After ball milling, it can see the better dispensability and lower turn-on field.

经球磨后，可大略看出分散较佳之浆料，起始场发射电场有往低的趋势。

According to the falling body weight,shape and well structure,designed washover milling fishing tool.

根据下落物的重量、形状及井身结构,设计作了套打捞器。

Composite W-Cu oxide nanopowder was prepared by spray-drying and milling of ammonium metatungstate(AMT) and cupric nitrate.

采用偏钨酸铵、硝酸铜通过燥、焙烧、球磨工艺备纳米氧化钨铜复合粉末。

Blade tools: eyebolt, turning tool, Allen key, screw tap, milling cutter, drill bits, etc.

埃令螺丝（吊环）、圆车刀、六角匙、丝攻、刀、钻咀等。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针槽通常是由人工控用床一条条出来的，费工费时，槽精度低。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上出一个狭槽来实现压床上模具中心的调整。

The white mixture of starting materials turns green after milling, indicating the formation of polyaniline in its doped emeraldine oxidation state.

白色的初始材料混合物在球磨后变成了绿色，这表明，混合物在掺杂苯胺绿氧化状态下形成了聚苯胺。

The problem of synchrodrive for gantry-moving milling machines is researched, and two linear motors as traversing drive mechanism of gantries are applied.

针对龙门移动式镗床同步伺服问题进行了研究,并用两台直线电动机作为龙门柱纵向进给的传动机构。

Through analyzing and accounting evocable error of tool's transmutation during milling process,the compensatory method to the error in NC machining has been put forward.

通过分析计算数控削过程中刀具变形引起的误差,提出对这种误差的补偿方法。

Our main products are VMC machining center, CNC slant bed lathe, CNC and manual toolroom milling machine, high speed spindle, ball screw and other functional spare parts.

集团内其他成员分别为从事机床零部件的生产加工、产品包装以及国内外贸易方面的经营合动。

Physical processing of APIs, such as granulation, coating or physical manipulation of particle size (e.g. milling, micronizing), should be conducted at least to the standards of this Guide.

原料药的物理过程，如颗粒化，胞衣或颗粒的物理处理（如，磨碎，微粉化）因至少符合本指南的标准。

After ball milling, it can see the better dispensability and lower turn-on field.

经球磨后，可大略看出分散较佳之浆料，起始发射电有低的趋势。

According to the falling body weight,shape and well structure,designed washover milling fishing tool.

根据下落物的重量、形状及井身结构,设计制作了套打捞器。

Composite W-Cu oxide nanopowder was prepared by spray-drying and milling of ammonium metatungstate(AMT) and cupric nitrate.

采用偏钨酸铵、硝酸铜通过喷雾干燥、焙烧、球磨工艺制备纳米氧化钨铜复合粉末。

Blade tools: eyebolt, turning tool, Allen key, screw tap, milling cutter, drill bits, etc.

埃令螺丝（吊环）、圆车刀、六角匙、丝攻、刀、钻咀等。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针钢板上的针槽通常是由人工控制用一条条出来的，费工费时，槽精度低。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上出一个狭槽来实现压上模具中心的调整。

The white mixture of starting materials turns green after milling, indicating the formation of polyaniline in its doped emeraldine oxidation state.

白色的初始材料混合物在球磨后变成了绿色，这表明，混合物在掺杂苯胺绿氧化状态下形成了聚苯胺。

The problem of synchrodrive for gantry-moving milling machines is researched, and two linear motors as traversing drive mechanism of gantries are applied.

针对龙门移动式镗同步伺服问题进行了研究,并用两台直线电动机作为龙门柱纵向进给的传动机构。

Through analyzing and accounting evocable error of tool's transmutation during milling process,the compensatory method to the error in NC machining has been put forward.

通过分析计算控削过程中刀具变形引起的误差,提出对这种误差的补偿方法。

Our main products are VMC machining center, CNC slant bed lathe, CNC and manual toolroom milling machine, high speed spindle, ball screw and other functional spare parts.

