This program is also suitabal for the ejection of any uncontrolled bomblet from carrier.

仿真程序也适用于所有弹道导弹子母弹抛撒轴对称子弹的无控弹道仿真。

Realizes the networked measure or control and asynchronous emluator.

实现了网络化的测控与异步仿真。

Virtul endoscopy can multi-angularly display spinal canal injury and stricture.

仿真内窥镜能多角度观察病变椎管内形态及狭窄状况。

A computerized overall forging system's model including hammerer,air hammer and forging part was developed.

开发了人一空气锤-锻件人机系统型仿真软件。

The listener sidetone rating defines the effect of interference sound on the voice quality.

背当量是在仿真量测当电话使用在吵杂环境畤由送话端回授到受话端的量。

Several women staff member is worn confuse colour to take, carry emulation emmagee, place model greatly.

数名女性工人员身穿迷彩服，携带仿真机关枪，大摆造型。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该方法实现的空视符合航海拟器的精度要求和虚拟场中漫游的实时性要求。

It is proved that the scheme is reasonable and actable according to the result of simulation.

最后对系统进行了设计和拟仿真，验证了方案的合理性和可行性。

It is found that the flexible hose easily enwind under some launching operation modes by numerical simulation.

仿真显示了在某些布放式下,软管缠绕现象发生的全过程。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制系统的仿真,并对调节器进行参数整定。

It provides a significant condition for data management of digital human body, multi-data introject and imitation and virtual technique.

为数字人体的数据管理、多种数据融合与仿真虚拟技术提供了必要条件。

In this paper,the characteristics of tripropellant rocket engine was studied in two different ways:experiment and simulation .

本文从实验、仿真两个方面对三组元液体火箭发动机推力室的工过程进行了研究。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计和软件开发思路。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了带底孔的圆筒形件成形后底孔的变形规律,在此基础上建立了带底孔的圆筒形件成形后毛料中心孔变形规律的经验公式。

The images from MPR and 3D imaging and CTVE were compared with 30 cases of urologic diseases from IVU and fiberendoscope,respectively.

分析30例泌尿系病例,分别进行多平面重组(MPR)、三维(3D)成像及CT仿真内镜(CTVE),并与(IVU)图像和膀胱纤维内镜进行比较。

A minitype wireless noise measure system is designed to act as an automonitor, which has been proved to be a practical device.

试验结果表明，该系统可以有效获得飞机的噪声数据，测试结果与仿真结果比较吻合。

The interclass difference matrix is calculated by using the fault class feature data from simulation in order to determinate the ambiguity sets.

算法利用电路仿真故障特征数据计算故障的类间差异矩阵，从而完成故障类糊集的确定。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例对解析方法和仿真方法计算出的结果进行比较，从而对所提出的仿真方法进行了检验。

And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.

该系统成功仿真了我国即将运行的先进超导托克马克实验装置EAST的装配方案,并在先进的聚变驱动次临界堆FDS-I概念设计研究中得到应用。

The steady state saturation and transient state saturation of the current transformer are theoretically analyzed and simutated under different burder at secondary side.

针对二次不同的负载，对电流互感器的稳态饱和与暂态饱和做出理论分析和仿真。

This program is also suitabal for the ejection of any uncontrolled bomblet from carrier.

仿真程序也适用于所有弹道导弹子母弹抛撒轴对称子弹无控弹道仿真。

Realizes the networked measure or control and asynchronous emluator.

实现了网络化测控与异步仿真。

Virtul endoscopy can multi-angularly display spinal canal injury and stricture.

仿真窥镜能多角度观察病变形态及狭窄状况。

A computerized overall forging system's model including hammerer,air hammer and forging part was developed.

开发了人一空气锤-锻件人机模型仿真软件。

The listener sidetone rating defines the effect of interference sound on the voice quality.

背景侧音当量是在仿真量测当电话使用在吵杂环境畤由送话端回授到受话端量。

Several women staff member is worn confuse colour to take, carry emulation emmagee, place model greatly.

