An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要出了一种多工位薄板装配过程测点优化设计方法。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室优化设计供理论依据。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩控制器优化设计方法。

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性分析是打入桩优化设计方法关键环节。

Objective: To optimize the extraction technology of Rhodiola Sacra.

优化红景天工艺。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进了正交设计和优化。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀设计法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙显色条件进了优化。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇不同预处理方法及其真空冷冻干燥和蜜饯加工条件优化。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了优化鱼异构化制备异鱼工艺。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破设计“三化”即规范化、参数优化和计算机辅助设计化。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

优化结构、寻找新鬼臼毒素类化合物资源替代品,已成为当前进一步研究主要方向。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在仿生应用，其天然优化形状和切割角自动调节可指导地面机械仿生设计。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和优化动物细胞染色体临时制片技术。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

优化九节茶薄层鉴别色谱条件，以高鉴别灵敏度。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素菌种选育、培养条件优化和动力学研究.浙江:浙江大学,2005 Xie Z P.

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

优秀人才参与，优化了企业内部管理，也使企业更具有市场竞争力。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数优化、赝势选和交换关联项选择都对计算结果有较大影响。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验方法对肖特基器件后部封装中压焊工艺进了参数优化设计。

The opposite concepts of superior and inferior have no absolute boundary line, which is the indistinction of optimization.

优或次这一对立概念之间不存在绝对分明界限，这就是优化模糊性。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计算和群论，优化得到了较满意中位代四苯基卟啉(H2TPP)分子构型。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出一种多工位薄板装配过程测点优计方法。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究今后完善温室的优计提供理论依据。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨复合式有源消声耳罩的控制器的优计方法。

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性分析是打入桩优计方法的关键环节。

Objective: To optimize the extraction technology of Rhodiola Sacra.

优红景天的提取工艺。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进计和优。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀计法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙的显色条件进优。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论新鲜金针菇的不同预处理方法及其真空冷冻干燥和蜜饯加工条件的优。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

优鱼藤酮异构制备异鱼藤酮的工艺。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破计的“三”即规范、参数优和计算机辅助计。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

优结构、寻找新的鬼臼毒素类合物资源替代品,已成当前进一步研究的主要方向。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析臭蜣螂唇基潜在的仿生应用，其天然优的形状和切割角的自动调节可指导地面机械的仿生计。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和优动物细胞染色体的临时制片技术。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

优九节茶薄层鉴别色谱条件，以提高鉴别的灵敏度。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素的菌种选育、培养条件优和动力学研究.浙江:浙江大学,2005 Xie Z P.

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

优秀人才的参与，优企业的内部管理，也使企业更具有市场竞争力。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数的优、赝势的选取和换关联项的选择都对计算结果有较大影响。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用试验的方法对肖特基器件后部封装中的压焊工艺进参数优计。

The opposite concepts of superior and inferior have no absolute boundary line, which is the indistinction of optimization.

优或次这一对立概念之间不存在绝对分明的界限，这就是优的模糊性。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计算和群论，优得到较满意的中位取代四苯基卟啉(H2TPP)的分子构型。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出了一种多位薄板装配过程测点设计方法。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室的设计提供理论依据。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩的控制器的设计方法。

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性分析是打入桩设计方法的关键环节。

Objective: To optimize the extraction technology of Rhodiola Sacra.

红景天的提取艺。

The technics parameters wereoptimized through chiasmus.

对合成艺参数进了正交设计和。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

用均匀设计法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙的显色件进了。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇的不同预处理方法及其真空冷冻干燥和蜜饯加件的。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了鱼藤酮异构制备异鱼藤酮的艺。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破设计的“三”即规范、参数和计算机辅助设计。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

结构、寻找新的鬼臼毒素类合物资源替代品,已成为当前进一步研究的主要方向。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在的仿生应用，其天然的形状和切割角的自动调节可指导地面机械的仿生设计。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和动物细胞染色体的临时制片技术。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

九节茶薄层鉴别色谱件，以提高鉴别的灵敏度。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素的菌种选育、培养件和动力学研究.浙江:浙江大学,2005 Xie Z P.