集团内其他成员分别为从事机零部件的生产加工、产品包装以及国内外贸易方面的经营合动。

Physical processing of APIs, such as granulation, coating or physical manipulation of particle size (e.g. milling, micronizing), should be conducted at least to the standards of this Guide.

原料药的物理过程，如颗粒化，胞衣或颗粒的物理处理（如，磨碎，微粉化）因至少符合本指南的标准。

After ball milling, it can see the better dispensability and lower turn-on field.

经球磨后，可大略看出分散较佳之浆料，起始场发射电场有往低的趋势。

According to the falling body weight,shape and well structure,designed washover milling fishing tool.

根据下落物的重量、形状及井身结构,设计制作了套打捞器。

Composite W-Cu oxide nanopowder was prepared by spray-drying and milling of ammonium metatungstate(AMT) and cupric nitrate.

采用偏钨酸铵、硝酸铜通过喷雾干燥、焙烧、球磨工艺制备纳米氧化钨铜复合粉末。

Blade tools: eyebolt, turning tool, Allen key, screw tap, milling cutter, drill bits, etc.

埃令螺丝（吊环）、圆车刀、六角匙、丝攻、刀、钻咀等。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针槽通常是由人工控制用床一条条出来的，费工费时，槽精度低。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上出一个狭槽来实现压床上模具中心的调整。

The white mixture of starting materials turns green after milling, indicating the formation of polyaniline in its doped emeraldine oxidation state.

白色的初始材料混合物在球磨后变成了绿色，这表明，混合物在掺杂苯胺绿氧化状态下形成了聚苯胺。

The problem of synchrodrive for gantry-moving milling machines is researched, and two linear motors as traversing drive mechanism of gantries are applied.

针对龙门移动式镗床同步伺服问题进行了研究,并用两台直线电动机作为龙门柱纵向进给的传动机构。

Through analyzing and accounting evocable error of tool's transmutation during milling process,the compensatory method to the error in NC machining has been put forward.

通过分析计算数控削过程中刀具变形引起的误差,提出对这种误差的补偿方法。

Our main products are VMC machining center, CNC slant bed lathe, CNC and manual toolroom milling machine, high speed spindle, ball screw and other functional spare parts.

集团内其他成员分别为从事机床零部件的生产加工、产品包装以及国内外贸易方面的经营合动。

Physical processing of APIs, such as granulation, coating or physical manipulation of particle size (e.g. milling, micronizing), should be conducted at least to the standards of this Guide.

原料药的物理过程，如颗粒化，胞衣或颗粒的物理处理（如，磨碎，微粉化）因至少符合本指南的标准。

After ball milling, it can see the better dispensability and lower turn-on field.

经后，可大略看出分散较佳之浆料，起始场发射电场有往低的趋势。

According to the falling body weight,shape and well structure,designed washover milling fishing tool.

根据下落物的重量、形状及井身结构,设计制作了套打捞器。

Composite W-Cu oxide nanopowder was prepared by spray-drying and milling of ammonium metatungstate(AMT) and cupric nitrate.

采用偏钨酸铵、硝酸铜通过喷雾干燥、焙、工艺制备纳米氧化钨铜复合粉末。

Blade tools: eyebolt, turning tool, Allen key, screw tap, milling cutter, drill bits, etc.

埃令螺丝（吊环）、圆车刀、六角匙、丝攻、刀、钻咀等。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针槽通常是由人工控制用床一条条出来的，费工费时，槽精度低。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上出一个狭槽来实现压床上模具中心的调整。

The white mixture of starting materials turns green after milling, indicating the formation of polyaniline in its doped emeraldine oxidation state.

白色的初始材料混合物在后变成了绿色，这表明，混合物在掺杂苯胺绿氧化状态下形成了聚苯胺。

The problem of synchrodrive for gantry-moving milling machines is researched, and two linear motors as traversing drive mechanism of gantries are applied.