数名女性工作人员身穿迷彩服，携带仿真机关枪，大摆造型。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该方法实现空视景符合航海模拟器精度要求和虚拟场景中漫游实时性要求。

It is proved that the scheme is reasonable and actable according to the result of simulation.

最后对进行了设计和模拟仿真，验证了方案合理性和可行性。

It is found that the flexible hose easily enwind under some launching operation modes by numerical simulation.

仿真显示了在某些布放操作模式下,软缠绕现象发生全过程。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制仿真,并对调节器进行参数整定。

It provides a significant condition for data management of digital human body, multi-data introject and imitation and virtual technique.

为数字人体数据理、多种数据融合与仿真虚拟技术提供了必要条件。

In this paper,the characteristics of tripropellant rocket engine was studied in two different ways:experiment and simulation .

本文从实验、仿真两个方面对三组元液体火箭发动机推力室工作过程进行了研究。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在研制中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体三器一体化建筑工程辅助设计和软件开发思路。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了带底孔圆筒形件成形后底孔变形规律,在此基础上建立了带底孔圆筒形件成形后毛料中心孔变形规律经验公式。

The images from MPR and 3D imaging and CTVE were compared with 30 cases of urologic diseases from IVU and fiberendoscope,respectively.

分析30例泌尿病例,分别进行多平面重组(MPR)、三维(3D)成像及CT仿真镜(CTVE),并与(IVU)图像和膀胱纤维镜进行比较。

A minitype wireless noise measure system is designed to act as an automonitor, which has been proved to be a practical device.

试验结果表明，该可以有效获得飞机噪声数据，测试结果与仿真结果比较吻合。

The interclass difference matrix is calculated by using the fault class feature data from simulation in order to determinate the ambiguity sets.

算法利用电路仿真故障特征数据计算故障类间差异矩阵，从而完成故障类模糊集确定。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例对解析方法和仿真方法计算出结果进行比较，从而对所提出仿真方法进行了检验。

And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.

该成功仿真了我国即将运行先进超导托克马克实验装置EAST装配方案,并在先进聚变驱动次临界堆FDS-I概念设计研究中得到应用。

The steady state saturation and transient state saturation of the current transformer are theoretically analyzed and simutated under different burder at secondary side.

针对二次侧不同负载，对电流互感器稳态饱和与暂态饱和做出理论分析和仿真。

This program is also suitabal for the ejection of any uncontrolled bomblet from carrier.

仿真程序于所有弹道导弹子母弹抛撒轴对称子弹的无控弹道仿真。

Realizes the networked measure or control and asynchronous emluator.

实现了网络化的测控与异步仿真。

Virtul endoscopy can multi-angularly display spinal canal injury and stricture.

仿真内窥镜能多角度观察病变椎管内形态及狭窄状况。

A computerized overall forging system's model including hammerer,air hammer and forging part was developed.

开发了人一空气锤-锻件人机系统模型仿真软件。

The listener sidetone rating defines the effect of interference sound on the voice quality.

背景侧音当量是在仿真量测当电话使在吵杂环境畤由送话端回授到受话端的量。

Several women staff member is worn confuse colour to take, carry emulation emmagee, place model greatly.

数名女性工作人员身穿迷彩服，携带仿真机关枪，大摆造型。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该法实现的空视景符合航海模拟器的精度要求和虚拟场景中漫游的实时性要求。

It is proved that the scheme is reasonable and actable according to the result of simulation.

最后对系统进行了设计和模拟仿真，验证了案的合理性和可行性。

It is found that the flexible hose easily enwind under some launching operation modes by numerical simulation.

仿真显示了在某些布放操作模式下,软管缠绕现象发生的全过程。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利PMK可编程调节器实现过程控制系统的仿真,并对调节器进行参数整定。

It provides a significant condition for data management of digital human body, multi-data introject and imitation and virtual technique.

为数字人体的数据管理、多种数据融合与仿真虚拟技术提供了必要条件。

In this paper,the characteristics of tripropellant rocket engine was studied in two different ways:experiment and simulation .

