仿真

A computerized overall forging system's model including hammerer,air hammer and forging part was developed.

开发了人一空气锤-锻件人机系统模型仿真软件。

Realizes the networked measure or control and asynchronous emluator.

现了网络化测控与异步仿真。

Virtul endoscopy can multi-angularly display spinal canal injury and stricture.

仿真内窥镜能多角度观察病变椎管内形态及狭窄状况。

This program is also suitabal for the ejection of any uncontrolled bomblet from carrier.

仿真程序也适用于所有弹道导弹子母弹抛撒轴对称子弹无控弹道仿真。

The listener sidetone rating defines the effect of interference sound on the voice quality.

背景侧音当量是在仿真量测当电话使用在吵杂环境畤由送话端回授到受话端量。

Simulation results show that the method can meet the real-time requirement in the shiphandling simulator.

仿真结果表明，该方法现星空视景符合航海模拟器精度要求和虚拟场景中漫游时性要求。

It is proved that the scheme is reasonable and actable according to the result of simulation.

最后对系统进行了设计和模拟仿真，验证了方案合理性和可行性。

Several women staff member is worn confuse colour to take, carry emulation emmagee, place model greatly.

数名女性作人员身穿迷彩服，携带仿真机关枪，大摆造型。

It is found that the flexible hose easily enwind under some launching operation modes by numerical simulation.

仿真显示了在某些布放操作模式下,软管缠绕现象发生全过程。

Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.

利用PMK可编程调节器现过程控制系统仿真,并对调节器进行参数整定。

It provides a significant condition for data management of digital human body, multi-data introject and imitation and virtual technique.

为数字人体数据管理、多种数据融合与仿真虚拟技术提供了必要条件。

In this paper,the characteristics of tripropellant rocket engine was studied in two different ways:experiment and simulation .

本文从验、仿真两个方面对三组元液体火箭发动机推力作过程进行了研究。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并现了集建筑建模器-结构分析器-仿真演示器于一体三器一体化建筑程辅助设计和软件开发思路。

In the paper, study on displacement law of blank hole for forming cylindraceous with bottom border by numerical simulation technology.

通过数值仿真研究了带底孔圆筒形件成形后底孔变形规律,在此基础上建立了带底孔圆筒形件成形后毛料中心孔变形规律经验公式。

The images from MPR and 3D imaging and CTVE were compared with 30 cases of urologic diseases from IVU and fiberendoscope,respectively.

分析30例泌尿系病例,分别进行多平面重组(MPR)、三维(3D)成像及CT仿真内镜(CTVE),并与(IVU)图像和膀胱纤维内镜进行比较。

The interclass difference matrix is calculated by using the fault class feature data from simulation in order to determinate the ambiguity sets.

算法利用电路仿真故障特征数据计算故障类间差异矩阵，从而完成故障类模糊集确定。

A minitype wireless noise measure system is designed to act as an automonitor, which has been proved to be a practical device.

试验结果表明，该系统可以有效获得飞机噪声数据，测试结果与仿真结果比较吻合。

And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.

该系统成功仿真了我国即将运行先进超导托克马克验装置EAST装配方案,并在先进聚变驱动次临界堆FDS-I概念设计研究中得到应用。

The detection and reconstruction of wavefront by Lateral Shear Interferometer (LSI) and Hartmann Wavefront Sensor (HWS) have been deduced analogically and simulated numerically.

对横向剪切干涉仪和哈特曼波前传感器波前探测和复原进行了类比推导和仿真计算。

Finally, the optimization quantity of spare parts following exponential distribution are calculated with both this method and analysable method.The two results fit well.

最后利用一个指数分布例对解析方法和仿真方法计算出结果进行比较，从而对所提出仿真方法进行了检验。