针对龙门移动式镗床同步伺服问题进行了研究,并用两台直线电动机作为龙门柱纵向进给的传动机构。

Through analyzing and accounting evocable error of tool's transmutation during milling process,the compensatory method to the error in NC machining has been put forward.

通过分析计算控削过程中刀具变形引起的误差,提出对这种误差的补偿方法。

Our main products are VMC machining center, CNC slant bed lathe, CNC and manual toolroom milling machine, high speed spindle, ball screw and other functional spare parts.

集团内其他成员分别为从事机床零部件的生产加工、产品包装以及国内外贸易方面的经营合动。

Physical processing of APIs, such as granulation, coating or physical manipulation of particle size (e.g. milling, micronizing), should be conducted at least to the standards of this Guide.

原料药的物理过程，如颗粒化，胞衣或颗粒的物理处理（如，碎，微粉化）因至少符合本指南的标准。

After ball milling, it can see the better dispensability and lower turn-on field.

经球磨后，可大略看出分散较佳之浆料，起始场发射电场有往低的趋势。

According to the falling body weight,shape and well structure,designed washover milling fishing tool.

根据下落物的重量、形状及井身结构,设计制作了捞器。

Composite W-Cu oxide nanopowder was prepared by spray-drying and milling of ammonium metatungstate(AMT) and cupric nitrate.

采偏钨酸铵、硝酸铜通过喷雾干燥、焙烧、球磨工艺制备纳米氧化钨铜复合粉末。

Blade tools: eyebolt, turning tool, Allen key, screw tap, milling cutter, drill bits, etc.

埃令螺丝（吊环）、圆车刀、六角匙、丝攻、刀、钻咀等。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针槽通常是由人工控制床一条条出来的，费工费时，槽精度低。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上出一个狭槽来实现压床上模具中心的调整。

The white mixture of starting materials turns green after milling, indicating the formation of polyaniline in its doped emeraldine oxidation state.

白色的初始材料混合物在球磨后变成了绿色，这表明，混合物在掺杂苯胺绿氧化状态下形成了聚苯胺。

The problem of synchrodrive for gantry-moving milling machines is researched, and two linear motors as traversing drive mechanism of gantries are applied.

针对龙门移动式镗床同步伺服问题进行了研究,并两台直线电动机作为龙门柱纵向进给的传动机构。

Through analyzing and accounting evocable error of tool's transmutation during milling process,the compensatory method to the error in NC machining has been put forward.

通过分析计算数控削过程中刀具变形引起的误差,提出对这种误差的补偿方法。

Our main products are VMC machining center, CNC slant bed lathe, CNC and manual toolroom milling machine, high speed spindle, ball screw and other functional spare parts.

集团内其他成员分别为从事机床零部件的生产加工、产品包装以及国内外贸易方面的经营合动。

Physical processing of APIs, such as granulation, coating or physical manipulation of particle size (e.g. milling, micronizing), should be conducted at least to the standards of this Guide.

原料药的物理过程，如颗粒化，胞衣或颗粒的物理处理（如，磨碎，微粉化）因至少符合本指南的标准。

After ball milling, it can see the better dispensability and lower turn-on field.

经球磨后，可大略看出分散较佳之浆料，起始场发射电场有往低的趋势。

According to the falling body weight,shape and well structure,designed washover milling fishing tool.

根据下落物的重量、形状及井身结构,设计制作了套打捞器。

Composite W-Cu oxide nanopowder was prepared by spray-drying and milling of ammonium metatungstate(AMT) and cupric nitrate.

采用偏钨酸铵、硝酸铜通过喷雾干燥、焙烧、球磨工艺制备纳米氧化钨铜复合粉末。

Blade tools: eyebolt, turning tool, Allen key, screw tap, milling cutter, drill bits, etc.

埃令螺丝（吊环）、圆车刀、六角匙、丝攻、刀、钻咀等。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针通常是由人工控制用床一条条出来的，费工费，精度低。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上出一个狭来实现压床上模具中心的调整。

The white mixture of starting materials turns green after milling, indicating the formation of polyaniline in its doped emeraldine oxidation state.

