In addition our company can produce according to different user requirements specification hardboard.

另外我公司可根据户要求生产不同规格硬板。

Dyewood is a dense Indian hardwood.

染料木是一种硬印度产硬木。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采烧结碳化新工艺制取的硬合金刀片进行了切削试验。

Common seal the shell is made from the book stereoplasm paerboard, soft cover, the nucleus Raphe Magnus paper etc.

常见的书封壳是由硬纸板、软封面、中缝纸等加工而成。

It has properties of hardening after malleablization,arc welding and impact resistance.It can grind but can not machining demagnitized steel-bonded carbide.

具有加工硬化、电弧烛接和耐冲击的特，可磨削但不可机械无加工磁的钢结硬合金。

Ebonite is one kind of special rubber product with high strength, high modulus, high hardness and fine unnotched impact resistance.

硬橡胶是一种具有高强度、高硬度、高模量以及良好无缺口抗冲击强度的特种橡胶制品。

An attempt has been made to follow the scientific and technological steps associated with the production of fine grained hardmetal.

在回顾硬合金材料的历史发展和现状的基础上，重点介绍了在该领域中上海材料研究所取得的典型实际成果及工业概况。

The result shows that inspecting cabtyre sheathing by ultrasonic is feasible, and the immersion method would be the most reasonable one.

提出了采水浸法及聚焦探头是比较合理的探伤方法，同时为超声波于硬橡胶材料的量检测提供了一定的依据。

The characteristic and distinguished method of two classificatory cemented carbide binder is expatiated.It is recommended that GBY is a new cemented carbide binder.

阐述了两大类硬合金成形剂的特点和区分方法,介绍了一种新型硬合金成形剂-GBY。

Taking the superfinishing of thin-wall hole machining as an example, the design and application of combined carbide core drill and reamer are introduced.

以本厂簿壁孔精加工为例，介绍了硬合金扩铰复合刀具的设计、结构参数、使情况及效果。

Its Hard products is widely used as electric stove hearth sets in lab and wall,suspend ceiling brick,hollow brick,fire bulkhead muffle board,hot dozzle,nozzle etc.

硬制品作实验电炉全炉膛件及陶瓷窖墙体、吊顶砖、孔砖、挡火隔焰板、保温帽、口、套等。

In addition our company can produce according to different user requirements specification hardboard.

另外我公司可根据用户要求生产不同规格硬质纤维板。

Dyewood is a dense Indian hardwood.

染料木是一种硬质印度产硬木。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳化新工艺制取硬质刀片进行了切削试验。

Common seal the shell is made from the book stereoplasm paerboard, soft cover, the nucleus Raphe Magnus paper etc.

常封壳是由硬质纸板、软质封面、中缝纸等加工而成。

It has properties of hardening after malleablization,arc welding and impact resistance.It can grind but can not machining demagnitized steel-bonded carbide.

具有加工硬化、电弧烛接和耐冲击特，可磨削但不可机械无加工磁钢结硬质。

Ebonite is one kind of special rubber product with high strength, high modulus, high hardness and fine unnotched impact resistance.

硬质橡胶是一种具有高强度、高硬度、高模量以及良好无缺口抗冲击强度特种橡胶制品。

An attempt has been made to follow the scientific and technological steps associated with the production of fine grained hardmetal.

在回顾硬质料历史发展和现状基础上，重点介绍了在该领域中上海料研究所取得典型实际成果及工业应用概况。

The result shows that inspecting cabtyre sheathing by ultrasonic is feasible, and the immersion method would be the most reasonable one.

提出了采用水浸法及聚焦探头是比较理探伤方法，同时为超声波应用于硬质橡胶料质量检测提供了一定依据。

The characteristic and distinguished method of two classificatory cemented carbide binder is expatiated.It is recommended that GBY is a new cemented carbide binder.

阐述了两大类硬质成形剂特点和区分方法,介绍了一种新型硬质成形剂-GBY。

Taking the superfinishing of thin-wall hole machining as an example, the design and application of combined carbide core drill and reamer are introduced.

