73.the grid circuit is out of order.

栅路发生故障。

The next stage was the triode, which uses a third electrode called the grid.

下一阶段是三管，它使用称为栅的第三个。

So because if we apply a voltage, some current will flow into the gate.

所因为如果们施加压，一些流会流入栅。

When we can charge the gate faster, we can switch faster because charging the gate is essentially a switching operation.

当们快地为栅时，们快地切换，因为对栅本质上是一种开关操作。

What's interesting is that if we increase the voltage that we put on the gate, we can make them switch faster.

有趣的是，如果们增加施加在栅上的压，们使它们切换得快。

The wordline wire connects to  the gate of the transistor while the bitline wire connects to the other side of the transistor's  channel.

字线连接到晶体管的栅，而位线连接到晶体管通道的另一侧。

Just as before, the wordlines connect to each transistor's control  gate in rows, and then all the bitlines in columns connect to the channel opposite each capacitor.

与之前一样，字线按行连接到每个晶体管的控制栅，然后按列连接所有位线到每个容器对面的通道。

In order to isolate and determine which row and layer to write to or read from, control gate selectors are used along layers and bitline selectors are used along the rows.

为了隔离并确定要写入或读取的行和层，沿层使用控制栅选择器， 沿行使用位线选择器。

So the setup time, for example, is you need some time to chain, so to charge up all the gates of the MOSFET in such a D flip-flop or wherever else.

因此，例如，设置时间是您需要一些时间来链接，便为此类 D 触发器或其他任何地方的 MOSFET 的所有栅。

And a higher current means that we can put more charges into the gate capacitance and thereby turn the MOSFET on faster or discharge it faster and turn it off faster.

高的流意味着们将多的荷放入栅容，从而快地打开 MOSFET 或快地放并快地关闭它。