The soak pot with door turning device was designed for Jilin charry product limited company.

带开门装置的渍罐是为吉林炭素股份有限公司设计的渍电极设备。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究苹果脯生产中护色、抽空处理、渍等关键工序对产品质量的影响。

One new solvent free impregnating resin based on unsaturated polyester with modified diphenylene ether is prepared.

以改性二苯醚树脂为原料，合成一种新颖不饱和聚酯型无溶剂渍绝缘漆。

Joss paper productions usually involve cold-soea process, followed by beater defibration and paper forming on cylinder machines.

信仰一般采冷碱法渍竹片，再经打浆抄而成。

Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method

塑料.非泡沫塑料的密度测定方法.第一部分:渍法、液体比重瓶法和滴定法.

The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.

极间介质为易渍的表面粗化聚丙薄膜，特别提高量电器的可靠性。

A biotemplate technique was emplored to prepare biomorphic ZnO, using eggshell membrane (ESM) as the template which is infiltrated with zinc alkoxide solution and followed by calcination treatment.

摘要以鸡蛋壳内膜为模板，通过简单环保的液相渍技术结合热处理工艺制备具有蛋膜分级结构特征的氧化锌微纤维材料。

The soak pot with door turning device was designed for Jilin charry product limited company.

带开门装置的浸渍罐是为吉林炭素股份有限公司设计的用于浸渍电极设备。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

One new solvent free impregnating resin based on unsaturated polyester with modified diphenylene ether is prepared.

以改性二苯醚树脂为原料，合成了一种新颖不饱和无溶剂浸渍绝缘漆。

Joss paper productions usually involve cold-soea process, followed by beater defibration and paper forming on cylinder machines.

信仰一般采冷碱法浸渍竹片，浆抄而成。

Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method

塑料.非泡沫塑料的密度测定方法.第一部分:浸渍法、液体比重瓶法和滴定法.

The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.

极间介质为易于浸渍的表面粗化丙薄膜，特别提高了大容量电容器的可靠性。

A biotemplate technique was emplored to prepare biomorphic ZnO, using eggshell membrane (ESM) as the template which is infiltrated with zinc alkoxide solution and followed by calcination treatment.

摘要以鸡蛋壳内膜为模板，通过简单环保的液相浸渍技术结合热处理工艺制备具有蛋膜分级结构特征的氧化锌微纤维材料。

The soak pot with door turning device was designed for Jilin charry product limited company.

带开门装置的浸渍罐是为吉林炭素股份有限公司设计的用于浸渍电极设备。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

One new solvent free impregnating resin based on unsaturated polyester with modified diphenylene ether is prepared.

以改性二苯醚树脂为原料，合成一种新颖不饱和聚酯型无溶剂浸渍绝缘漆。

Joss paper productions usually involve cold-soea process, followed by beater defibration and paper forming on cylinder machines.

信仰一般采冷碱法浸渍竹片，再经打浆抄而成。

Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method

塑料.非泡沫塑料的密度测定方法.第一部分:浸渍法、液体比重瓶法和滴定法.

The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.

极间介质为易于浸渍的化聚丙薄膜，特别提高大容量电容器的可靠性。

A biotemplate technique was emplored to prepare biomorphic ZnO, using eggshell membrane (ESM) as the template which is infiltrated with zinc alkoxide solution and followed by calcination treatment.

摘要以鸡蛋壳内膜为模板，通过简单环保的液相浸渍技术结合热处理工艺制备具有蛋膜分级结构特征的氧化锌微纤维材料。

The soak pot with door turning device was designed for Jilin charry product limited company.

带开门装置的浸罐是为吉林炭素股份有限公司设计的用于浸设备。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸等关键工序对产品质量的影响。

One new solvent free impregnating resin based on unsaturated polyester with modified diphenylene ether is prepared.

以改性二苯醚树脂为原料，合成了一种新颖不饱和聚酯型无溶剂浸绝缘漆。

Joss paper productions usually involve cold-soea process, followed by beater defibration and paper forming on cylinder machines.

信仰一般采冷碱法浸竹片，再经打浆抄而成。

Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method

塑料.非泡沫塑料的密度测定方法.第一部分:浸法、液体比重瓶法和滴定法.

The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.

间介质为易于浸的表面粗化聚丙薄膜，特了大容量容器的可靠性。

A biotemplate technique was emplored to prepare biomorphic ZnO, using eggshell membrane (ESM) as the template which is infiltrated with zinc alkoxide solution and followed by calcination treatment.

摘要以鸡蛋壳内膜为模板，通过简单环保的液相浸技术结合热处理工艺制备具有蛋膜分级结构特征的氧化锌微纤维材料。

The soak pot with door turning device was designed for Jilin charry product limited company.

带开门装置的浸渍罐是为吉林炭素股份有限公司设计的用于浸渍电极设备。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

One new solvent free impregnating resin based on unsaturated polyester with modified diphenylene ether is prepared.

以改醚树脂为原料，合成了一种新颖不饱和聚酯型无溶剂浸渍绝缘漆。

Joss paper productions usually involve cold-soea process, followed by beater defibration and paper forming on cylinder machines.

信仰一般采冷碱法浸渍竹片，再经打浆抄而成。

Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method

塑料.非泡沫塑料的密度测法.第一部分:浸渍法、液体比重瓶法和滴法.

