This water is forced into the boiler by the feed pump.

用水泵将水压入锅炉。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场采用千斤顶进行组对、焊接、热处理、水压验,同时对如何解决塔段出现椭圆变形超标的问题进行阐述。

Hydrotest report in english for each individual line item.Such hydrotest report must be approved by applicant's shanghai office before shipment effected.

每个单独产品的英文水压测。该水压测须在走货前由申请人的上办事处认可。

All double bottom is watertight and oiltight. Compressed air testing and water-pressure tests can be carried out according to the classification society and by Owner's representative.

所有双层底为水密和油密,并应要求由船东代表进行水压或气密验.

The in situ rock stress prevents the rise of confined water and water inrush for thick floor aquifuge,but for thin floor aquifuge the in situ rock stress wo.

介绍了水力压裂应力测量的原理和现场测量结果,论述了煤层底板隔水层带的阻水机理和承压水沿煤层上升的机理,以及原岩应力、水压与裂隙扩展的关系。

This device should be installed at the furthermost downstream end of the supply pipe or fixture where temporary spillage due to critical flow pressure conditions can be discharged harmlessly.

这种装置应该安装在供应管道或卫生洁具下游尽可能远，并且由于临界水压环境可能产生无害排放的暂时性喷溅的地方。

This water is forced into the boiler by the feed pump.

用泵将入锅炉。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场采用千斤顶进行组对、焊接、热处理、试验,同时对如何解决塔段出现椭圆变形超标的问题进行阐述。

Hydrotest report in english for each individual line item.Such hydrotest report must be approved by applicant's shanghai office before shipment effected.

每个单独产品的英文试报告。该试报告须在走货前由申请人的上办事处认可。

All double bottom is watertight and oiltight. Compressed air testing and water-pressure tests can be carried out according to the classification society and by Owner's representative.

所有双层底为和,应按规范要求由船东代表进行或气试验.

The in situ rock stress prevents the rise of confined water and water inrush for thick floor aquifuge,but for thin floor aquifuge the in situ rock stress wo.

介绍了力裂应力量的原理和现场量结果,论述了煤层底板隔层带的阻机理和承沿煤层上升的机理,以及原岩应力、与裂隙扩展的关系。

This device should be installed at the furthermost downstream end of the supply pipe or fixture where temporary spillage due to critical flow pressure conditions can be discharged harmlessly.

这种装置应该安装在供应管道或卫生洁具下游尽可能远，且由于临界环境可能产生无害排放的暂时性喷溅的地方。

This water is forced into the boiler by the feed pump.

用水泵将水压入锅炉。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

大型塔器现场采用千斤顶进行组对、焊接、热处理、水压试验,同时对如何解决塔段出现椭圆变形超标进行阐述。

Hydrotest report in english for each individual line item.Such hydrotest report must be approved by applicant's shanghai office before shipment effected.

每个单独产品英文水压测试报告。该水压测试报告须在走货前由申请人上办事处认可。

All double bottom is watertight and oiltight. Compressed air testing and water-pressure tests can be carried out according to the classification society and by Owner's representative.

所有双层底为水密和油密,并应按规范要求由船东代表进行水压或气密试验.

The in situ rock stress prevents the rise of confined water and water inrush for thick floor aquifuge,but for thin floor aquifuge the in situ rock stress wo.

水力压裂应力测量原理和现场测量结果,论述煤层底板隔水层带阻水机理和承压水沿煤层上升机理,以及原岩应力、水压与裂隙扩展关系。

This device should be installed at the furthermost downstream end of the supply pipe or fixture where temporary spillage due to critical flow pressure conditions can be discharged harmlessly.

这种装置应该安装在供应管道或卫生洁具下游尽可能远，并且由于临界水压环境可能产生无害排放暂时性喷溅地方。

This water is forced into the boiler by the feed pump.

用水泵将水入锅炉。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场采用千斤顶进行组对、焊接、热处理、水,同时对如何解决塔段出现椭圆变形超标的问题进行阐。

Hydrotest report in english for each individual line item.Such hydrotest report must be approved by applicant's shanghai office before shipment effected.

每个单独产品的英文水测报告。该水测报告须在走货前由申请人的上办事处认可。

All double bottom is watertight and oiltight. Compressed air testing and water-pressure tests can be carried out according to the classification society and by Owner's representative.

所有双层底为水密和油密,并应按规范要求由船东代表进行水或气密.

The in situ rock stress prevents the rise of confined water and water inrush for thick floor aquifuge,but for thin floor aquifuge the in situ rock stress wo.

介绍了水力裂应力测量的原理和现场测量结,了煤层底板隔水层带的阻水机理和承水沿煤层上升的机理,以及原岩应力、水与裂隙扩展的关系。

This device should be installed at the furthermost downstream end of the supply pipe or fixture where temporary spillage due to critical flow pressure conditions can be discharged harmlessly.

这种装置应该安装在供应管道或卫生洁具下游尽可能远，并且由于临界水环境可能产生无害排放的暂时性喷溅的地方。

This water is forced into the boiler by the feed pump.

用泵将压入锅炉。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场采用千行组对、焊接、热处理、压试验,同时对如何解决塔段出现椭圆变形超标问题行阐述。

Hydrotest report in english for each individual line item.Such hydrotest report must be approved by applicant's shanghai office before shipment effected.

每个单独产品英文压测试报告。该压测试报告须在走货前由申请人上办事处认可。

All double bottom is watertight and oiltight. Compressed air testing and water-pressure tests can be carried out according to the classification society and by Owner's representative.

所有双层底为密和油密,并应按规范要求由船东代表行压或气密试验.