白色的初始材料混合物在球磨后变成了绿色，这表明，混合物在掺杂苯胺绿氧化状态下形成了聚苯胺。

The problem of synchrodrive for gantry-moving milling machines is researched, and two linear motors as traversing drive mechanism of gantries are applied.

针对龙门移动式镗床同步伺服问题进行了研究,并用两台直线电动机作为龙门柱纵向进给的传动机构。

Through analyzing and accounting evocable error of tool's transmutation during milling process,the compensatory method to the error in NC machining has been put forward.

通过分析计算数控削过程中刀具变形引起的误差,提出对这种误差的补偿方法。

Our main products are VMC machining center, CNC slant bed lathe, CNC and manual toolroom milling machine, high speed spindle, ball screw and other functional spare parts.

集团内其他成员分别为从事机床零部件的生产加工、产品包装以及国内外贸易方面的经营合动。

Physical processing of APIs, such as granulation, coating or physical manipulation of particle size (e.g. milling, micronizing), should be conducted at least to the standards of this Guide.

原料药的物理过程，如颗粒化，胞衣或颗粒的物理处理（如，磨碎，微粉化）因至少符合本指南的标准。

After ball milling, it can see the better dispensability and lower turn-on field.

经球磨后，可大略看出分散较佳之浆料，起始场发射电场有往低趋势。

According to the falling body weight,shape and well structure,designed washover milling fishing tool.

根据下落物重量、形状及井身结构,设计制作了套打捞器。

Composite W-Cu oxide nanopowder was prepared by spray-drying and milling of ammonium metatungstate(AMT) and cupric nitrate.

采用偏钨酸铵、硝酸铜通过喷雾干燥、焙烧、球磨工艺制备纳米氧化钨铜复合粉末。

Blade tools: eyebolt, turning tool, Allen key, screw tap, milling cutter, drill bits, etc.

埃令螺丝（吊环）、圆车刀、六角匙、丝攻、刀、钻咀等。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢针槽通常是由人工控制用床一条条出来，费工费时，槽精度低。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行底部底出一个狭槽来实现压床模具中心调整。

The white mixture of starting materials turns green after milling, indicating the formation of polyaniline in its doped emeraldine oxidation state.

白色初始材料混合物在球磨后变成了绿色，这表明，混合物在掺杂苯胺绿氧化状态下形成了聚苯胺。

The problem of synchrodrive for gantry-moving milling machines is researched, and two linear motors as traversing drive mechanism of gantries are applied.

针对龙门移动式镗床同步伺服问题进行了研究,并用两台直线电动机作为龙门柱纵向进给传动机构。

Through analyzing and accounting evocable error of tool's transmutation during milling process,the compensatory method to the error in NC machining has been put forward.

通过分析计算数控削过程中刀具变形引起误差,提出对这种误差补偿方法。

Our main products are VMC machining center, CNC slant bed lathe, CNC and manual toolroom milling machine, high speed spindle, ball screw and other functional spare parts.

集团内其他成员分别为从事机床零部件生产加工、产品包装以及国内外贸易方面经营合动。

Physical processing of APIs, such as granulation, coating or physical manipulation of particle size (e.g. milling, micronizing), should be conducted at least to the standards of this Guide.

原料药物理过程，如颗粒化，胞衣或颗粒物理处理（如，磨碎，微粉化）因至少符合本指南标准。

After ball milling, it can see the better dispensability and lower turn-on field.

经球磨后，可大略看出分散较佳之浆料，起始场发射电场有往低的趋势。

According to the falling body weight,shape and well structure,designed washover milling fishing tool.

根据下落物的重量、形状及井身结构,设计制作了套打捞器。

Composite W-Cu oxide nanopowder was prepared by spray-drying and milling of ammonium metatungstate(AMT) and cupric nitrate.

