Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域荡频率和尼有着较大的影响。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应尼合金材料制作工业平缝机伞齿轮代替钢质齿轮。

The damping effect is also affected by pump pressure, volume of air chamber and the prefill pressure in chamber.

改变泵、空包容积和力等参数,对排出液体的脉动衰减有较大影响。

The damping principle of high rise multistorey buildings equipped with suspension-mass pendulums was discussed and their damping performance was investigated.

摘要论述了在高层建筑结构中利悬吊质量摆减震的原理并对其减震性能进行了研究。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流体对圆盘的尼与圆盘面的表面特性相关。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了尼力与动速度、外加电场强度、力等的数学关系，为减器设计参数的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘系统在不同的耦合强度、失谐程度、粘性尼系数、干摩擦强度等系统参数影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变尼控制由于在装置中附加了尼，可以取得比变刚度控制更为有效的减震控制效果。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和尼比是位置深度和剪应变的函数，导出剪切波在土体中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域荡频率和阻尼有着较大的影响。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业平缝机伞齿轮代替钢质齿轮。

The damping effect is also affected by pump pressure, volume of air chamber and the prefill pressure in chamber.

改变泵压、空气包容积和充气压力等参数,对排出液体的脉动衰有较大影响。

The damping principle of high rise multistorey buildings equipped with suspension-mass pendulums was discussed and their damping performance was investigated.

摘要论述了在高层建筑结中利用悬吊质量摆震的原理并对其震性能进行了研究。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流体对圆盘的阻尼与圆盘面的表面特性相关。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了阻尼力与动速度、外加电场强度、充气压力等的数学关系，为器设计参数的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘系统在不同的耦合强度、失谐程度、粘性阻尼系数、干摩擦强度等系统参数影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变阻尼控制由于在装置中附加了阻尼，可以取得比变刚度控制更为有效的震控制效果。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和阻尼比是位置深度和剪应变的函数，导出剪切波在土体中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域荡频率和有着较大的影响。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用合制作工业平缝机伞齿轮代替钢质齿轮。

The damping effect is also affected by pump pressure, volume of air chamber and the prefill pressure in chamber.

改变泵压、空气包容积和充气压力等参,对排出液体的脉动衰减有较大影响。

The damping principle of high rise multistorey buildings equipped with suspension-mass pendulums was discussed and their damping performance was investigated.

摘要论述了在高层建筑结构中利用悬吊质量摆减震的原理并对其减震性能进行了研究。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流体对圆盘的与圆盘面的表面特性相关。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了力与动速度、外加电场强度、充气压力等的学关系，为减器设计参的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘系统在不同的耦合强度、失谐程度、粘性系、干摩擦强度等系统参影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变控制由于在装置中附加了，可以取得比变刚度控制更为有效的减震控制效果。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和比是位置深度和剪应变的函，导出剪切波在土体中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域荡频率阻有着较大的影响。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻合金材料制作工业平缝机伞齿轮代替钢质齿轮。

The damping effect is also affected by pump pressure, volume of air chamber and the prefill pressure in chamber.

改变泵压、空气包充气压力等参,对排出液体的脉动衰减有较大影响。

The damping principle of high rise multistorey buildings equipped with suspension-mass pendulums was discussed and their damping performance was investigated.

摘要论述了在高层建筑结构中利用悬吊质量摆减震的原理并对其减震性能进行了研究。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流体对圆盘的阻与圆盘面的表面特性相关。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了阻力与动速度、外加电场强度、充气压力等的学关，为减器设计参的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘统在不同的耦合强度、失谐程度、粘性阻、干摩擦强度等统参影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变阻控制由于在装置中附加了阻，可以取得比变刚度控制更为有效的减震控制效果。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量阻比是位置深度剪应变的函，导出剪切波在土体中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域荡频率有着较大的影响。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用合金材料制作工业平缝机伞齿轮代替钢质齿轮。

The damping effect is also affected by pump pressure, volume of air chamber and the prefill pressure in chamber.

改变泵压、空包容积压力等参数,对排出液体的脉动衰减有较大影响。

The damping principle of high rise multistorey buildings equipped with suspension-mass pendulums was discussed and their damping performance was investigated.

摘要论述了在高层建筑结构中利用悬吊质量摆减震的原理并对其减震性能进行了研究。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流体对圆盘的与圆盘面的表面特性相关。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了力与动速度、外加电场强度、压力等的数学关系，为减器设计参数的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘系统在不同的耦合强度、失谐程度、粘性系数、干摩擦强度等系统参数影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变控制由于在装置中附加了，可以取得比变刚度控制更为有效的减震控制效果。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量比是位置深度剪应变的函数，导出剪切波在土体中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域荡频率和有着较大的影响。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用合金材料制作工业平缝机伞齿轮代替钢质齿轮。

The damping effect is also affected by pump pressure, volume of air chamber and the prefill pressure in chamber.

