Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的韧和抗热烈纹能力,用于预精轧机架和热轧螺纹钢.

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了预制厚钢板缝断裂韧度试样疲劳裂纹的“高K比法”。

Glass fiber is used to reinforce material for increasing toughness, flexural strength, and tensibility in unsaturated polymer modified concrete.

玻璃纤维则是作为强化材,以增加水泥浆体的韧及抗弯、抗拉等机械。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

后热处理可以较好地改善接接头的韧，但存在耗能大、工时长等问题。

It is shown that the fracture properties are determined by materials strength before tufftride process and by materials toughness after tufftride process.

疲劳最后断裂取决于材料的强度和韧。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料中的残存元素等对机用锯条的韧有不同程度的影响。

Results showed that the flexual strength and the flexual toughness index of UHPC become more than 2 times and 10 times respectively of those 0f the matrix concrete by the reinforcement of fibers.

结果表明通过纤维的增强和增韧作用，超高能混凝土的抗弯强度和弯曲韧指数分别提高到2倍和10倍以上。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的抗烈纹能力,用于预精轧机轧螺纹钢.

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了预制厚钢板焊缝断裂度试样疲劳裂纹的“高K比法”。

Glass fiber is used to reinforce material for increasing toughness, flexural strength, and tensibility in unsaturated polymer modified concrete.

玻璃纤维则是作为强化材,以增加水泥浆体的及抗弯、抗拉等机械质。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后处理可以较好地改善焊接接头的，但存在耗能大、工时长等问题。

It is shown that the fracture properties are determined by materials strength before tufftride process and by materials toughness after tufftride process.

疲劳最后断裂质取决于材料的强度。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料中的残存元素等对机用锯条的有不同程度的影响。

Results showed that the flexual strength and the flexual toughness index of UHPC become more than 2 times and 10 times respectively of those 0f the matrix concrete by the reinforcement of fibers.

结果表明通过纤维的增强增作用，超高能混凝土的抗弯强度弯曲指数分别提高到2倍10倍以上。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的韧性和抗热烈纹能力,用于预精轧机架和热轧螺纹钢.

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了预制厚钢板缝断裂韧度试样疲劳裂纹的“高K比法”。

Glass fiber is used to reinforce material for increasing toughness, flexural strength, and tensibility in unsaturated polymer modified concrete.

玻璃纤维则是作为强化材,以增加水泥浆体的韧性及抗弯、抗拉等机械性质。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

后热处理可以较好地改善头的韧性，但存在耗能大、工时长等问题。

It is shown that the fracture properties are determined by materials strength before tufftride process and by materials toughness after tufftride process.

疲劳最后断裂性质取决于材料的强度和韧性。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料中的残存元素等对机用锯条的韧性有不同程度的影响。

Results showed that the flexual strength and the flexual toughness index of UHPC become more than 2 times and 10 times respectively of those 0f the matrix concrete by the reinforcement of fibers.

结果表明通过纤维的增强和增韧作用，超高性能混凝土的抗弯强度和弯曲韧性指数分别提高到2倍和10倍以上。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良韧性和抗热烈纹能力,用于预精轧机架和热轧螺纹钢.

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了预制厚钢板焊缝断裂韧度试样疲劳裂纹“高K比法”。

Glass fiber is used to reinforce material for increasing toughness, flexural strength, and tensibility in unsaturated polymer modified concrete.

玻璃纤维则是作为强化材,以增加水泥浆体韧性及抗弯、抗拉等机械性质。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后热处理可以较好地改善焊韧性，但存在耗能大、工时长等问题。

It is shown that the fracture properties are determined by materials strength before tufftride process and by materials toughness after tufftride process.

疲劳最后断裂性质取决于材料强度和韧性。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条分齿压痕、基体碳化物状况以及材料中残存元素等对机用锯条韧性有不同程度影响。

Results showed that the flexual strength and the flexual toughness index of UHPC become more than 2 times and 10 times respectively of those 0f the matrix concrete by the reinforcement of fibers.

结果表明通过纤维增强和增韧作用，超高性能混凝土抗弯强度和弯曲韧性指数分别提高到2倍和10倍以上。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的和抗热烈纹能力,用于预精轧机架和热轧螺纹钢.

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了预制厚钢板焊缝裂度试样疲劳裂纹的“高K比法”。

Glass fiber is used to reinforce material for increasing toughness, flexural strength, and tensibility in unsaturated polymer modified concrete.

玻璃纤维则是作为强化材,以增加水泥浆体的及抗弯、抗拉等机械质。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊热处理可以较好地改善焊接接头的，但存在耗能大、工时长等问题。

It is shown that the fracture properties are determined by materials strength before tufftride process and by materials toughness after tufftride process.

疲劳裂质取决于材料的强度和。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料中的残存元素等对机用锯条的有不同程度的影响。

Results showed that the flexual strength and the flexual toughness index of UHPC become more than 2 times and 10 times respectively of those 0f the matrix concrete by the reinforcement of fibers.

结果表明通过纤维的增强和增作用，超高能混凝土的抗弯强度和弯曲指数分别提高到2倍和10倍以上。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的和抗热烈纹能力,用于预精轧机架和热轧螺纹钢.

