Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制系统仿真,并调节器进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建模器-析器-仿真演示器于一体三器一体化建筑工程辅助设计和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数布实例解析方法和仿真方法计算出果进行比较，从而所提出仿真方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器组成部，汽车驾驶模拟器新一代实时视景系统是一个全新视景仿真和场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布和网眼布等不同种类织物仿真验证了该算法有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针仿真冷却剂系统特点，系统进行了节点划，并做了适当简化，以使其适应实时仿真需。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘基于建立裂纹转子瞬态回应动力学模型，得到了有无裂纹转子数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

析了网格密度、身用低碳钢材料塑性特性随应变率变化及焊点力学特性因素仿真果影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

PMK可编程调节器实现过程控制系统的仿真,并调节器进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建模器-结构分析器-仿真演示器于体的三器体化的建筑工程辅助设和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后个指数分布实例解析法和仿真法算出的结果进行比较，从而所提出的仿真法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器的重要组成部分，汽车驾驶模拟器新代实时视景系统是个全新的视景仿真和场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证了该算法的有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真的冷却剂系统的特点，系统进行了节点划分，并做了适当简化，以使其适应实时仿真的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到了有无裂纹转子的数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制系统的仿真,并调节器进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分实例解析方法和仿真方法计算出的结果进行比较，从而所提出的仿真方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器的重要组成部分，汽车驾驶模拟器新一代实时视景系统是一个全新的视景仿真和场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织、针织、斜纹和网眼同种类织物的仿真验证了该算法的有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真的冷却剂系统的特点，系统进行了节点划分，并做了适当简化，以使其适应实时仿真的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到了有无裂纹转子的数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编调节器实现过控制系统仿真,并调节器进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，并实现了集建建模器-结构分析器-仿真演示器于一体三器一体化建辅助设计和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例解析方法和仿真方法计算结果进行比较，从而所仿真方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器重要组成部分，汽车驾驶模拟器新一代实时视景系统是一个全新视景仿真和场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布和网眼布等不同种类织物仿真验证了该算法有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真冷却剂系统特点，系统进行了节点划分，并做了适当简化，以使其适应实时仿真需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立裂纹转子瞬态回应动力学模型，得到了有无裂纹转子数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率变化及焊点力学特性因素仿真结果影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制系统的仿真,并调节器进参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例解析方法仿真方法计算出的结果进，从而所提出的仿真方法进了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器的重要组成部分，汽车驾驶模拟器新一代实时视景系统是一个全新的视景仿真场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布网眼布等不同种类织物的仿真验证了该算法的有效性适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真的冷却剂系统的特点，系统进了节点划分，并做了适当简化，以使其适应实时仿真的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到了有无裂纹转子的数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节程控制系统的仿真,并调节进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并了集建筑建模-结构分析-仿真演示于一体的三一体化的建筑工程辅助设计和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布例解析方法和仿真方法计算出的结果进行比较，从而所提出的仿真方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟的重要组成部分，汽车驾驶模拟新一代时视景系统是一个全新的视景仿真和场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证了该算法的有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真的冷却剂系统的特点，系统进行了节点划分，并做了适当简化，以使其适应时仿真的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到了有无裂纹转子的数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制的仿真,并调节器进行参数。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

研制中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例解析方法和仿真方法计算出的结果进行比较，从而所提出的仿真方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器的重要组成部分，汽车驾驶模拟器新一代实时视是一个全新的视仿真和场管理。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证了该算法的有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真的冷却剂的特点，进行了节点划分，并做了适当简化，以使其适应实时仿真的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到了有无裂纹转子的数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编调节器实现过的仿真,并调节器进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在研中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工辅助设计和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例解析方法和仿真方法计算出的结果进行比较，从而所提出的仿真方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器的重要组成部分，汽车驾驶模拟器新一代实时视景是一个全新的视景仿真和场景管。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证了该算法的有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真的冷却剂的特点，进行了节点划分，并做了适当简化，以使其适应实时仿真的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到了有无裂纹转子的数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调实现过程控制系统仿真,并调行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建模-结构分析-仿真演示于一体三一体化建筑工程辅助设计和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例解析方法和仿真方法计算出结果行比较，从而所提出仿真方法行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟重要组成部分，汽车驾驶模拟一代实时视景系统是一个视景仿真和场景管理系统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布和网眼布等不同种类织物仿真验证了该算法有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真冷却剂系统特点，系统行了点划分，并做了适当简化，以使其适应实时仿真需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立裂纹转子瞬态回应动力学模型，得到了有无裂纹转子数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率变化及焊点力学特性因素仿真结果影响。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程统的仿真,并调节器进行参数整定。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在统研中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计和软件开发思路。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例解析方法和仿真方法计算出的结果进行比较，从而所提出的仿真方法进行了检验。

As the most important component of automobilism simulator, the newgenerated real-time visual system is a completely new visual simulation and scene management system.

作为汽车驾驶模拟器的重要组成部分，汽车驾驶模拟器新一代实时视景统是一个全新的视景仿真和场景统。

Computer simulation demonstrate that the proposed algorithm can adapt to the identification of several different kinds of fabric as woven, stockinet, damask and mesh fabric.

通过机织布、针织布、斜纹布和网眼布等不同种类织物的仿真验证了该算法的有效性和适应性。

In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.

本论文针要仿真的冷却剂统的特点，统进行了节点划分，并做了适当简化，以使其适应实时仿真的需要。

The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.

摘要基于建立的裂纹转子瞬态回应动力学模型，得到了有无裂纹转子的数值仿真解。

The effect of the mesh density, the change of dynamic plasticity property of mild steel with strain rate and the spotweld mechanical property on the simulation results is analyzed.

分析了网格密度、身用低碳钢材料塑性特性随应变率的变化及焊点力学特性因素仿真结果的影响。