本文从实验、仿真两对三组元液体火箭发动机推力室的工作过程进行了研究。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计和软件开发思路。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了带底孔的圆筒形件成形后底孔的变形规律,在此基础上建立了带底孔的圆筒形件成形后毛料中心孔变形规律的经验公式。

The images from MPR and 3D imaging and CTVE were compared with 30 cases of urologic diseases from IVU and fiberendoscope,respectively.

分析30例泌尿系病例,分别进行多平重组(MPR)、三维(3D)成像及CT仿真内镜(CTVE),并与(IVU)图像和膀胱纤维内镜进行比较。

A minitype wireless noise measure system is designed to act as an automonitor, which has been proved to be a practical device.

试验结果表明，该系统可以有效获得飞机的噪声数据，测试结果与仿真结果比较吻合。

The interclass difference matrix is calculated by using the fault class feature data from simulation in order to determinate the ambiguity sets.

算法利电路仿真故障特征数据计算故障的类间差异矩阵，从而完成故障类模糊集的确定。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利一指数分布实例对解析法和仿真法计算出的结果进行比较，从而对所提出的仿真法进行了检验。

And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.

该系统成功仿真了我国即将运行的先进超导托克马克实验装置EAST的装配案,并在先进的聚变驱动次临界堆FDS-I概念设计研究中得到应。

The steady state saturation and transient state saturation of the current transformer are theoretically analyzed and simutated under different burder at secondary side.

针对二次侧不同的负载，对电流互感器的稳态饱和与暂态饱和做出理论分析和仿真。

This program is also suitabal for the ejection of any uncontrolled bomblet from carrier.

程序也适用于所有弹道导弹子母弹抛撒轴对称子弹的无控弹道。

Realizes the networked measure or control and asynchronous emluator.

实现网络化的测控与异步。

Virtul endoscopy can multi-angularly display spinal canal injury and stricture.

内窥镜能多角度观察病变椎管内形态及狭窄状况。

A computerized overall forging system's model including hammerer,air hammer and forging part was developed.

开发人一空气锤-锻件人机系统模型软件。

The listener sidetone rating defines the effect of interference sound on the voice quality.

背景侧音当量是量测当电话使用吵杂环境畤由送话端回授到受话端的量。

Several women staff member is worn confuse colour to take, carry emulation emmagee, place model greatly.

数名女性工作人员身穿迷彩服，携带机关枪，大摆造型。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

结果表明，该方法实现的空视景符合航海模拟器的精度要求和虚拟场景中漫游的实时性要求。

It is proved that the scheme is reasonable and actable according to the result of simulation.

最后对系统进行设计和模拟，验证方案的合理性和可行性。

It is found that the flexible hose easily enwind under some launching operation modes by numerical simulation.

显示些布放操作模式下,软管缠绕现象发生的全过程。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制系统的,并对调节器进行参数整定。

It provides a significant condition for data management of digital human body, multi-data introject and imitation and virtual technique.

为数字人体的数据管理、多种数据融合与虚拟技术提供必要条件。

In this paper,the characteristics of tripropellant rocket engine was studied in two different ways:experiment and simulation .

本文从实验、两个方面对三组元液体火箭发动机推力室的工作过程进行研究。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

系统研制中，提出并实现集建筑建模器-结构分析器-演示器于一体的三器一体化的建筑工程辅助设计和软件开发思路。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值研究带底孔的圆筒形件成形后底孔的变形规律,此基础上建立带底孔的圆筒形件成形后毛料中心孔变形规律的经验公式。

The images from MPR and 3D imaging and CTVE were compared with 30 cases of urologic diseases from IVU and fiberendoscope,respectively.

分析30例泌尿系病例,分别进行多平面重组(MPR)、三维(3D)成像及CT内镜(CTVE),并与(IVU)图像和膀胱纤维内镜进行比较。

A minitype wireless noise measure system is designed to act as an automonitor, which has been proved to be a practical device.

试验结果表明，该系统可以有效获得飞机的噪声数据，测试结果与结果比较吻合。

The interclass difference matrix is calculated by using the fault class feature data from simulation in order to determinate the ambiguity sets.

算法利用电路故障特征数据计算故障的类间差异矩阵，从而完成故障类模糊集的确定。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例对解析方法和方法计算出的结果进行比较，从而对所提出的方法进行检验。

And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.