采用偏钨酸铵、硝酸铜通过喷雾干燥、焙烧、球磨艺制备纳米氧化钨铜复合粉末。

Blade tools: eyebolt, turning tool, Allen key, screw tap, milling cutter, drill bits, etc.

埃令螺丝（吊环）、圆车刀、、丝攻、刀、钻咀等。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针槽通常是由人控制用床一条条出来的，费费时，槽精度低。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上出一个狭槽来实现压床上模具中心的调整。

The white mixture of starting materials turns green after milling, indicating the formation of polyaniline in its doped emeraldine oxidation state.

白色的初始材料混合物在球磨后变成了绿色，这表明，混合物在掺杂苯胺绿氧化状态下形成了聚苯胺。

The problem of synchrodrive for gantry-moving milling machines is researched, and two linear motors as traversing drive mechanism of gantries are applied.

针对龙门移动式镗床同步伺服问题进行了研究,并用两台直线电动机作为龙门柱纵向进给的传动机构。

Through analyzing and accounting evocable error of tool's transmutation during milling process,the compensatory method to the error in NC machining has been put forward.

通过分析计算数控削过程中刀具变形引起的误差,提出对这种误差的补偿方法。

Our main products are VMC machining center, CNC slant bed lathe, CNC and manual toolroom milling machine, high speed spindle, ball screw and other functional spare parts.

集团内其他成员分别为从事机床零部件的生产加、产品包装以及国内外贸易方面的经营合动。

Physical processing of APIs, such as granulation, coating or physical manipulation of particle size (e.g. milling, micronizing), should be conducted at least to the standards of this Guide.

原料药的物理过程，如颗粒化，胞衣或颗粒的物理处理（如，磨碎，微粉化）因至少符合本指南的标准。

After ball milling, it can see the better dispensability and lower turn-on field.

经球磨后，可大略看出分散较佳之浆料，起始场发射电场有往低的趋势。

According to the falling body weight,shape and well structure,designed washover milling fishing tool.

根物的重量、形状及井身结构,设计制作了套打捞器。

Composite W-Cu oxide nanopowder was prepared by spray-drying and milling of ammonium metatungstate(AMT) and cupric nitrate.

采用偏钨酸铵、硝酸铜通过喷雾干燥、焙烧、球磨工艺制备纳米氧化钨铜复合粉末。

Blade tools: eyebolt, turning tool, Allen key, screw tap, milling cutter, drill bits, etc.

埃令螺丝（吊环）、圆车刀、六角匙、丝攻、刀、钻咀等。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针槽通常是由人工控制用床一条条出来的，费工费时，槽精度低。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上出一个狭槽来实现压床上模具中心的调整。

The white mixture of starting materials turns green after milling, indicating the formation of polyaniline in its doped emeraldine oxidation state.

白色的初始材料混合物在球磨后变成了绿色，这表明，混合物在掺杂苯胺绿氧化状态形成了聚苯胺。

The problem of synchrodrive for gantry-moving milling machines is researched, and two linear motors as traversing drive mechanism of gantries are applied.

针对龙门移动式镗床同步伺服问题进行了研究,并用两台直线电动机作为龙门柱纵向进给的传动机构。

Through analyzing and accounting evocable error of tool's transmutation during milling process,the compensatory method to the error in NC machining has been put forward.

通过分析计算数控削过程中刀具变形引起的误差,提出对这种误差的补偿方法。

Our main products are VMC machining center, CNC slant bed lathe, CNC and manual toolroom milling machine, high speed spindle, ball screw and other functional spare parts.

集团内其他成员分别为从事机床零部件的生产加工、产品包装以及国内外贸易方面的经营合动。

Physical processing of APIs, such as granulation, coating or physical manipulation of particle size (e.g. milling, micronizing), should be conducted at least to the standards of this Guide.

原料药的物理过程，如颗粒化，胞衣或颗粒的物理处理（如，磨碎，微粉化）因至少符合本指南的标准。