For the pin and crankweb deep holes, use gas gun to clean chips and show operators in WI.

对于柄销及柄深孔，必须使用气枪对底部铁屑清理干净，在作业指导书中明确以图片形式反映。

The influence of structure parameters which include diameter of round corner in axis, crankpin length and crankweb width and so on to stress focus place were discussed.

同时还探讨了部结对其应力集中部位影响，如颈过渡圆角半径、柄销长度和柄臂厚度等。

For the pin and crankweb deep holes, use gas gun to clean chips and show operators in WI.

对于曲柄销及曲柄深孔，必须使用气枪对底铁屑清理干净，在作业指导书明确以图片形式反。

The influence of structure parameters which include diameter of round corner in axis, crankpin length and crankweb width and so on to stress focus place were discussed.

还探讨了曲轴的结构参数对其应力位的影响，如轴颈过渡圆角半径、曲柄销长度和曲柄臂厚度等。

For the pin and crankweb deep holes, use gas gun to clean chips and show operators in WI.

对于曲柄销及曲柄深孔，必须使用气枪对底部铁屑清理干净，在作业书中明确以图片形式反映。

The influence of structure parameters which include diameter of round corner in axis, crankpin length and crankweb width and so on to stress focus place were discussed.

同时还探讨了曲轴的部结构参数对其应力集中部位的影响，如轴颈过渡圆、曲柄销长度和曲柄臂厚度等。

For the pin and crankweb deep holes, use gas gun to clean chips and show operators in WI.

对于曲柄销及曲柄深孔，必气枪对底部铁屑清理干净，在作业指导书中确图片形式反映。

The influence of structure parameters which include diameter of round corner in axis, crankpin length and crankweb width and so on to stress focus place were discussed.

同时还探讨了曲轴的部结构参数对其应力集中部位的影响，如轴颈过渡圆角半径、曲柄销长度和曲柄臂厚度等。

For the pin and crankweb deep holes, use gas gun to clean chips and show operators in WI.

对于曲柄销及曲柄深孔，必须使用气枪对底部铁屑清理干净，在作业指导书中明确以图片形式反映。

The influence of structure parameters which include diameter of round corner in axis, crankpin length and crankweb width and so on to stress focus place were discussed.

同时还探讨了曲轴的部结构参数对其应力集中部位的影响，如轴颈过渡圆角半径、曲柄销长度和曲柄臂厚度等。

For the pin and crankweb deep holes, use gas gun to clean chips and show operators in WI.

曲柄销及曲柄深孔，必须使用气枪底部铁屑清理干净，在作业指导书中明确以图片形式反映。

The influence of structure parameters which include diameter of round corner in axis, crankpin length and crankweb width and so on to stress focus place were discussed.

同时还探讨了曲轴的部结构参数其应力集中部位的影响，如轴颈过渡圆角半径、曲柄销长度和曲柄臂厚度等。

For the pin and crankweb deep holes, use gas gun to clean chips and show operators in WI.

对于曲柄销及曲柄深孔，必须使用气枪对底铁屑清理干净，在作业指导书明确以图片形式。

The influence of structure parameters which include diameter of round corner in axis, crankpin length and crankweb width and so on to stress focus place were discussed.

时还探讨了曲轴的结构参数对其应力集的影响，如轴颈过渡圆角半径、曲柄销长度和曲柄臂厚度等。

For the pin and crankweb deep holes, use gas gun to clean chips and show operators in WI.

对于曲柄销及曲柄深孔，必须使用气枪对底部铁屑清理干净，在作业指导书中明确以图片映。

The influence of structure parameters which include diameter of round corner in axis, crankpin length and crankweb width and so on to stress focus place were discussed.

同时还探讨了曲轴部结构参数对其应力集中部响，如轴颈过渡圆角半径、曲柄销长度和曲柄臂厚度等。

For the pin and crankweb deep holes, use gas gun to clean chips and show operators in WI.

对于曲曲深孔，必须使用气枪对底部铁屑清理干净，在作业指导书中明确以图片形式反映。

The influence of structure parameters which include diameter of round corner in axis, crankpin length and crankweb width and so on to stress focus place were discussed.

同时还探讨了曲轴的部结构参数对其应力集中部位的影响，如轴颈过渡圆角半径、曲长度和曲臂厚度等。

For the pin and crankweb deep holes, use gas gun to clean chips and show operators in WI.

对于销及孔，必须使用气枪对底部铁屑清理干净，在作业指导书中明确以图片形式反映。

The influence of structure parameters which include diameter of round corner in axis, crankpin length and crankweb width and so on to stress focus place were discussed.

同时还探讨了轴的部结构参数对其应力集中部位的影响，如轴颈过渡圆角半径、销长度和臂厚度等。