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

秀人才的参与，了企业的内部管理，也使企业更具有市场竞争力。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数的、赝势的选取和交换关联项的选择都对计算结果有较大影响。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验的方法对肖特基器件后部封装中的压焊艺进了参数设计。

The opposite concepts of superior and inferior have no absolute boundary line, which is the indistinction of optimization.

或次这一对立概念之间不存在绝对分明的界限，这就是的模糊性。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计算和群论，得到了较满意的中位取代四苯基卟啉(H2TPP)的分子构型。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出了一种多位薄板装配过程测点优设计方法。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室的优设计提供理论依据。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩的控制器的优设计方法。

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性分析是打入桩优设计方法的关键环节。

Objective: To optimize the extraction technology of Rhodiola Sacra.

优红景天的提取。

The technics parameters wereoptimized through chiasmus.

对合参数进了正交设计和优。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀设计法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙的显色条件进了优。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇的不同预处理方法及其真空冷冻干燥和蜜饯加条件的优。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了优鱼藤酮制备鱼藤酮的。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破设计的“三”即规范、参数优和计算机辅助设计。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

优结、寻找新的鬼臼毒素类合物资源替代品,已为当前进一步研究的主要方向。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在的仿生应用，其天然优的形状和切割角的自动调节可指导地面机械的仿生设计。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和优动物细胞染色体的临时制片技术。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

优九节茶薄层鉴别色谱条件，以提高鉴别的灵敏度。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素的菌种选育、培养条件优和动力学研究.浙江:浙江大学,2005 Xie Z P.

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

优秀人才的参与，优了企业的内部管理，也使企业更具有市场竞争力。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数的优、赝势的选取和交换关联项的选择都对计算结果有较大影响。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验的方法对肖特基器件后部封装中的压焊进了参数优设计。

The opposite concepts of superior and inferior have no absolute boundary line, which is the indistinction of optimization.

优或次这一对立概念之间不存在绝对分明的界限，这就是优的模糊性。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计算和群论，优得到了较满意的中位取代四苯基卟啉(H2TPP)的分子型。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出了一种多工位薄板装配过程测点优化设方法。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室的优化设提供理论依据。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩的控制器的优化设方法。

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩分析是入桩优化设方法的关键环节。

Objective: To optimize the extraction technology of Rhodiola Sacra.

优化红景天的提取工艺。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进了正交设优化。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀设法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙的显色条件进了优化。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇的不同预处理方法及其真空冷冻干燥蜜饯加工条件的优化。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了优化鱼藤酮异构化制备异鱼藤酮的工艺。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破设的“三化”即规范化、参数优化机辅助设化。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

优化结构、寻找新的鬼臼毒素类化合物资源替代品,已成为当前进一步研究的主要方向。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在的仿生应用，其天然优化的形状切割角的自动调节指导地面机械的仿生设。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进优化动物细胞染色体的临时制片技术。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

优化九节茶薄层鉴别色谱条件，以提高鉴别的灵敏度。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素的菌种选育、培养条件优化动力学研究.浙江:浙江大学,2005 Xie Z P.

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

优秀人才的参与，优化了企业的内部管理，也使企业更具有市场竞争力。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数的优化、赝势的选取交换关联项的选择都对结果有较大影响。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验的方法对肖特基器件后部封装中的压焊工艺进了参数优化设。

The opposite concepts of superior and inferior have no absolute boundary line, which is the indistinction of optimization.

优或次这一对立概念之间不存在绝对分明的界限，这就是优化的模糊。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO群论，优化得到了较满意的中位取代四苯基卟啉(H2TPP)的分子构型。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出了一种多工位薄板装配过程测点计方法。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室的计提供理论依据。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩的控制器的计方法。

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性分析是打入桩计方法的关键环节。

Objective: To optimize the extraction technology of Rhodiola Sacra.