以本厂簿壁孔精加工为例，介绍了硬质扩铰复刀具设计、结构参数、使用情况及应用效果。

Its Hard products is widely used as electric stove hearth sets in lab and wall,suspend ceiling brick,hollow brick,fire bulkhead muffle board,hot dozzle,nozzle etc.

硬质制品用作实验电炉全纤炉膛件及陶瓷窖用墙体、吊顶砖、孔砖、挡火隔焰板、保温帽、口、套等。

In addition our company can produce according to different user requirements specification hardboard.

另外我公司可根据用户要求生产不同规格硬质纤维板。

Dyewood is a dense Indian hardwood.

染料种硬质印度产硬。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳化新工艺制取的硬质合金刀片进行了切削试验。

Common seal the shell is made from the book stereoplasm paerboard, soft cover, the nucleus Raphe Magnus paper etc.

常见的书封壳由硬质纸板、软质封面、中缝纸等加工而。

It has properties of hardening after malleablization,arc welding and impact resistance.It can grind but can not machining demagnitized steel-bonded carbide.

具有加工硬化、电弧烛接和耐冲击的特，可磨削但不可机械无加工磁的钢结硬质合金。

Ebonite is one kind of special rubber product with high strength, high modulus, high hardness and fine unnotched impact resistance.

硬质橡胶种具有高强度、高硬度、高模量以及良好无缺口抗冲击强度的特种橡胶制品。

An attempt has been made to follow the scientific and technological steps associated with the production of fine grained hardmetal.

在回顾硬质合金材料的历史发展和现状的基础上，重点介绍了在该领域中上海材料研究所取得的典型果及工业应用概况。

The result shows that inspecting cabtyre sheathing by ultrasonic is feasible, and the immersion method would be the most reasonable one.

提出了采用水浸法及聚焦探头比较合理的探伤方法，同时为超声波应用于硬质橡胶材料的质量检测提供了定的依据。

The characteristic and distinguished method of two classificatory cemented carbide binder is expatiated.It is recommended that GBY is a new cemented carbide binder.

阐述了两大类硬质合金形剂的特点和区分方法,介绍了种新型硬质合金形剂-GBY。

Taking the superfinishing of thin-wall hole machining as an example, the design and application of combined carbide core drill and reamer are introduced.

以本厂簿壁孔精加工为例，介绍了硬质合金扩铰复合刀具的设计、结构参数、使用情况及应用效果。

Its Hard products is widely used as electric stove hearth sets in lab and wall,suspend ceiling brick,hollow brick,fire bulkhead muffle board,hot dozzle,nozzle etc.

硬质制品用作验电炉全纤炉膛件及陶瓷窖用墙体、吊顶砖、孔砖、挡火隔焰板、保温帽、口、套等。

In addition our company can produce according to different user requirements specification hardboard.

另外我公司可根据用户要求生产不同规格硬质纤维板。

Dyewood is a dense Indian hardwood.

染料木是一种硬质印产硬木。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳新工艺制取的硬质合金刀片进行了切削试验。

Common seal the shell is made from the book stereoplasm paerboard, soft cover, the nucleus Raphe Magnus paper etc.

常见的书封壳是由硬质纸板、软质封面、中缝纸等加工而成。

It has properties of hardening after malleablization,arc welding and impact resistance.It can grind but can not machining demagnitized steel-bonded carbide.

具有加工硬、烛接和耐冲击的特，可磨削但不可机械无加工磁的钢结硬质合金。

Ebonite is one kind of special rubber product with high strength, high modulus, high hardness and fine unnotched impact resistance.

硬质橡胶是一种具有强、硬、量以及良好无缺口抗冲击强的特种橡胶制品。

An attempt has been made to follow the scientific and technological steps associated with the production of fine grained hardmetal.

在回顾硬质合金材料的历史发展和现状的基础上，重点介绍了在该领域中上海材料研究所取得的典型实际成果及工业应用概况。

The result shows that inspecting cabtyre sheathing by ultrasonic is feasible, and the immersion method would be the most reasonable one.

提出了采用水浸法及聚焦探头是比较合理的探伤方法，同时为超声波应用于硬质橡胶材料的质量检测提供了一定的依据。

The characteristic and distinguished method of two classificatory cemented carbide binder is expatiated.It is recommended that GBY is a new cemented carbide binder.

