Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的,出气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮机构之各项特性的数学模式，包括压力角、曲率、运动静力，及推导系统输扭矩表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中力锚杆的力学模型,指出力锚杆实际应用中主要承受拉力、扭矩作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电机试验室在电机试验过程中选用扭矩置的情况进行介绍。该置采用阶梯轴形式,对原置进行改进,使之在满足精度的同时满足了程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮机构特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输扭矩表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中测力锚杆的力学模型,指出测力锚杆实际应用中受拉力、扭矩作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电机试验室在电机试验过程中选用扭矩测量装置的情况进行介绍。该测量装置采用阶梯轴形式,对原装置进行改进,使在满足测量精度的同时满足了测量量程较宽的求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果分析,得出气泡稳定性以及发泡倍率对刀盘扭响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮机构之各项特性分析数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输扭表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中测力锚杆力学模,指出测力锚杆实际应用中主要承受拉力、扭作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某机试验室在机试验过程中选用扭测量装置情况进行介绍。该测量装置采用阶梯轴形式,对原装置进行改进,使之在满足测量精度同时满足了测量量程较宽要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分,气泡稳定性以及发泡倍率对刀盘扭的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮机构之各项特性分的数学模式，包括压力角分、曲率分、运动静力分，及推导系统输扭表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给巷道支护中力锚杆的力学模型,指力锚杆实际应用中主要承受拉力、扭作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电机试验室在电机试验过程中选用扭装置的情况进行介绍。该装置采用阶梯轴形式,对原装置进行改进,使之在满足精度的同时满足了程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、力分析，及推导系统输扭矩表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道测力锚杆的力学模型,指出测力锚杆实际应用主要承受拉力、扭矩作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电机试验室在电机试验过程选用扭矩测量装置的情况进行介绍。该测量装置采用阶梯轴形式,对原装置进行改进,使之在满足测量精度的同时满足了测量量程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘扭矩的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸之各项特性分析的数学模式，包括压角分析、曲率分析、运动静分析，及推导系统输扭矩表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中测锚杆的学模型,指出测锚杆实际应用中主要承、扭矩作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电试验室在电试验过程中选用扭矩测量装置的情况进行介绍。该测量装置采用阶梯轴形式,对原装置进行改进,使之在满足测量精度的同时满足了测量量程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中测力锚杆的力学模型,指出测力锚杆实际应用中主要承受拉力、用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电机试验室在电机试验过程中选用测量装置的情况进行介绍。测量装置采用阶梯轴形式,对原装置进行改进,使之在满足测量精度的同时满足了测量量程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过结果的分析,得出气泡稳定性以及发泡倍率扭矩的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输扭矩表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中测力锚杆的力学模型,指出测力锚杆实际应用中主要承受拉力、扭矩作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文某大型电机在电机过程中选用扭矩测量装置的情况进行介绍。该测量装置采用阶梯轴形式,原装置进行改进,使之在满足测量精度的同时满足了测量量程较宽的要求。

Research of the influences of Foam Expansion Ratio (FER) and the stability of foam to the cutterhead torque.

通过对试验结果的分析,得出气泡稳定性以及发泡倍率对刀盘的影响规律。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立该凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系表示式。

A mechanics model of dynamometry bolt was given and it was shown that dynamometry bolt mainly bear tension and torque in real application.

给出巷道支护中测力锚杆的力学模型,指出测力锚杆实际应用中主要承受拉力、作用。

This paper introduces the torquemeter used in a testing laboratory of large-scale motor. The torquemeter with multidiameter axis meets both the requirement of measuring accuracy and universality.

本文对某大型电机试验室在电机试验过程中选用测量装置的情况进行介绍。该测量装置采用阶梯轴形式,对原装置进行改进,使之在满足测量精度的同时满足了测量量程较宽的要求。