In a10kV distribution system,when shunt ca-pacitors are switched off by vacuum circuit breakers,restrike overvoltage often occurs.

电力系统中使用真空断路器切除无功补偿用并联电容器时,容易产重燃过电压,严重影响并联电容的安。

Besides above characteristics,marine electric heat cables have better properties of mechanical intensity,inflaming retarding,oil resistance,heat resistance and germproof.

船用电热带除有加强型并联带部特性外，还具有更好的机械强度、阻燃性、耐油、耐热性和防霉菌长。

The method to check short-circuit point between parallel conductors in transformer winding by Gaussmeter and to repair fault point are introduced.

摘要介绍用高斯计来探查变压器绕组内并联导线间短路点，并对故障点进修复的方法。

The analysis results and concepts equally go for the availability analysis of the repairability system of N components connected in parallel.

一个应用实例，其分析结果和思想同样适用于N个相同部件串联及相同部件并联可修系统的可用度分析。

A prototype of high frequency induction heating power is developed by multidevice parallel connection and using power MOSFETs as the power switch.

以功率MOSFET为开关元件,采用多管并联方式研制出高频感应加热电源。

The key factors and suggestions on optimizing stiffness of Z direction have been given which will provide concernful support for further optimization of PKM.

找出影响Z向位置精度的关键因素并进优化设计,为进一步改进并联机床提供重要的依据。

In a10kV distribution system,when shunt ca-pacitors are switched off by vacuum circuit breakers,restrike overvoltage often occurs.

力系统中使用真空断路器切除无功补偿用并联容器时,容易产重压,严重影响并联容的安全运行。

Besides above characteristics,marine electric heat cables have better properties of mechanical intensity,inflaming retarding,oil resistance,heat resistance and germproof.

船用热带除有加强型并联带全部特性外，还具有更好的机械强度、阻性、耐油、耐热性防霉菌长。

The method to check short-circuit point between parallel conductors in transformer winding by Gaussmeter and to repair fault point are introduced.

摘要介绍了运用高斯计来探查变压器绕组内并联导线间短路点，并对故障点进行修复的方法。

The analysis results and concepts equally go for the availability analysis of the repairability system of N components connected in parallel.

且举了一个应用实例，其分析结果同样适用于N个相同部件串联及相同部件并联可修系统的可用度分析。

A prototype of high frequency induction heating power is developed by multidevice parallel connection and using power MOSFETs as the power switch.

以功率MOSFET为开关元件,采用多管并联方式研制出高频感应加热源。

The key factors and suggestions on optimizing stiffness of Z direction have been given which will provide concernful support for further optimization of PKM.

找出影响Z向位置精度的关键因素并进行了优化设计,为进一步改进并联机床提供重要的依据。

In a10kV distribution system,when shunt ca-pacitors are switched off by vacuum circuit breakers,restrike overvoltage often occurs.

电力系统中使用真空断路切除无功补偿用并联电容时,容易产重燃过电,严重影响并联电容安全运行。

Besides above characteristics,marine electric heat cables have better properties of mechanical intensity,inflaming retarding,oil resistance,heat resistance and germproof.

船用电热带除有加强型并联带全部特性外，还具有更械强度、阻燃性、耐油、耐热性和防霉菌长。

The method to check short-circuit point between parallel conductors in transformer winding by Gaussmeter and to repair fault point are introduced.

摘要介绍了运用高斯计来探查变组内并联导线间短路点，并对故障点进行修复方法。

The analysis results and concepts equally go for the availability analysis of the repairability system of N components connected in parallel.

且举了一个应用实例，其分析结果和思想同样适用于N个相同部件串联及相同部件并联可修系统可用度分析。

A prototype of high frequency induction heating power is developed by multidevice parallel connection and using power MOSFETs as the power switch.

以功率MOSFET为开关元件,采用多管并联方式研制出高频感应加热电源。

The key factors and suggestions on optimizing stiffness of Z direction have been given which will provide concernful support for further optimization of PKM.

