二相”组织是促使马氏体不锈钢产生裂纹主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条分齿压痕、基体碳化物状况以及材料残存元素等对机用锯条韧性有不同程度。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结富钙的一种正交矿,具有方解石的两种态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了偏析和粗大的问题，但其工艺复杂，成本过，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)的镍基温合金在热处理和持久过程的演机制以及各种对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集处萌生，该处马氏体含量比较大，及夹杂较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催剂可以分为两类,过渡金属双功能催剂和过渡金属氮、和氧催剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、界以及沿界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体状况以及材料的残存元素等对机用锯条的韧性有不同程度的影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙物一种正交晶矿物,具有方解石两种晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了物偏析和粗大问题，但其工艺复杂，成本高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)镍基单晶高温合金在热处理和持物演机制以及各种物对合金持性能影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集处萌生，该处马氏体含量比较大，物及夹杂物较多，氢偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催剂可以分为两类,渡金属双功能催剂和渡金属氮物、物和氧物催剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大马氏体组织、晶界物以及沿晶界分布“第二相”组织是促使马氏体不锈钢产生裂纹主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条分齿压痕、基体物状况以及材料残存元素等对机用锯条韧性有不同度影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物的一种正交晶矿物,具有方解石的两种晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从解决了碳化物偏析和粗大的问题，但其工艺复杂，成过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程的碳化物演化机制以及各种碳化物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝部应力集处萌生，该处马氏体含量比大，碳化物及夹杂物，的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱异构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界碳化物以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料的残存元素等对机用锯条的韧性有不同程度的影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物的一种正交晶矿物,具有方解石的两种晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳化物偏析和粗大的问题，但其工艺，本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热理和持久过程的碳化物演化机制以及各种碳化物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集生，该马氏体含量比较大，碳化物及夹物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界碳化物以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料的残存元素等对机用锯条的韧性有不同程度的影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物的一种正交晶矿物,具有方解石的两种晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从本上解决了碳化物偏析和粗大的问题，但其工艺复杂，成本过高，应限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程的碳化物演化机制以及各种碳化物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在部应力集处萌生，该处马氏体含量比较大，碳化物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界碳化物以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机锯条的分齿压痕、基体碳化物状况以及材料的残存元素等对机锯条的韧性有不同程度的影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物一正交晶矿物,具有方解石两晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳化物偏析和粗大问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一量(0.015%)碳镍基单晶高温合金在热处理和持久过程碳化物演化机制以及各碳化物对合金持久影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集处萌生，该处马氏体量比较大，碳化物及夹杂物较多，氢偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化剂可以分为两类,过渡金属双功催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大马氏体组织、晶界碳化物以及沿晶界分布“第二相”组织是促使马氏体不锈钢产生裂纹主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条分齿压痕、基体碳化物状况以及材料残存元素等对机用锯条韧有不同程度影响。