Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出疲劳的样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

揉揉疲劳的双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤的积累最终会导致骨的疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行的疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是提高曲轴疲劳寿命的有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧度试样疲劳裂纹的“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场为激励电场来测试反铁电材料的疲劳性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成的残余压力,经力衰减后才成为影响滚动接触疲劳寿命的力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏性系数，给出了利用塑性能耗的起点确定材料疲劳极限的方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显疲劳的样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉疲劳的双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤的积累最终会导致骨的疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行的疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是高曲轴疲劳寿命的有效手。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

了制焊缝断裂韧度试样疲劳裂纹的“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场作为激励电场来测试反铁电材料的疲劳性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成的残余压应力,经工作应力衰减后才成为影响滚动接触疲劳寿命的应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求了材料的黏性系数，给了利用塑性能耗的起点确定材料疲劳极限的方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出疲劳的样子, 但他恢快。

Fisher rubbed his tired eyes.

费希尔揉揉疲劳的双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤的积累最终会导致骨的疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行的疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是提高曲轴疲劳寿命的有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧度试样疲劳裂纹的“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场作为激励电场来测试反铁电材料的疲劳性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成的残余压应力,经工作应力才成为影响滚动接触疲劳寿命的应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏性系数，给出了利用塑性能耗的起点确定材料疲劳极限的方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出疲劳样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉疲劳双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤积累最终会导致骨疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是提高曲轴疲劳有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断试样疲劳纹“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场作为激励电场来测试反铁电材料疲劳性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成残余压应力,经工作应力衰减后才成为影响滚动接触疲劳应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据分析，求出了材料黏性系数，给出了利用塑性能耗起点确定材料疲劳极限方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出疲劳的样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉疲劳的双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤的积累最终会导致骨的疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇忍受长途旅行的疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是提高曲轴疲劳寿命的有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧度试样疲劳裂纹的“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波场作为激励场来测试材料的疲劳性。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成的残余压应力,经工作应力衰减后才成为影响滚动接触疲劳寿命的应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏性系数，给出了利用塑性耗的起点确定材料疲劳极限的方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出的样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉的双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤的积累最终会导致骨的骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行的。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

此,改善铸造质量并采用氧氮化是提高曲轴寿命的有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧度试样裂纹的“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电激励电来测试反铁电材料的性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成的残余压应力,经工应力衰减后才成影响滚动接触寿命的应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏性系数，给出了利用塑性能耗的起点确定材料极限的方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出疲劳的样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉疲劳的双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤的积累最终骨的疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行的疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是提高曲轴疲劳寿命的有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧度试样疲劳裂纹的“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场作为激励电场来测试反铁电材料的疲劳性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬在滚动轴承表面形成的残余压应力,经工作应力衰减后才成为影响滚动接触疲劳寿命的应力状。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据的分析，求出了材料的黏性系数，给出了利用塑性能耗的起点确定材料疲劳极限的方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出的子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉的双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤的积累最终会导致骨的骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行的。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是提高曲轴命的有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧裂纹的“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场作为激励电场来测反铁电材料的性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚动轴承表面形成的残余压应力,经工作应力衰减后才成为影响滚动接触命的应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对验数据的分析，求出了材料的黏性系数，给出了利用塑性能耗的起点确定材料极限的方法。

Although fatigue shows readily on Carter, he bounces back quickly.

卡特虽然容易显出疲劳样子, 但他恢复得很快。

Fisher rubbed his tired eyes.

费希尔揉揉疲劳双眼。

Microdamage accumulation will finally lead to bone fatigue fracture.

显微损伤最终会导致骨疲劳骨折。

The old lady can't bear the fatigue of a long journey.

这位老妇人不能忍受长途旅行疲劳。

Therefore,the improvement on casting quality and adoption of the oxynitriding are efficiant means to increase,fatigue life of the crankshaft.

因此,改善铸造质量并采用氧氮化是提高曲疲劳寿命有效手段。

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了制厚钢板焊缝断裂韧度试样疲劳裂纹“高K比法”。

The electric fields of square electric pulse were applied as cycling fields to investigate the fatigue of the antiferroelectrics.

本文用脉冲矩形方波电场作为激励电场来测试反铁电材料疲劳性能。

The residual stress formed on the surface of rolling bearing in superfinish hard turning will influence the fatigue life of rolling contacting after stress decay.

超精硬态切削在滚表面形成残余压应力,经工作应力衰减后才成为影响滚接触疲劳寿命应力状态。

After experimental data processing, material's viscousness coefficient was acquired and a new method to determine fatigue limit by the threshold of plasticity energy dissipation was given.

通过对试验数据分析，求出了材料黏性系数，给出了利用塑性能耗起点确定材料疲劳极限方法。