该系统成功我国即将运行的先进超导托克马克实验装置EAST的装配方案,并先进的聚变驱动次临界堆FDS-I概念设计研究中得到应用。

The steady state saturation and transient state saturation of the current transformer are theoretically analyzed and simutated under different burder at secondary side.

针对二次侧不同的负载，对电流互感器的稳态饱和与暂态饱和做出理论分析和。

This program is also suitabal for the ejection of any uncontrolled bomblet from carrier.

程序也适用于所有弹道导弹子母弹抛撒轴对称子弹的无控弹道。

Realizes the networked measure or control and asynchronous emluator.

实现了网络化的控与异步。

Virtul endoscopy can multi-angularly display spinal canal injury and stricture.

内窥镜能多角度观察病变椎管内形态及狭窄状况。

A computerized overall forging system's model including hammerer,air hammer and forging part was developed.

开发了人一空气锤-锻件人机系统模型软件。

The listener sidetone rating defines the effect of interference sound on the voice quality.

背景侧音量是在量话使用在吵杂环境畤由送话端回授到受话端的量。

Several women staff member is worn confuse colour to take, carry emulation emmagee, place model greatly.

数名女性工作人员身穿迷彩服，携带机关枪，大摆造型。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

结果表明，该方法实现的空视景符合航海模拟器的精度要求和虚拟场景中漫游的实时性要求。

It is proved that the scheme is reasonable and actable according to the result of simulation.

最后对系统进行了设计和模拟，验证了方案的合理性和可行性。

It is found that the flexible hose easily enwind under some launching operation modes by numerical simulation.

示了在某些布放操作模式下,软管缠绕现象发生的全过程。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制系统的,并对调节器进行参数整定。

It provides a significant condition for data management of digital human body, multi-data introject and imitation and virtual technique.

为数字人体的数据管理、多种数据融合与虚拟技术提供了必要条件。

In this paper,the characteristics of tripropellant rocket engine was studied in two different ways:experiment and simulation .

本文从实验、两个方面对三组元液体火箭发动机推力室的工作过程进行了研究。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建模器-结构分析器-演示器于一体的三器一体化的建筑工程辅助设计和软件开发思路。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值研究了带底孔的圆筒形件成形后底孔的变形规律,在此基础上建立了带底孔的圆筒形件成形后毛料中心孔变形规律的经验公式。

The images from MPR and 3D imaging and CTVE were compared with 30 cases of urologic diseases from IVU and fiberendoscope,respectively.

分析30例泌尿系病例,分别进行多平面重组(MPR)、三维(3D)成像及CT内镜(CTVE),并与(IVU)图像和膀胱纤维内镜进行比较。

A minitype wireless noise measure system is designed to act as an automonitor, which has been proved to be a practical device.

试验结果表明，该系统可以有效获得飞机的噪声数据，试结果与结果比较吻合。

The interclass difference matrix is calculated by using the fault class feature data from simulation in order to determinate the ambiguity sets.

算法利用路故障特征数据计算故障的类间差异矩阵，从而完成故障类模糊集的确定。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例对解析方法和方法计算出的结果进行比较，从而对所提出的方法进行了检验。

And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.

该系统成功了我国即将运行的先进超导托克马克实验装置EAST的装配方案,并在先进的聚变驱动次临界堆FDS-I概念设计研究中得到应用。

The steady state saturation and transient state saturation of the current transformer are theoretically analyzed and simutated under different burder at secondary side.

针对二次侧不同的负载，对流互感器的稳态饱和与暂态饱和做出理论分析和。

This program is also suitabal for the ejection of any uncontrolled bomblet from carrier.

仿真程序也适用于所有弹道导弹子母弹抛撒轴对称子弹的无控弹道仿真。

Realizes the networked measure or control and asynchronous emluator.

实现了网络化的测控与异步仿真。

Virtul endoscopy can multi-angularly display spinal canal injury and stricture.

仿真内窥镜能多角度观察病变椎管内形态及狭窄状况。

A computerized overall forging system's model including hammerer,air hammer and forging part was developed.