阐述了两大类硬质合金成形剂的特点和区分方法,介绍了一种新型硬质合金成形剂-GBY。

Taking the superfinishing of thin-wall hole machining as an example, the design and application of combined carbide core drill and reamer are introduced.

以本厂簿壁孔精加工为例，介绍了硬质合金扩铰复合刀具的设计、结构参数、使用情况及应用效果。

Its Hard products is widely used as electric stove hearth sets in lab and wall,suspend ceiling brick,hollow brick,fire bulkhead muffle board,hot dozzle,nozzle etc.

硬质制品用作实验炉全纤炉膛件及陶瓷窖用墙体、吊顶砖、孔砖、挡火隔焰板、保温帽、口、套等。

In addition our company can produce according to different user requirements specification hardboard.

另外我公司可根据用户要求生不同规格质纤维板。

Dyewood is a dense Indian hardwood.

染料是一种质印度。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳化新工艺制取的质合金刀片进行了切削试验。

Common seal the shell is made from the book stereoplasm paerboard, soft cover, the nucleus Raphe Magnus paper etc.

常见的书封壳是由质纸板、软质封面、中缝纸等加工而成。

It has properties of hardening after malleablization,arc welding and impact resistance.It can grind but can not machining demagnitized steel-bonded carbide.

具有加工化、电弧烛接和耐冲击的特，可磨削但不可机械无加工磁的钢结质合金。

Ebonite is one kind of special rubber product with high strength, high modulus, high hardness and fine unnotched impact resistance.

质橡胶是一种具有高强度、高度、高模量以及良好无缺口抗冲击强度的特种橡胶制品。

An attempt has been made to follow the scientific and technological steps associated with the production of fine grained hardmetal.

在回顾质合金材料的历史发展和现状的基础上，重点介绍了在该领域中上海材料所取得的典型实际成果及工业应用概况。

The result shows that inspecting cabtyre sheathing by ultrasonic is feasible, and the immersion method would be the most reasonable one.

提出了采用水浸法及聚焦探头是比较合理的探伤方法，同时为超声波应用于质橡胶材料的质量检测提供了一定的依据。

The characteristic and distinguished method of two classificatory cemented carbide binder is expatiated.It is recommended that GBY is a new cemented carbide binder.

阐述了两大类质合金成形剂的特点和区分方法,介绍了一种新型质合金成形剂-GBY。

Taking the superfinishing of thin-wall hole machining as an example, the design and application of combined carbide core drill and reamer are introduced.

以本厂簿壁孔精加工为例，介绍了质合金扩铰复合刀具的设计、结构参数、使用情况及应用效果。

Its Hard products is widely used as electric stove hearth sets in lab and wall,suspend ceiling brick,hollow brick,fire bulkhead muffle board,hot dozzle,nozzle etc.

质制品用作实验电炉全纤炉膛件及陶瓷窖用墙体、吊顶砖、孔砖、挡火隔焰板、保温帽、口、套等。

In addition our company can produce according to different user requirements specification hardboard.

另外我公司可根据用户要求生产不硬质纤维板。

Dyewood is a dense Indian hardwood.

染料木是一种硬质印度产硬木。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳化新工艺制取的硬质合金刀片进行了切削试验。

Common seal the shell is made from the book stereoplasm paerboard, soft cover, the nucleus Raphe Magnus paper etc.

常见的书封壳是由硬质纸板、软质封面、中缝纸等加工而成。

It has properties of hardening after malleablization,arc welding and impact resistance.It can grind but can not machining demagnitized steel-bonded carbide.

具有加工硬化、电弧烛接和耐冲击的特，可磨削但不可机械无加工磁的钢结硬质合金。

Ebonite is one kind of special rubber product with high strength, high modulus, high hardness and fine unnotched impact resistance.

硬质橡胶是一种具有高强度、高硬度、高模量以及良好无缺口抗冲击强度的特种橡胶制品。

An attempt has been made to follow the scientific and technological steps associated with the production of fine grained hardmetal.