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了预制厚钢板焊缝断裂度试样疲裂纹的“高K比法”。

Glass fiber is used to reinforce material for increasing toughness, flexural strength, and tensibility in unsaturated polymer modified concrete.

玻璃纤维则是作为强化材,以增加水泥浆体的及抗弯、抗拉等机械质。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊热处理可以较好地改善焊接接头的，但存在耗能大、工时长等问题。

It is shown that the fracture properties are determined by materials strength before tufftride process and by materials toughness after tufftride process.

疲断裂质取决于材料的强度和。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料中的残存元素等对机用锯条的有不同程度的影响。

Results showed that the flexual strength and the flexual toughness index of UHPC become more than 2 times and 10 times respectively of those 0f the matrix concrete by the reinforcement of fibers.

结果表明通过纤维的增强和增作用，超高能混凝土的抗弯强度和弯曲指数分别提高到2倍和10倍以上。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的韧性和抗热烈纹能,用于预精轧机架和热轧螺纹钢.

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了预制厚钢板焊缝断裂韧度试样疲劳裂纹的“高K比法”。

Glass fiber is used to reinforce material for increasing toughness, flexural strength, and tensibility in unsaturated polymer modified concrete.

玻璃纤维则是作为强化材,水泥浆体的韧性及抗弯、抗拉等机械性质。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后热处理可较好地改善焊接接头的韧性，但存在耗能大、工时长等问题。

It is shown that the fracture properties are determined by materials strength before tufftride process and by materials toughness after tufftride process.

疲劳最后断裂性质取决于材料的强度和韧性。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况及材料中的残存元素等对机用锯条的韧性有不同程度的影响。

Results showed that the flexual strength and the flexual toughness index of UHPC become more than 2 times and 10 times respectively of those 0f the matrix concrete by the reinforcement of fibers.

结果表明通过纤维的强和韧作用，超高性能混凝土的抗弯强度和弯曲韧性指数分别提高到2倍和10倍上。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的韧性和抗热烈纹能,用于预精轧机架和热轧螺纹钢.

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了预制厚钢板焊缝断裂韧度试样疲劳裂纹的“高K比法”。

Glass fiber is used to reinforce material for increasing toughness, flexural strength, and tensibility in unsaturated polymer modified concrete.

玻璃纤维则是作为强化材,以增浆体的韧性及抗弯、抗拉等机械性质。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后热处理可以较好地改善焊接接头的韧性，但存在耗能大、工时长等问题。

It is shown that the fracture properties are determined by materials strength before tufftride process and by materials toughness after tufftride process.

疲劳最后断裂性质取决于材料的强度和韧性。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料中的残存元素等对机用锯条的韧性有不同程度的影响。

Results showed that the flexual strength and the flexual toughness index of UHPC become more than 2 times and 10 times respectively of those 0f the matrix concrete by the reinforcement of fibers.

结果表明通过纤维的增强和增韧作用，超高性能混凝土的抗弯强度和弯曲韧性指数分别提高到2倍和10倍以上。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优性和抗烈纹能力,用于预精机架和纹钢.

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了预制厚钢板焊缝断裂度试样疲劳裂纹“高K比法”。

Glass fiber is used to reinforce material for increasing toughness, flexural strength, and tensibility in unsaturated polymer modified concrete.

玻璃纤维则是作为强化材,以增加水泥浆体性及抗弯、抗拉等机械性质。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后处理可以较好地改善焊接接头性，但存在耗能大、工时长等问题。

It is shown that the fracture properties are determined by materials strength before tufftride process and by materials toughness after tufftride process.

疲劳最后断裂性质取决于材料强度和性。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条分齿压痕、基体碳化物状况以及材料中残存元素等对机用锯条性有不同程度影响。

Results showed that the flexual strength and the flexual toughness index of UHPC become more than 2 times and 10 times respectively of those 0f the matrix concrete by the reinforcement of fibers.

结果表明通过纤维增强和增作用，超高性能混凝土抗弯强度和弯曲性指数分别提高到2倍和10倍以上。

Good toughness and thermal cracking resistance.Used in the stands of prefinish rolling.Suitable for hot rolling thread steel.

具有优良的和抗热烈纹能力,用于预精轧机架和热轧螺纹钢.

A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

提出了预制厚钢板焊缝断裂度试样疲劳裂纹的“高K比法”。

Glass fiber is used to reinforce material for increasing toughness, flexural strength, and tensibility in unsaturated polymer modified concrete.

玻璃纤维则是作为强化材,以增加水泥浆体的抗弯、抗拉等机械质。

The toughness may be well improved by postheat treatment which is large in energy consumption and long in working period.

焊后热处理可以较好改善焊接接头的，但存在耗能大、工时长等问题。

It is shown that the fracture properties are determined by materials strength before tufftride process and by materials toughness after tufftride process.

疲劳最后断裂质取决于材料的强度和。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以材料中的残存元素等对机用锯条的有不同程度的影响。

Results showed that the flexual strength and the flexual toughness index of UHPC become more than 2 times and 10 times respectively of those 0f the matrix concrete by the reinforcement of fibers.

结果表明通过纤维的增强和增作用，超高能混凝土的抗弯强度和弯曲指数分别提高到2倍和10倍以上。