开了人一空气锤-锻件人模型仿真软件。

The listener sidetone rating defines the effect of interference sound on the voice quality.

背景侧音当量是在仿真量测当电话使用在吵杂环境畤由送话端回授到受话端的量。

Several women staff member is worn confuse colour to take, carry emulation emmagee, place model greatly.

数名女性工作人员身穿迷彩服，携带仿真关枪，大摆造型。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该方法实现的空视景符合航海模拟器的精度要求和虚拟场景中漫游的实时性要求。

It is proved that the scheme is reasonable and actable according to the result of simulation.

最后对进行了设计和模拟仿真，验证了方案的合理性和可行性。

It is found that the flexible hose easily enwind under some launching operation modes by numerical simulation.

仿真显示了在某些布放操作模式下,软管缠绕现的全过程。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制的仿真,并对调节器进行参数整定。

It provides a significant condition for data management of digital human body, multi-data introject and imitation and virtual technique.

为数字人体的数据管理、多种数据融合与仿真虚拟技术提供了必要条件。

In this paper,the characteristics of tripropellant rocket engine was studied in two different ways:experiment and simulation .

本文从实验、仿真两个方面对三组元液体火箭动推力室的工作过程进行了研究。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在研制中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计和软件开思路。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了带底孔的圆筒形件成形后底孔的变形规律,在此基础上建立了带底孔的圆筒形件成形后毛料中心孔变形规律的经验公式。

The images from MPR and 3D imaging and CTVE were compared with 30 cases of urologic diseases from IVU and fiberendoscope,respectively.

分析30例泌尿病例,分别进行多平面重组(MPR)、三维(3D)成像及CT仿真内镜(CTVE),并与(IVU)图像和膀胱纤维内镜进行比较。

A minitype wireless noise measure system is designed to act as an automonitor, which has been proved to be a practical device.

试验结果表明，该可以有效获得飞的噪声数据，测试结果与仿真结果比较吻合。

The interclass difference matrix is calculated by using the fault class feature data from simulation in order to determinate the ambiguity sets.

算法利用电路仿真故障特征数据计算故障的类间差异矩阵，从而完成故障类模糊集的确定。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例对解析方法和仿真方法计算出的结果进行比较，从而对所提出的仿真方法进行了检验。

And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.

该成功仿真了我国即将运行的先进超导托克马克实验装置EAST的装配方案,并在先进的聚变驱动次临界堆FDS-I概念设计研究中得到应用。

The steady state saturation and transient state saturation of the current transformer are theoretically analyzed and simutated under different burder at secondary side.

针对二次侧不同的负载，对电流互感器的稳态饱和与暂态饱和做出理论分析和仿真。

This program is also suitabal for the ejection of any uncontrolled bomblet from carrier.

仿程序也适用于所有弹道导弹子母弹抛撒轴对称子弹无控弹道仿。

Realizes the networked measure or control and asynchronous emluator.

实现了网络化测控与异步仿。

Virtul endoscopy can multi-angularly display spinal canal injury and stricture.

仿内窥镜能多角度观察病变椎管内形态及狭窄状况。

A computerized overall forging system's model including hammerer,air hammer and forging part was developed.

开发了人一空气锤-锻件人机系统模型仿软件。

The listener sidetone rating defines the effect of interference sound on the voice quality.

背景侧音当量是在仿量测当电话使用在吵杂环境畤由送话端回授到受话端量。

Several women staff member is worn confuse colour to take, carry emulation emmagee, place model greatly.

数名女性工作人员身穿迷彩服，携带仿机关枪，大摆造型。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿表明，该方法实现空视景符合航海模精度要求和虚场景中漫游实时性要求。

It is proved that the scheme is reasonable and actable according to the result of simulation.

最后对系统进行了设计和模仿，验证了方案合理性和可行性。

It is found that the flexible hose easily enwind under some launching operation modes by numerical simulation.

仿显示了在某些布放操作模式下,软管缠绕现象发生全过程。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节实现过程控制系统仿,并对调节进行参数整定。

It provides a significant condition for data management of digital human body, multi-data introject and imitation and virtual technique.