在回顾硬质合金材料的历史发展和现状的基础上，重点介绍了在该领域中上海材料研究所取得的典型实际成果及工业应用概。

The result shows that inspecting cabtyre sheathing by ultrasonic is feasible, and the immersion method would be the most reasonable one.

了采用水浸法及聚焦探头是比较合理的探伤方法，时为超声波应用于硬质橡胶材料的质量检测供了一定的依据。

The characteristic and distinguished method of two classificatory cemented carbide binder is expatiated.It is recommended that GBY is a new cemented carbide binder.

阐述了两大类硬质合金成形剂的特点和区分方法,介绍了一种新型硬质合金成形剂-GBY。

Taking the superfinishing of thin-wall hole machining as an example, the design and application of combined carbide core drill and reamer are introduced.

以本厂簿壁孔精加工为例，介绍了硬质合金扩铰复合刀具的设计、结构参数、使用情及应用效果。

Its Hard products is widely used as electric stove hearth sets in lab and wall,suspend ceiling brick,hollow brick,fire bulkhead muffle board,hot dozzle,nozzle etc.

硬质制品用作实验电炉全纤炉膛件及陶瓷窖用墙体、吊顶砖、孔砖、挡火隔焰板、保温帽、口、套等。

In addition our company can produce according to different user requirements specification hardboard.

另外我公司可根据用户要求生不同规格硬质纤维板。

Dyewood is a dense Indian hardwood.

染料木是一种硬质硬木。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳化新工艺制的硬质合金刀片进行了切削试验。

Common seal the shell is made from the book stereoplasm paerboard, soft cover, the nucleus Raphe Magnus paper etc.

常见的书封壳是由硬质纸板、软质封面、中缝纸等加工而成。

It has properties of hardening after malleablization,arc welding and impact resistance.It can grind but can not machining demagnitized steel-bonded carbide.

具有加工硬化、电弧烛接和耐冲击的特，可磨削但不可机械无加工磁的钢结硬质合金。

Ebonite is one kind of special rubber product with high strength, high modulus, high hardness and fine unnotched impact resistance.

硬质橡胶是一种具有高强、高硬、高模量以及良好无缺口抗冲击强的特种橡胶制品。

An attempt has been made to follow the scientific and technological steps associated with the production of fine grained hardmetal.

在回顾硬质合金材料的历史发展和现状的基础上，重点介绍了在该领域中上海材料研究所的典型实际成果及工业应用概况。

The result shows that inspecting cabtyre sheathing by ultrasonic is feasible, and the immersion method would be the most reasonable one.

提出了采用水浸法及聚焦探头是比较合理的探伤方法，同时为超声波应用于硬质橡胶材料的质量检测提供了一定的依据。

The characteristic and distinguished method of two classificatory cemented carbide binder is expatiated.It is recommended that GBY is a new cemented carbide binder.

阐述了两大类硬质合金成形剂的特点和区分方法,介绍了一种新型硬质合金成形剂-GBY。

Taking the superfinishing of thin-wall hole machining as an example, the design and application of combined carbide core drill and reamer are introduced.

以本厂簿壁孔精加工为例，介绍了硬质合金扩铰复合刀具的设计、结构参数、使用情况及应用效果。

Its Hard products is widely used as electric stove hearth sets in lab and wall,suspend ceiling brick,hollow brick,fire bulkhead muffle board,hot dozzle,nozzle etc.

硬质制品用作实验电炉全纤炉膛件及陶瓷窖用墙体、吊顶砖、孔砖、挡火隔焰板、保温帽、口、套等。

In addition our company can produce according to different user requirements specification hardboard.

我公司可根据用户要求生产不同规格硬质纤维板。

Dyewood is a dense Indian hardwood.

染料木是一种硬质印度产硬木。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳化新工艺制取的硬质金刀片进行了切削试验。

Common seal the shell is made from the book stereoplasm paerboard, soft cover, the nucleus Raphe Magnus paper etc.

常见的书封壳是由硬质纸板、软质封面、中缝纸等加工而成。

It has properties of hardening after malleablization,arc welding and impact resistance.It can grind but can not machining demagnitized steel-bonded carbide.