改变泵压、空积和充压力等参,对排出液体的脉动衰减有较大影响。

The damping principle of high rise multistorey buildings equipped with suspension-mass pendulums was discussed and their damping performance was investigated.

摘要论述了在高层建筑结构中利用悬吊质量摆减震的原理并对其减震性能进行了研究。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流体对圆盘的与圆盘面的表面特性相关。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了力与动速度、外加电场强度、充压力等的学关系，为减器设计参的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘系统在不同的耦合强度、失谐程度、粘性系、干摩擦强度等系统参影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变控制由于在装置中附加了，可以取得比变刚度控制更为有效的减震控制效果。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和比是位置深度和剪应变的函，导出剪切波在土体中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域荡频率和有着较大的影响。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用合金材料制作工业平缝机伞齿轮代替钢质齿轮。

The damping effect is also affected by pump pressure, volume of air chamber and the prefill pressure in chamber.

改变泵压、空气包容积和充气压力等参数,对排出液体的脉动衰减有较大影响。

The damping principle of high rise multistorey buildings equipped with suspension-mass pendulums was discussed and their damping performance was investigated.

摘要论述了在高层建筑结构中利用悬吊质量摆减震的原理并对其减震性能进行了研究。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流体对圆盘的与圆盘面的表面特性相关。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了力与动速度、外加电场强度、充气压力等的数学关系，为减器设计参数的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘系统在不同的耦合强度、失谐程度、粘性系数、干摩擦强度等系统参数影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变控制由于在中附加了，可以取得比变刚度控制更为有效的减震控制效果。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和比是位深度和剪应变的函数，导出剪切波在土体中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域荡频和阻尼有着较大的影响。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业平缝机伞齿轮代替钢质齿轮。

The damping effect is also affected by pump pressure, volume of air chamber and the prefill pressure in chamber.

压、空气包容积和充气压力等参数,对排出液体的脉动有较大影响。

The damping principle of high rise multistorey buildings equipped with suspension-mass pendulums was discussed and their damping performance was investigated.

摘要论述了在高层建筑结构中利用悬吊质量摆震的原理并对其震性能进行了研究。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流体对圆盘的阻尼与圆盘面的表面特性相关。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了阻尼力与动速度、外加电场强度、充气压力等的数学关系，为器设计参数的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘系统在不同的耦合强度、失谐程度、粘性阻尼系数、干摩擦强度等系统参数影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与刚度控制相比，刚度阻尼控制由于在装置中附加了阻尼，可以取得比刚度控制更为有效的震控制效果。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和阻尼比是位置深度和剪应的函数，导出剪切波在土体中传播的波动方程。

Generator inertia has great influence on interarea oscillation frequency and damping.

机组的惯量对区域荡频率和有着较大的影响。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用合金材料制作工业平缝机伞齿轮代替钢质齿轮。

The damping effect is also affected by pump pressure, volume of air chamber and the prefill pressure in chamber.

改变泵压、空气包容积和充气压力等参数,对排出液体的脉动衰减有较大影响。

The damping principle of high rise multistorey buildings equipped with suspension-mass pendulums was discussed and their damping performance was investigated.

摘要论述了在高层建筑结构中利用悬吊质量摆减震的原理并对其减震性能进行了研究。

It was found that the damping of microfluid acting on the disk is correlative with surface characteristics of the disk.

微流体对圆盘的与圆盘面的表面特性相关。

Applying the theory of rheodynamics and hydraulic theory, a relationship of damping vs. vibration velocity, electric field strength and gas-filled pressure has been set up.

分析了力与动速度、外加电场强度、充气压力等的数学关系，为减器设计参数的优化研究提供了理论依据。

Features of forced response of the mistuned bladed disk under different system parameters like coupling degree, mistuning strength, viscous damping and non-linear friction strength were investigated.

研究失谐叶盘系统在不同的耦合强度、失谐程度、粘性系数、干摩擦强度等系统参数影响下的受迫响应特性。

The semiactive variable stiffness and damping control device outperforms the semiactive variable stiffness control as the result of the presence of auxiliary damping in this device.

与变刚度控制相比，变刚度变控制由于在装置中附加了，可以取得比变刚度控制更为有效的减震控制效果。

In the CGSM, shear modulus and damping ratio of the soil are functions of depth and shear strain, wave equation for the transmission of shear wave is obtained.

在连续梯度土介质模型中，剪切模量和比是位置深度和剪应变的函数，导出剪切波在土体中传播的波动方程。