找出影响Z向位置精度关键因素并进行了优化设计,为进一步改进并联床提供重要依据。

In a10kV distribution system,when shunt ca-pacitors are switched off by vacuum circuit breakers,restrike overvoltage often occurs.

电力系统中使用真空断路器切除无功补偿用电容器时,容易产重燃过电压,严重影响电容的安全运行。

Besides above characteristics,marine electric heat cables have better properties of mechanical intensity,inflaming retarding,oil resistance,heat resistance and germproof.

船用电热除有加强型全部特性外，还具有更好的机械强度、阻燃性、耐油、耐热性和防霉菌长。

The method to check short-circuit point between parallel conductors in transformer winding by Gaussmeter and to repair fault point are introduced.

摘要介绍了运用高斯计来探查变压器绕组内导线间短路，故障进行修复的方法。

The analysis results and concepts equally go for the availability analysis of the repairability system of N components connected in parallel.

且举了一个应用实例，其分析结果和思想同样适用于N个相同部件串及相同部件可修系统的可用度分析。

A prototype of high frequency induction heating power is developed by multidevice parallel connection and using power MOSFETs as the power switch.

以功率MOSFET为开关元件,采用多管方式研制出高频感应加热电源。

The key factors and suggestions on optimizing stiffness of Z direction have been given which will provide concernful support for further optimization of PKM.

找出影响Z向位置精度的关键因素进行了优化设计,为进一步改进机床提供重要的依据。

In a10kV distribution system,when shunt ca-pacitors are switched off by vacuum circuit breakers,restrike overvoltage often occurs.

电力系统中使用真空断路器切除无功补偿用联电容器时,容易产重燃过电压,严重影响联电容的安全运行。

Besides above characteristics,marine electric heat cables have better properties of mechanical intensity,inflaming retarding,oil resistance,heat resistance and germproof.

船用电热带除有加联带全部特性外，还具有更好的机械度、阻燃性、耐油、耐热性和防霉菌长。

The method to check short-circuit point between parallel conductors in transformer winding by Gaussmeter and to repair fault point are introduced.

摘要介绍了运用高斯计来探查变压器绕组内联导线间短路点，点进行修复的方法。

The analysis results and concepts equally go for the availability analysis of the repairability system of N components connected in parallel.

且举了一个应用实例，其分析结果和思想同样适用于N个相同部件串联及相同部件联可修系统的可用度分析。

A prototype of high frequency induction heating power is developed by multidevice parallel connection and using power MOSFETs as the power switch.

以功率MOSFET为开关元件,采用多管联方式研制出高频感应加热电源。

The key factors and suggestions on optimizing stiffness of Z direction have been given which will provide concernful support for further optimization of PKM.

找出影响Z向位置精度的关键因素进行了优化设计,为进一步改进联机床提供重要的依据。

In a10kV distribution system,when shunt ca-pacitors are switched off by vacuum circuit breakers,restrike overvoltage often occurs.

力系统中使用真空断路器切除无功补偿用并器时,易产重燃过压,严重影响并的安全运行。

Besides above characteristics,marine electric heat cables have better properties of mechanical intensity,inflaming retarding,oil resistance,heat resistance and germproof.

船用热带除有加强型并带全特性外，还具有更好的机械强度、阻燃性、耐油、耐热性和防霉菌长。

The method to check short-circuit point between parallel conductors in transformer winding by Gaussmeter and to repair fault point are introduced.

摘要介绍了运用高斯计来探查变压器绕组内并导线间短路点，并对故障点进行修复的方法。

The analysis results and concepts equally go for the availability analysis of the repairability system of N components connected in parallel.

且举了一个应用实例，其分析结果和思想样适用于N个相件串及相件并可修系统的可用度分析。

A prototype of high frequency induction heating power is developed by multidevice parallel connection and using power MOSFETs as the power switch.

以功率MOSFET为开关元件,采用多管并方式研制出高频感应加热源。

The key factors and suggestions on optimizing stiffness of Z direction have been given which will provide concernful support for further optimization of PKM.