The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.

极间介质为易于浸渍的表面粗化聚丙薄膜，特别提高了大容量电容器的可靠。

A biotemplate technique was emplored to prepare biomorphic ZnO, using eggshell membrane (ESM) as the template which is infiltrated with zinc alkoxide solution and followed by calcination treatment.

摘要以鸡蛋壳内膜为模板，通过简单环保的液相浸渍技术结合热处理工艺制备具有蛋膜分级结构特征的氧化锌微纤维材料。

The soak pot with door turning device was designed for Jilin charry product limited company.

带开门装置的浸渍罐是为吉林炭素股份有限公司设计的用于浸渍电极设备。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

One new solvent free impregnating resin based on unsaturated polyester with modified diphenylene ether is prepared.

以改性二苯醚树脂为原料，合成了一种新颖不饱和酯型无溶剂浸渍绝缘漆。

Joss paper productions usually involve cold-soea process, followed by beater defibration and paper forming on cylinder machines.

信仰一般采冷碱法浸渍竹片，再经打浆抄而成。

Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method

塑料.非泡沫塑料的密度测定方法.第一部分:浸渍法、液体比重瓶法和滴定法.

The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.

极间介质为易于浸渍的表面粗化膜，特别提高了大容量电容器的可靠性。

A biotemplate technique was emplored to prepare biomorphic ZnO, using eggshell membrane (ESM) as the template which is infiltrated with zinc alkoxide solution and followed by calcination treatment.

摘要以鸡蛋壳内膜为模板，通过简单环保的液相浸渍技术结合热处理工艺制备具有蛋膜分级结构特征的氧化锌微纤维材料。

The soak pot with door turning device was designed for Jilin charry product limited company.

带开门装置的浸渍罐是为吉林炭素股份有限公司设计的用于浸渍电极设备。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

One new solvent free impregnating resin based on unsaturated polyester with modified diphenylene ether is prepared.

以改性二苯为原料，合成了一种新颖不饱和聚酯型无溶剂浸渍绝缘漆。

Joss paper productions usually involve cold-soea process, followed by beater defibration and paper forming on cylinder machines.

信仰一般采冷碱法浸渍竹片，再经打浆抄而成。

Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method

塑料.非泡沫塑料的定方法.第一部分:浸渍法、液体比重瓶法和滴定法.

The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.

极间介质为易于浸渍的表面粗化聚丙薄膜，特别提高了大容量电容器的可靠性。

A biotemplate technique was emplored to prepare biomorphic ZnO, using eggshell membrane (ESM) as the template which is infiltrated with zinc alkoxide solution and followed by calcination treatment.

摘要以鸡蛋壳内膜为模板，通过简单环保的液相浸渍技术结合热处理工艺制备具有蛋膜分级结构特征的氧化锌微纤维材料。

The soak pot with door turning device was designed for Jilin charry product limited company.

带开门装置的浸渍罐是为吉林炭素股份有限公司设计的用于浸渍电极设备。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸渍等关键工序对产品质量的影响。

One new solvent free impregnating resin based on unsaturated polyester with modified diphenylene ether is prepared.

以改性二苯醚树脂为原料，合成了一种新颖不饱和聚酯型无溶剂浸渍绝。

Joss paper productions usually involve cold-soea process, followed by beater defibration and paper forming on cylinder machines.

仰一碱法浸渍竹片，再经打浆抄而成。

Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method

塑料.非泡沫塑料的密度测定方法.第一部分:浸渍法、液体比重瓶法和滴定法.

The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.

极间介质为易于浸渍的表面粗化聚丙薄膜，特别提高了大容量电容器的可靠性。

A biotemplate technique was emplored to prepare biomorphic ZnO, using eggshell membrane (ESM) as the template which is infiltrated with zinc alkoxide solution and followed by calcination treatment.

摘要以鸡蛋壳内膜为模板，通过简单环保的液相浸渍技术结合热处理工艺制备具有蛋膜分级结构特征的氧化锌微纤维材料。

The soak pot with door turning device was designed for Jilin charry product limited company.

带开门装置的浸罐是为吉林炭素股份有限公司设计的用于浸电极设备。

The effect of sulphuring, vacuum treatment and soaking on the quality of candied apples was studied.

本文研究了苹果脯生产中护色、抽空处理、浸等关键工序对产品质量的影响。

One new solvent free impregnating resin based on unsaturated polyester with modified diphenylene ether is prepared.

以改性二苯醚树脂为原料，合成了一种新颖不饱和聚酯型无溶剂浸绝缘漆。

Joss paper productions usually involve cold-soea process, followed by beater defibration and paper forming on cylinder machines.

信仰一般采冷碱法浸竹片，再经打浆抄而成。

Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method

塑料.非泡沫塑料的密度测定方法.第一部分:浸法、液体比重瓶法和滴定法.

The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.

极间介质为易于浸的表面粗化聚丙薄膜，特别提高了大容量电容器的可靠性。

A biotemplate technique was emplored to prepare biomorphic ZnO, using eggshell membrane (ESM) as the template which is infiltrated with zinc alkoxide solution and followed by calcination treatment.

摘要以鸡蛋壳内膜为模板，通过简单环保的液相浸结合热处理工艺制备具有蛋膜分级结构特征的氧化锌微纤维材料。