为数字人体数据管理、多种数据融合与仿虚技术提供了必要条件。

In this paper,the characteristics of tripropellant rocket engine was studied in two different ways:experiment and simulation .

本文从实验、仿两个方面对三组元液体火箭发动机推力室工作过程进行了研究。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建模-构分析-仿演示于一体三一体化建筑工程辅助设计和软件开发思路。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿研究了带底孔圆筒形件成形后底孔变形规律,在此基础上建立了带底孔圆筒形件成形后毛料中心孔变形规律经验公式。

The images from MPR and 3D imaging and CTVE were compared with 30 cases of urologic diseases from IVU and fiberendoscope,respectively.

分析30例泌尿系病例,分别进行多平面重组(MPR)、三维(3D)成像及CT仿内镜(CTVE),并与(IVU)图像和膀胱纤维内镜进行比较。

A minitype wireless noise measure system is designed to act as an automonitor, which has been proved to be a practical device.

试验表明，该系统可以有效获得飞机噪声数据，测试与仿比较吻合。

The interclass difference matrix is calculated by using the fault class feature data from simulation in order to determinate the ambiguity sets.

算法利用电路仿故障特征数据计算故障类间差异矩阵，从而完成故障类模糊集确定。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例对解析方法和仿方法计算出进行比较，从而对所提出仿方法进行了检验。

And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.

该系统成功仿了我国即将运行先进超导托克马克实验装置EAST装配方案,并在先进聚变驱动次临界堆FDS-I概念设计研究中得到应用。

The steady state saturation and transient state saturation of the current transformer are theoretically analyzed and simutated under different burder at secondary side.

针对二次侧不同负载，对电流互感稳态饱和与暂态饱和做出理论分析和仿。

This program is also suitabal for the ejection of any uncontrolled bomblet from carrier.

仿真程序也适用于所有弹道导弹子母弹抛撒轴对称子弹的无控弹道仿真。

Realizes the networked measure or control and asynchronous emluator.

实现了网络化的测控与异步仿真。

Virtul endoscopy can multi-angularly display spinal canal injury and stricture.

仿真内窥镜能多角度观察病变椎管内形态及狭窄状况。

A computerized overall forging system's model including hammerer,air hammer and forging part was developed.

开发了人一空气锤-锻件人机系统模型仿真软件。

The listener sidetone rating defines the effect of interference sound on the voice quality.

背景侧音当量是在仿真量测当电话使用在吵杂环境畤由送话端回授到受话端的量。

Several women staff member is worn confuse colour to take, carry emulation emmagee, place model greatly.

数名女性工作人员身穿迷彩服，携带仿真机关枪，型。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该方法实现的空视景符合航海模拟器的精度虚拟场景中漫游的实时性。

It is proved that the scheme is reasonable and actable according to the result of simulation.

最后对系统进行了设计模拟仿真，验证了方案的合理性可行性。

It is found that the flexible hose easily enwind under some launching operation modes by numerical simulation.

仿真显示了在某些布放操作模式下,软管缠绕现象发生的全过程。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控制系统的仿真,并对调节器进行参数整定。

It provides a significant condition for data management of digital human body, multi-data introject and imitation and virtual technique.

为数字人体的数据管理、多种数据融合与仿真虚拟技术提供了必条件。

In this paper,the characteristics of tripropellant rocket engine was studied in two different ways:experiment and simulation .

本文从实验、仿真两个方面对三组元液体火箭发动机推力室的工作过程进行了研究。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计软件开发思路。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了带底孔的圆筒形件成形后底孔的变形规律,在此基础上建立了带底孔的圆筒形件成形后毛料中心孔变形规律的经验公式。

The images from MPR and 3D imaging and CTVE were compared with 30 cases of urologic diseases from IVU and fiberendoscope,respectively.

分析30例泌尿系病例,分别进行多平面重组(MPR)、三维(3D)成像及CT仿真内镜(CTVE),并与(IVU)图像膀胱纤维内镜进行比较。

A minitype wireless noise measure system is designed to act as an automonitor, which has been proved to be a practical device.