找出影响Z向位置精度的关键因素并进行了优化设计,为进一步改进并机床提供重要的依据。

In a10kV distribution system,when shunt ca-pacitors are switched off by vacuum circuit breakers,restrike overvoltage often occurs.

电力系统中使用真空路切除无功补偿用并电容时,容易产重燃过电压,严重影响并电容的安全运行。

Besides above characteristics,marine electric heat cables have better properties of mechanical intensity,inflaming retarding,oil resistance,heat resistance and germproof.

船用电热带除有加强型并带全部特性外，还具有更好的机械强度、阻燃性、耐油、耐热性和防霉菌长。

The method to check short-circuit point between parallel conductors in transformer winding by Gaussmeter and to repair fault point are introduced.

摘要介绍了运用高斯计来探查变压绕组内并导线间短路点，并对故障点进行复的方法。

The analysis results and concepts equally go for the availability analysis of the repairability system of N components connected in parallel.

且举了一个应用实例，其分析结果和思想同样适用于N个相同部件串及相同部件并系统的用度分析。

A prototype of high frequency induction heating power is developed by multidevice parallel connection and using power MOSFETs as the power switch.

以功率MOSFET为开关元件,采用多管并方式研制出高频感应加热电源。

The key factors and suggestions on optimizing stiffness of Z direction have been given which will provide concernful support for further optimization of PKM.

找出影响Z向位置精度的关键因素并进行了优化设计,为进一步改进并机床提供重要的依据。

In a10kV distribution system,when shunt ca-pacitors are switched off by vacuum circuit breakers,restrike overvoltage often occurs.

电力系统中使用真空断路器切除无功补偿用并联电容器时,容易产重燃过电压,严重影响并联电容的安全运行。

Besides above characteristics,marine electric heat cables have better properties of mechanical intensity,inflaming retarding,oil resistance,heat resistance and germproof.

船用电热带除有加强型并联带全外，还具有更好的机械强度、阻燃、耐油、耐热和防霉菌长。

The method to check short-circuit point between parallel conductors in transformer winding by Gaussmeter and to repair fault point are introduced.

摘要介绍了运用高斯计来探查变压器绕组内并联导路点，并对故障点进行修复的方法。

The analysis results and concepts equally go for the availability analysis of the repairability system of N components connected in parallel.

且举了一个应用实例，其分析结果和思想同样适用于N个相同件串联及相同件并联可修系统的可用度分析。

A prototype of high frequency induction heating power is developed by multidevice parallel connection and using power MOSFETs as the power switch.

以功率MOSFET为开关元件,采用多管并联方式研制出高频感应加热电源。

The key factors and suggestions on optimizing stiffness of Z direction have been given which will provide concernful support for further optimization of PKM.

找出影响Z向位置精度的关键因素并进行了优化设计,为进一步改进并联机床提供重要的依据。

In a10kV distribution system,when shunt ca-pacitors are switched off by vacuum circuit breakers,restrike overvoltage often occurs.

电力系统中使真空断路器切除无功补偿并联电容器时,容易产重燃过电压,严重影响并联电容的安全运行。

Besides above characteristics,marine electric heat cables have better properties of mechanical intensity,inflaming retarding,oil resistance,heat resistance and germproof.

船电热带除有加强型并联带全部特外，还具有更好的机械强度、阻燃、、热和防霉菌长。

The method to check short-circuit point between parallel conductors in transformer winding by Gaussmeter and to repair fault point are introduced.

摘要介绍了运计来探查变压器绕组内并联导线间短路点，并对故障点进行修复的方法。

The analysis results and concepts equally go for the availability analysis of the repairability system of N components connected in parallel.

且举了一个应实例，其分析结果和思想同样适于N个相同部件串联及相同部件并联可修系统的可度分析。

A prototype of high frequency induction heating power is developed by multidevice parallel connection and using power MOSFETs as the power switch.

以功率MOSFET为开关元件,采多管并联方式研制出频感应加热电源。

The key factors and suggestions on optimizing stiffness of Z direction have been given which will provide concernful support for further optimization of PKM.

找出影响Z向位置精度的关键因素并进行了优化设计,为进一步改进并联机床提供重要的依据。