The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸包回转台的地脚螺栓,是设备上最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机回转阀进料装置的基础上，提出了双作用回转阀进料装置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊股份有限公司170管厂二辊回转定径机工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 SUV样车满载稳态回转试验中出现的过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证回转器是一种具有回转阻抗性能的传输元件,可用霍尔效应实现回转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双回转机构的步进电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包回转台的地脚螺栓,是设备上最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机回转阀置的基础上，提出了双作用回转阀置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊回转定径机工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态回转试验中出现的过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证回转器是一有回转阻抗性能的传输元件,可用霍尔效应实现回转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双回转机构的步电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包转台的地脚,设备上最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机转阀进料装置的基础上，提出了作用转阀进料装置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊转定径机工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态转试验中出现的过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证转一种具有转阻抗性能的传输元件,可用霍尔效应实现转。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

转机构的步进电机控制电路由TDA1521音频集成功率放大组成平衡桥式功率驱动电路，由计算机并行口经过锁存构成脉冲分配。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包回转台的地脚螺栓,是设备上最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机回转阀进料装置的基础上，提出了双作用回转阀进料装置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊回转定径机工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态回转试验中出现的过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证回转器是一种具有回转阻抗性能的传输元件,可用霍尔效应实现回转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双回转机构的步进电机控制电路由TDA1521音功率放大器组平衡桥式功率驱动电路，由计算机并行口经过锁存器构脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包回转台的地脚螺栓,是设备上最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

现有热磨机回转阀进料装置的基础上，提出了双作用回转阀进料装置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊回转定径机工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态回转试验中出现的过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证回转器是一种具有回转阻抗性能的传件,可用霍尔效应实现回转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双回转机构的步进电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包回转台的地脚螺栓,是设备上最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机回转阀进料装置的基础上，提出了双作用回转阀进料装置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限170缝钢管厂二辊回转定径机工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对SUV满载稳态回转试验中出现的过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证回转器是一种具有回转阻抗性能的传输元件,可用霍尔效应实现回转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双回转机构的步进电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包回转台的地脚螺栓,是设备上最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机回转阀进的基础上，提出了双作用回转阀进的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊回转定径机工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态回转试验中出现的过度转向趋，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证回转器是一种具有回转阻抗性能的传输元件,可用霍尔效应实现回转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双回转机构的步进电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸转台的地脚螺栓,是设备上最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨转阀料装置的基础上，提出了双作用转阀料装置的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊股份有限公司170无缝管厂二辊转定径工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态转试验中出现的过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证转器是一种具有转阻抗性能的传输元件,可用霍尔效应实现转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双转构的步控制路由TDA1521音频集成功率放大器组成平衡桥式功率驱动路，由计算并行口经过锁存器构成脉冲分配器。

The foundation bolt of conticaster steel ladle revolving table is the most critical part to the equipment.

连铸钢包回转台的地脚螺栓,是设备上最为关键的部位。

Based on the analysis of rotary valve feeding apparatus of defibrator,a design method about double rotary valve feeding device was obtained.

在分析现有热磨机回转阀进的基础上，提出了双作用回转阀进的设计思路。

The article describes the setting-up and optimalization of the process parameters for the twohigh rotary pipe sizer employed by the 170 Seamless Steel Tube Plant,Daye Special Steel Corp.Ltd.

介绍了大冶特殊钢股份有限公司170无缝钢管厂二辊回转定径机工艺数的选择和优化情况。

Abstract Aiming at the oversteering trend of a SUV prototype in the steady circular test with full load, a virtual prototype of the vehicle was built using MSC.

摘要 针对某SUV样车满载稳态回转试验中出现的过度转向趋势问题，应用MSC.

In this paper, we theoretically demonstrate the Gyrator is a kind of transmission element, and it has behaviour to gyrate impe-dandce.Finally, we find that the Gyrator is realized by Hall effect.

本文从理论上论证回转器是有回转阻抗性能的传输元件,可用霍尔效应实现回转器。

To control stepping motors, the balance bridge power drive circuit is made up by TDA1521 integrated audio power amplifier, the pulse allotter is made up by the parallel ports of computer and latches.

双回转机构的步进电机控制电路由TDA1521音频集成功率放大器组成平衡桥式功率驱动电路，由计算机并行口经过锁存器构成脉冲分配器。