试验结果表明，该系统可以有效获得飞机的噪声数据，测试结果与仿真结果比较吻合。

The interclass difference matrix is calculated by using the fault class feature data from simulation in order to determinate the ambiguity sets.

算法利用电路仿真故障特征数据计算故障的类间差异矩阵，从而完成故障类模糊集的确定。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例对解析方法仿真方法计算出的结果进行比较，从而对所提出的仿真方法进行了检验。

And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.

该系统成功仿真了我国即将运行的先进超导托克马克实验装置EAST的装配方案,并在先进的聚变驱动次临界堆FDS-I概念设计研究中得到应用。

The steady state saturation and transient state saturation of the current transformer are theoretically analyzed and simutated under different burder at secondary side.

针对二次侧不同的负载，对电流互感器的稳态饱与暂态饱做出理论分析仿真。

This program is also suitabal for the ejection of any uncontrolled bomblet from carrier.

仿真程序也适用于所有弹道导弹子母弹抛撒轴对称子弹的无控弹道仿真。

Realizes the networked measure or control and asynchronous emluator.

实现了网络化的测控与异步仿真。

Virtul endoscopy can multi-angularly display spinal canal injury and stricture.

仿真窥镜能多角度观察病变椎态及狭窄状况。

A computerized overall forging system's model including hammerer,air hammer and forging part was developed.

开发了人一空气锤-锻件人机模型仿真软件。

The listener sidetone rating defines the effect of interference sound on the voice quality.

背景侧音当量是在仿真量测当电话使用在吵杂环境畤由送话端回授到受话端的量。

Several women staff member is worn confuse colour to take, carry emulation emmagee, place model greatly.

数名女性工作人员身穿迷彩服，携带仿真机关枪，大摆造型。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该方法实现的空视景符合航海模拟器的精度要求和虚拟场景中漫游的实时性要求。

It is proved that the scheme is reasonable and actable according to the result of simulation.

最后对进行了设计和模拟仿真，验证了方案的合理性和可行性。

It is found that the flexible hose easily enwind under some launching operation modes by numerical simulation.

仿真显示了在某些布放操作模式下,软缠绕现象发生的全过程。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器实现过程控的仿真,并对调节器进行参数整定。

It provides a significant condition for data management of digital human body, multi-data introject and imitation and virtual technique.

为数字人体的数据理、多种数据融合与仿真虚拟技术提供了必要条件。

In this paper,the characteristics of tripropellant rocket engine was studied in two different ways:experiment and simulation .

本文从实验、仿真两个方面对三组元液体火箭发动机推力室的工作过程进行了研究。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在研中，提出并实现了集建筑建模器-结构分析器-仿真演示器于一体的三器一体化的建筑工程辅助设计和软件开发思路。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了带底孔的圆筒件成后底孔的变规律,在此基础上建立了带底孔的圆筒件成后毛料中心孔变规律的经验公式。

The images from MPR and 3D imaging and CTVE were compared with 30 cases of urologic diseases from IVU and fiberendoscope,respectively.

分析30例泌尿病例,分别进行多平面重组(MPR)、三维(3D)成像及CT仿真镜(CTVE),并与(IVU)图像和膀胱纤维镜进行比较。

A minitype wireless noise measure system is designed to act as an automonitor, which has been proved to be a practical device.

试验结果表明，该可以有效获得飞机的噪声数据，测试结果与仿真结果比较吻合。

The interclass difference matrix is calculated by using the fault class feature data from simulation in order to determinate the ambiguity sets.

算法利用电路仿真故障特征数据计算故障的类间差异矩阵，从而完成故障类模糊集的确定。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布实例对解析方法和仿真方法计算出的结果进行比较，从而对所提出的仿真方法进行了检验。

And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.

该成功仿真了我国即将运行的先进超导托克马克实验装置EAST的装配方案,并在先进的聚变驱动次临界堆FDS-I概念设计研究中得到应用。

The steady state saturation and transient state saturation of the current transformer are theoretically analyzed and simutated under different burder at secondary side.

针对二次侧不同的负载，对电流互感器的稳态饱和与暂态饱和做出理论分析和仿真。