红景天的提取工艺。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进了正交计和。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀计法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙的显色条件进了。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇的不同预处理方法及其真空冷冻干燥和蜜饯加工条件的。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了鱼藤酮异构制备异鱼藤酮的工艺。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破计的“三”范、参数和计算机辅助计。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

结构、寻找新的鬼臼毒素类合物资源替代品,已成为当前进一步研究的主要方向。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在的仿生应用，其天然的形状和切割角的自动调节可指导地面机械的仿生计。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和动物细胞染色体的临时制片技术。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

九节茶薄层鉴别色谱条件，以提高鉴别的灵敏度。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素的菌种选育、培养条件和动力学研究.浙江:浙江大学,2005 Xie Z P.

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

秀人才的参与，了企业的内部管理，也使企业更具有市场竞争力。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数的、赝势的选取和交换关联项的选择都对计算结果有较大影响。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验的方法对肖特基器件后部封装中的压焊工艺进了参数计。

The opposite concepts of superior and inferior have no absolute boundary line, which is the indistinction of optimization.

或次这一对立概念之间不存在绝对分明的界限，这就是的模糊性。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计算和群论，得到了较满意的中位取代四苯基卟啉(H2TPP)的分子构型。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出了一种多工位薄板装配过程测点方法。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室提供理论依据。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩控制器方法。

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性分析是打入桩方法关键环节。

Objective: To optimize the extraction technology of Rhodiola Sacra.

红景天提取工艺。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进了正交。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀法对对二甲氨基苯甲醛显色法测定桃叶珊瑚甙显色条件进了。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇不同预处理方法及其真空冷冻干燥蜜饯加工条件。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了鱼藤酮异构制备异鱼藤酮工艺。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破“三”即规范、参数算机辅助。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

结构、寻找新鬼臼毒素类合物资源替代品,已成为当前进一步研究主要方向。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇基潜在仿生应用，其天然形状切割角自动调节可指导地面机械仿生。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进动物细胞染色体临时制片技术。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

九节茶薄层鉴别色谱条件，以提高鉴别灵敏度。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素菌种选育、培养条件动力学研究.浙江:浙江大学,2005 Xie Z P.

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

秀人才参与，了企业内部管理，也使企业更具有市场竞争力。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数、赝势选取交换关联项选择都对算结果有较大影响。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验方法对肖特基器件后部封装中压焊工艺进了参数。

The opposite concepts of superior and inferior have no absolute boundary line, which is the indistinction of optimization.

或次这一对立概念之间不存在绝对分明界限，这就是模糊性。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO算群论，得到了较满意中位取代四苯基卟啉(H2TPP)分子构型。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出了一种多工位薄板装配过程测点优化设计方法。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室的优化设计提供理论依据。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨了复合式有源消声耳罩的控制器的优化设计方法。

The driveability analysis is a key in the optimized design method for driven pile.

2、打性分析是打入优化设计方法的关键环节。

Objective: To optimize the extraction technology of Rhodiola Sacra.

优化红景天的提取工艺。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进了正交设计和优化。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀设计法对对二甲氨苯甲醛显色法测定桃叶珊瑚甙的显色条件进了优化。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨论了新鲜金针菇的不同预处理方法及其真空冷冻干燥和蜜饯加工条件的优化。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为了优化鱼藤酮异构化制备异鱼藤酮的工艺。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破设计的“三化”即规范化、参数优化和计助设计化。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

优化结构、寻找新的鬼臼毒素类化合物资源替代品,已成为当前进一步研究的主要方向。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析了臭蜣螂唇潜在的仿生应用，其天然优化的形状和切割角的自动调节指导地面械的仿生设计。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和优化动物细胞染色体的临时制片技术。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

优化九节茶薄层鉴别色谱条件，以提高鉴别的灵敏度。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素的菌种选育、培养条件优化和动力学研究.浙江:浙江大学,2005 Xie Z P.