The in situ rock stress prevents the rise of confined water and water inrush for thick floor aquifuge,but for thin floor aquifuge the in situ rock stress wo.

介绍了力压裂应力测量原理和现场测量结果,论述了煤层底板隔层带机理和承压沿煤层上升机理,以及原岩应力、压与裂隙扩展关系。

This device should be installed at the furthermost downstream end of the supply pipe or fixture where temporary spillage due to critical flow pressure conditions can be discharged harmlessly.

这种装置应该安装在供应管道或卫生洁具下游尽可能远，并且由于临界压环境可能产生无害排放暂时性喷溅地方。

This water is forced into the boiler by the feed pump.

用水泵将水压入锅炉。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场采用千斤顶进行组对、焊接、热处理、水压试验,同时对如何解决塔段出现形超标的问题进行阐述。

Hydrotest report in english for each individual line item.Such hydrotest report must be approved by applicant's shanghai office before shipment effected.

每个单独产品的英文水压测试报告。该水压测试报告须在走货前由申请人的上办事处认可。

All double bottom is watertight and oiltight. Compressed air testing and water-pressure tests can be carried out according to the classification society and by Owner's representative.

所有双层底为水密和油密,并按规范要求由船东代表进行水压或气密试验.

The in situ rock stress prevents the rise of confined water and water inrush for thick floor aquifuge,but for thin floor aquifuge the in situ rock stress wo.

介绍了水压测量的原理和现场测量结果,论述了煤层底板隔水层带的阻水机理和承压水沿煤层上升的机理,以及原岩、水压与隙扩展的关系。

This device should be installed at the furthermost downstream end of the supply pipe or fixture where temporary spillage due to critical flow pressure conditions can be discharged harmlessly.

这种装置该安装在供管道或卫生洁具下游尽可能远，并且由于临界水压环境可能产生无害排放的暂时性喷溅的地方。

This water is forced into the boiler by the feed pump.

用水泵将水压。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场采用千斤顶进行组对、焊接、热处、水压试验,同时对如何解决塔段出现椭圆变形超标的问题进行阐述。

Hydrotest report in english for each individual line item.Such hydrotest report must be approved by applicant's shanghai office before shipment effected.

每个单独产品的英文水压测试报告。该水压测试报告须在走货前由申请人的上办事处认可。

All double bottom is watertight and oiltight. Compressed air testing and water-pressure tests can be carried out according to the classification society and by Owner's representative.

所有双层底为水密和油密,并应按规范要求由船东代表进行水压或气密试验.

The in situ rock stress prevents the rise of confined water and water inrush for thick floor aquifuge,but for thin floor aquifuge the in situ rock stress wo.

介绍了水力压裂应力测量的原和现场测量结果,论述了煤层底板隔水层带的阻水和承压水沿煤层上升的,及原岩应力、水压与裂隙扩展的关系。

This device should be installed at the furthermost downstream end of the supply pipe or fixture where temporary spillage due to critical flow pressure conditions can be discharged harmlessly.

这种装置应该安装在供应管道或卫生洁具下游尽可能远，并且由于临界水压环境可能产生无害排放的暂时性喷溅的地方。

This water is forced into the boiler by the feed pump.

用泵将入锅炉。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器现场采用千斤顶进行组对、焊接、热处理、试验,同时对如何解决塔段出现椭圆变形超标的问题进行阐述。

Hydrotest report in english for each individual line item.Such hydrotest report must be approved by applicant's shanghai office before shipment effected.

每个单独产品的英测试报告。该测试报告须在走货前申请人的上办事处认可。

All double bottom is watertight and oiltight. Compressed air testing and water-pressure tests can be carried out according to the classification society and by Owner's representative.

所有双层底为密和油密,并应按规范要东代表进行或气密试验.

The in situ rock stress prevents the rise of confined water and water inrush for thick floor aquifuge,but for thin floor aquifuge the in situ rock stress wo.

介绍了力裂应力测量的原理和现场测量结果,论述了煤层底板隔层带的阻机理和承沿煤层上升的机理,以及原岩应力、与裂隙扩展的关系。

This device should be installed at the furthermost downstream end of the supply pipe or fixture where temporary spillage due to critical flow pressure conditions can be discharged harmlessly.

这种装置应该安装在供应管道或卫生洁具下游尽可能远，并且于临界环境可能产生无害排放的暂时性喷溅的地方。

This water is forced into the boiler by the feed pump.

用水泵将水压入锅炉。

This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

介绍了大型塔器采用千斤顶进行组对、焊接、热处理、水压试验,同时对决塔段出椭圆变形超标的问题进行阐述。

Hydrotest report in english for each individual line item.Such hydrotest report must be approved by applicant's shanghai office before shipment effected.

每个单独产品的英文水压测试报告。该水压测试报告须在走货前由申请人的上办事处认可。

All double bottom is watertight and oiltight. Compressed air testing and water-pressure tests can be carried out according to the classification society and by Owner's representative.

所有双层底为水密油密,并应按规范要求由船东代表进行水压或气密试验.

The in situ rock stress prevents the rise of confined water and water inrush for thick floor aquifuge,but for thin floor aquifuge the in situ rock stress wo.

介绍了水力压裂应力测量的原理测量结果,论述了煤层底板隔水层带的阻水机理承压水沿煤层上升的机理,以及原岩应力、水压与裂隙扩展的关系。

This device should be installed at the furthermost downstream end of the supply pipe or fixture where temporary spillage due to critical flow pressure conditions can be discharged harmlessly.

这种装置应该安装在供应管道或卫生洁具下游尽可能远，并且由于临界水压环境可能产生无害排放的暂时性喷溅的地方。