粘合

He joined two blocks of wood with glue.

他用胶水把两块木头粘合起来。

B-the layers of wood together with glue.

用乳胶把一层层木板粘合起来。

That is a padhesive with the powder Diecty,Compress tablets and replenisher,Disinteante,adhesive of the capsula.

本品主要用作药物固体剂，全粉末直接片干燥粘合剂，胶囊填充剂,崩解剂，湿法造粒粘合剂和着色延展剂。

All perpends are to be strictly true and square and the whole properly bonded together.

所有直角处必须精确和方正，且整体要粘合妥当。

Using self-prepared sodium naphthalide solution,PTFE micropore membrane was modified to improve its wetness and adhesiveness.

用自—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面润湿性和粘合性。

The same forces and mechanisms responsible for size enlargement in roller compaction are responsible for bond formation during tabletting.

碾中施加于颗粒增大和理也用于片粘合成型。

Chlorhydrin rubber properties of physical and chemical. process technology. adhesivenessand use in cold reducting machines were mainly introduced.

主要介绍了氯醇橡胶械性能、工艺性能、粘合性能及在冷密封中应用。

The Board of the binders with paperboard adhesive between a collection, this intermolecular bonding of itself is referred to as coacervate.

渗透到纸板黏合剂同纸板表面黏合剂间形成一个集合，这种粘合本身分子间粘合称为凝聚粘合。

This paper has predicted indirectly by means of measuring the equivalent viscosity of resorcin-formaldehyde resin liquor(thereinafter referred to as RF resin).

通过测量在线取样间苯二酚-甲醛树脂(以下简称RF树脂)溶液当量粘度,来间接判断RF树脂粘合性能。

Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

苯醚型酚醛树脂是铸造用聚氨酯粘合剂主要成份之一,它结构及合成工艺条件决定了该类粘合剂性能。

In the compression moulding technology, preheat and prepressing procedures are added to improve the flowability of the bond and physical and mechanical properties of the product.

在模塑工艺中，增加预热、预工序，提高粘合剂流动性和产品物理械性能。

When container with an inner aluminum-foil cover passes inductorium, heat will be immediately generated and makes the aluminum-foil layer stick tightly to the bottle mouth to avoid air leakage.

当装有铝箔内盖容器经过感应圈时，即产生涡流瞬时发热，使铝箔面与瓶口紧密地粘合，达到气密封口目。

The composition and syntheses of a newly developed specific binding agent for cellulated paperboard and the influence of components of binding agent on adhesive power and drying speed are presented.

对蜂窝纸板专用粘合剂在合成路线,工艺配方等方面进行了讨论,并对该种粘合剂组分对其在粘度和干燥速度等方面影响进行了分析。

In order to overcome the disadvantage of low rubfastness of conventional pigment dyeing , a new type covering pigment with ultramicro azo dye as core and acrylate adhesive as shell was presented.

为克服常规涂料染色摩擦牢度低弊病,作者提出采用以超微偶氮颜料为核,以丙烯酸酯类粘合剂为壳新型颜料包覆体染色新探索途径。