Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加载你的插件!
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加载你的插件!
The relative displacement between the front and retral loading location is emphasized.
着重研究前后油缸加载点的相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载值成线性关系。
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计性能的DSP控制器
加载精度。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得到对应于初状态(即预应态)几何的结构施工放样尺寸(即零状态几何),并通过分级加载对该方法的精度进行
。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载的情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应进行分析。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们的两个铁,他的家人将独轮车火炉燃烧热量他们在卡普林的房子。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
出
一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件类插件
类将不会自动加载你
插件!
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载值成线性关系。
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能DSP控制器来提高加载精度。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得到对应于初状态(即预应态)几何
结构施工放样尺寸(即零状态几何),并通过分级加载对该方法
精度进行了检验。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载情况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙
应
进行分析。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他个铁,他
家人将独轮车火炉燃烧热量他
在卡普林
房子。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮
齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问题,欢迎向我
指正。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加你的插件!
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加点的相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加成线性关系。
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高加精度。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得到对应于初状态(即预应态)几何的结构施工放样尺寸(即零状态几何),并通过分级加
对该方法的精度进行了检验。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加的情况下,应用三维有限元分
软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应
进行分
。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加在他们的两个铁,他的家人将独轮车火炉燃烧热量他们在卡普林的房子。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加器装
,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动载你的插件!
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸载点的相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
果位移量与
载
值成线性关系。
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高载精度。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假零状态几何,而可以一次得到对应于初状态(即预应
态)几何的
施工放样尺寸(即零状态几何),并通过
载对该方法的精度进行了检验。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向载的情况下,应用三维有限元
析软件
别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应
进行
析。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材载在他们的两个铁,他的家人将独轮车火炉燃烧热量他们在卡普林的房子。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期载接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性类均由互联网资源自动生成,部
未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加载你的插件!
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点的相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载值成线性关系。
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高加载精度。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状何,而可以一次得到对
于初状
(即
)
何的结构施工放样尺寸(即零状
何),并通过分级加载对该方法的精度进行了检验。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载的情况下,用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的
进行分析。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们的两个铁,他的家人将独轮车火炉燃烧热量他们在卡普林的房子。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有期加载接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加载你的插件!
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点的相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加载值
关系。
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高能的DSP控制器来提高加载精度。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得到对应于初状态(即预应态)几何的结构施工放样尺寸(即零状态几何),并通过
级加载对该方法的精度进行了检验。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载的情况下,应用三维有析软件
别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙的应
进行
析。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们的两个铁,他的家人将独轮车火炉燃烧热量他们在卡普林的房子。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词类均由互联网资源自动生
,部
未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加你
插件!
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加点
相对位移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果位移量与加值成线
关系。
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设能
DSP控制器来提
加
精度。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得到对应于初状态(即预应态)几何
结构施工放样尺寸(即零状态几何),并通过分级加
对该方法
精度进行了检验。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加况下,应用三维有限元分析软件分别对天然牙、镍铬合金、金钯合金带桩嵌体修复牙
应
进行分析。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加在他们
两个铁,他
家人将独轮车火炉燃烧热量他们在卡普林
房子。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加器装
,从CLASSPATH 中查找该类
包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设阶段就可保证弧齿锥齿轮具有预期加
接触
能
主动设
方法,并将其用于某航空发动机中央传动弧齿锥齿轮
齿面综合。
声明:以上例句、词分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件
观点;若发现问题,欢迎向我们指正。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加载你的插件!
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点的相对。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结量与加载
值成线性关系。
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高加载精度。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得到对应于初状态(即预应态)几何的结构施工放样尺寸(即零状态几何),并通过分级加载对该方法的精度进行了检验。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载的情况下,应用三维有限元分析软件分别对、镍铬合金、金钯合金带桩嵌体修复
的应
进行分析。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们的两个铁,他的家人将独轮车火炉燃烧热量他们在卡普林的房子。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如该类被引导类加载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
Otherwise, the plugin manager class will not be able to autoload your plugin!
否则,插件管理类插件管理类将不会自动加载你的插件!
The relative displacement between the front and retral loading location is emphasized.
着重研究了前后油缸加载点的移。
Evaluations on the displacement of gnathion and gonion under different loads were made.
结果移量与加载
值成线性关系。
The second is: increases the loading precision by designing high performable DSP controller.
特点二是设计高性能的DSP控制器来提高加载精度。
Without assuming the form of unstrained state,the form of unstrained state corresponding to that of pre-stressed state can be obtained through this method directly.
该方法无需假定结构零状态几何,而可以一次得到应于初状态(即预应
态)几何的结构施工放样尺寸(即零状态几何),并通过分级加载
该方法的精度进行了检验。
Under the vertical loading condition, using three-dimension finite element analysis software investigated the stress of natural tooth, nichrome and rhotanium post inlay restoration teeth.
在垂直向加载的情况下,应用三维有限元分析软件分别天然牙、镍铬
、
钯
带桩嵌体修复牙的应
进行分析。
Eli Martinez Jr. loads a wheelbarrow with wood that his family will burn in their two iron stoves which heat their house in Capulin.
礼小马丁内斯与木材加载在他们的两个铁,他的家人将独轮车火炉燃烧热量他们在卡普林的房子。
If the class was loaded by the bootstrap class loader the set of packages loaded from CLASSPATH is searched to find the package of the class.
如果该类被引导类加载器装载,从CLASSPATH 中查找该类的包。
When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.
提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能的主动设计方法,并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。