具有加工硬化、电弧烛接和耐冲击的特，可磨削但不可机械无加工磁的钢结硬质金。

Ebonite is one kind of special rubber product with high strength, high modulus, high hardness and fine unnotched impact resistance.

硬质橡胶是一种具有高强度、高硬度、高模量以及良好无缺口抗冲击强度的特种橡胶制品。

An attempt has been made to follow the scientific and technological steps associated with the production of fine grained hardmetal.

在回顾硬质金材料的历史发展和现状的基础上，重点介绍了在该领域中上海材料研究所取得的典型实际成果及工业应用概况。

The result shows that inspecting cabtyre sheathing by ultrasonic is feasible, and the immersion method would be the most reasonable one.

提出了采用水浸法及聚焦探头是比的探伤方法，同时为超声波应用于硬质橡胶材料的质量检测提供了一定的依据。

The characteristic and distinguished method of two classificatory cemented carbide binder is expatiated.It is recommended that GBY is a new cemented carbide binder.

阐述了两大类硬质金成形剂的特点和区分方法,介绍了一种新型硬质金成形剂-GBY。

Taking the superfinishing of thin-wall hole machining as an example, the design and application of combined carbide core drill and reamer are introduced.

以本厂簿壁孔精加工为例，介绍了硬质金扩铰复刀具的设计、结构参数、使用情况及应用效果。

Its Hard products is widely used as electric stove hearth sets in lab and wall,suspend ceiling brick,hollow brick,fire bulkhead muffle board,hot dozzle,nozzle etc.

硬质制品用作实验电炉全纤炉膛件及陶瓷窖用墙体、吊顶砖、孔砖、挡火隔焰板、保温帽、口、套等。

In addition our company can produce according to different user requirements specification hardboard.

另外我公司可根据用户要求生产不同规格硬质纤维板。

Dyewood is a dense Indian hardwood.

染料木是一种硬质印度产硬木。

This paper describes the cutting test of hard alloy tip produced by using the new carbusintering technique.

对采用烧结碳化新工艺制取硬质合金行了切削试验。

Common seal the shell is made from the book stereoplasm paerboard, soft cover, the nucleus Raphe Magnus paper etc.

常见书封壳是由硬质纸板、软质封面、中缝纸等加工而成。

It has properties of hardening after malleablization,arc welding and impact resistance.It can grind but can not machining demagnitized steel-bonded carbide.

具有加工硬化、电弧烛接和耐冲击特，可磨削但不可机械无加工磁钢结硬质合金。

Ebonite is one kind of special rubber product with high strength, high modulus, high hardness and fine unnotched impact resistance.

硬质橡胶是一种具有高强度、高硬度、高模量以及良好无缺口抗冲击强度特种橡胶制品。

An attempt has been made to follow the scientific and technological steps associated with the production of fine grained hardmetal.

在回顾硬质合金材料历史发展和基础上，重点介绍了在该领域中上海材料研究所取得典型实际成果及工业应用概况。

The result shows that inspecting cabtyre sheathing by ultrasonic is feasible, and the immersion method would be the most reasonable one.

提出了采用水浸法及聚焦探头是比较合理探伤方法，同时为超声波应用于硬质橡胶材料质量检测提供了一定依据。

The characteristic and distinguished method of two classificatory cemented carbide binder is expatiated.It is recommended that GBY is a new cemented carbide binder.

阐述了两大类硬质合金成形剂特点和区分方法,介绍了一种新型硬质合金成形剂-GBY。

Taking the superfinishing of thin-wall hole machining as an example, the design and application of combined carbide core drill and reamer are introduced.

以本厂簿壁孔精加工为例，介绍了硬质合金扩铰复合具设计、结构参数、使用情况及应用效果。

Its Hard products is widely used as electric stove hearth sets in lab and wall,suspend ceiling brick,hollow brick,fire bulkhead muffle board,hot dozzle,nozzle etc.

硬质制品用作实验电炉全纤炉膛件及陶瓷窖用墙体、吊顶砖、孔砖、挡火隔焰板、保温帽、口、套等。