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

优秀人才的参与，优化了企业的内部管理，也使企业更具有市场竞争力。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数的优化、赝势的选取和交换关联项的选择都对计结果有较大影响。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验的方法对肖特器件后部封装中的压焊工艺进了参数优化设计。

The opposite concepts of superior and inferior have no absolute boundary line, which is the indistinction of optimization.

优或次这一对立概念之间不存在绝对分明的界限，这就是优化的模糊性。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计和群论，优化得到了较满意的中位取代四苯卟啉(H2TPP)的分子构型。

An optimal sensor design method was presented for the multistation sheet metal assembly processes.

摘要提出一种多工位薄板装配过程测点优化设计方法。

This research will provide the theory basis for consummating heliogreenhouse optimized design in the future.

本研究为今后完善温室优化设计提供理依据。

The optimum design of the controller of compound active noise cancellation earmuff is discussed.

探讨复合式有源消声耳罩控制器优化设计方法。

The driveability analysis is a key in the optimized design method for driven pile.

2、基桩可打性分析是打入桩优化设计方法关键环节。

Objective: To optimize the extraction technology of Rhodiola Sacra.

优化红景天提取工艺。

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进正交设计和优化。

The absorption spectroscopic determination of aucubin by condensation with p-dimethylaminobenzaldehyde was optimized in this paper.

采用均匀设计法对对二甲氨基苯甲醛色法测定桃叶珊瑚色条件进优化。

This article discussed the optimization of vacuum freeze-drying and succade process of flammulina velutipes .

讨鲜金针菇不同预处理方法及其真空冷冻干燥和蜜饯加工条件优化。

To optimize the process of prepartion isorotenone from rotenone by using Lewis acid AlCl3 as catalyst.

为优化鱼藤酮异构化制备异鱼藤酮工艺。

Standardization, parameter optimization and computerization are introduced in the engineering of open-pit bench Masting.

露天矿台阶爆破设计“三化”即规范化、参数优化和计算机辅助设计化。

Continued research on the Podophyllum lignans is currently focused on structure optimization to generate deriv...

优化结构、寻找鬼臼毒素类化合物资源替代品,已成为当前进一步研究主要方向。

The potential applications of the clypeus in bionic cutting resistance reduction were analyzed.

最后分析臭蜣螂唇基潜在仿生应用，其天然优化形状和切割角自动调节可指导地面机械仿生设计。

Objective: Improve and optimize the method of Chromosome of zooblast.

改进和优化动物细胞染色体临时制片技术。

Objective: To improve a TLC identification condition for Glabrous Sarcandra Herb to enhance its sensitivity.

优化九节茶薄层鉴别色谱条件，以提高鉴别灵敏度。

Study on the strain improvement,culture condition optimization and fermentation kinetics for mildiomycin producing.

[10]谢志鹏.发酵法生产米多霉素菌种选育、培养条件优化和动力学研究.浙江:浙江大学,2005 Xie Z P.

Keeping Total Quality Management in mind, we were granted the ISO9002 authentification by SGS in 2000.

优秀人才参与，优化企业内部管理，也使企业更具有市场竞争力。

The calculated values are affected by lattice constant, selection of pseudopotential and selection of exchange-correlation energy.

晶格参数优化、赝势选取和交换关联项选择都对计算结果有较大影响。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验方法对肖特基器件后部封装中压焊工艺进参数优化设计。

The opposite concepts of superior and inferior have no absolute boundary line, which is the indistinction of optimization.

优或次这一对立概念之间不存在绝对分明界限，这就是优化模糊性。

MNDO calculations and group theory were carried out on tetraphenyl porphyrine(TPP) to obtain its optimum molecular geometry.

运用MNDO计算和群，优化得到较满意中位取代四苯基卟啉(H2TPP)分子构型。