The mountain biker adjusted his gears to climb the steep trail.

山地行车手整齿轮以攀爬陡峭的小路。

Gear lubricants may congeal and channel in cold weather.

天气冷时齿轮润滑油可能凝而形成凹槽。

An idea of crossrail and geaxbox maintenance and electric system renovation for HD12.5 planer.

介绍了HD12.5龙门刨床横梁、齿轮箱修理及电气系统改造方案。

The teeth on the gears mesh as they turn round.

转动时齿轮上的齿与齿相啮。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化建模方法。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、轴承、联轴器、齿轮箱是抄纸机的典型部件。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼金材料制作工业平缝机伞齿轮代替钢质齿轮。

Research and design for self-aligning device with terminal small gear driving for calcinatory of certain factory correlative task.

摘课题研究，对某厂煅炉传动末级小齿轮装置进行了设计研究。

Ratching in roving.

粗纱成形齿轮。

The cogs gear smoothly.

齿轮啮得很好。

The rope fouled the gears.

绳把齿轮缠住了。

Gear must be properly lubricated.

齿轮必须适当地加油润滑。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘采用扫描电镜、低倍检验、金相检验、力学试验和化学分析等方法，分析了人字齿轮轴发生劈裂的原因。

The shaving stock of preshaving gears has direct influence on the shaving effect and the tooth profile of preshaving cutters.

剃前齿轮的留剃量形式直接影响剃齿效果及剃前刀具齿形。

For spoiled gears,scene of production demand accurate and quick determination on its modulus so as to co figurate another one.

对于损坏齿轮,生产现场求准确、快速地确定其模数以便及时配制。

In the computation, considering the influence of all of joggle parameter, adopting compound-aitch optimization and intellective distinguish can prevail more reasonable joggle parameter.

传统的多级齿轮传动设计浪费了材料的一部分承载能力,单目标的啮参数优化方法精确度不够。

Nail head thermocompressor transmission design, combined with gear box-type and the advantages of a chain of driving on the easy-to-repair, maintenance, low-efficiency drive failure rate.

钉头复式传动设计，齿轮箱式及链条式传动的优点易于维修、保养，故障率低高效传动。

The statue of General Sedgwick, cast from cannons captured by the VI Corps which he commanded during the Civil War, has rowel spurs that turn.

塞吉维克的塑像由一门他在内战中领导的六团缴获的大炮浇铸而成，周围是马刺上的小齿轮。

When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.

提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能的主动设计方法，并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综。

In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.

很多进口机械中应用了交错轴非渐开线变厚齿轮传动,目前国内在该领域的研究还是空白。

The mountain biker adjusted his gears to climb the steep trail.

山地自行车手调整以攀爬陡峭的小路。

Gear lubricants may congeal and channel in cold weather.

天气冷时润滑油可能凝结而形成凹槽。

An idea of crossrail and geaxbox maintenance and electric system renovation for HD12.5 planer.

介绍了HD12.5龙门刨床横梁、箱修理及电气系统改造方案。

The teeth on the gears mesh as they turn round.

转动时上的与相合。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥的参数化建模方法。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、轴承、联轴器、箱是抄纸机的典型部件。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材工业平缝机伞代替钢质。

Research and design for self-aligning device with terminal small gear driving for calcinatory of certain factory correlative task.

摘要结合课题研究，对某厂煅炉传动末级小自调位装置进行了设计研究。

Ratching in roving.

粗纱成形。

The cogs gear smoothly.

合得很好。

The rope fouled the gears.

绳把缠住了。

Gear must be properly lubricated.

必须适当地加油润滑。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍检验、金相检验、力学试验和化学分析等方法，分析了人字轴发生劈裂的原因。

The shaving stock of preshaving gears has direct influence on the shaving effect and the tooth profile of preshaving cutters.

剃前的留剃量形式直接影响剃效果及剃前刀具形。

For spoiled gears,scene of production demand accurate and quick determination on its modulus so as to co figurate another one.

对于损坏,生产现场要求准确、快速地确定其模数以便及时配。

In the computation, considering the influence of all of joggle parameter, adopting compound-aitch optimization and intellective distinguish can prevail more reasonable joggle parameter.

传统的多级传动设计浪费了材的一部分承载能力,单目标的合参数优化方法精确度不够。

Nail head thermocompressor transmission design, combined with gear box-type and the advantages of a chain of driving on the easy-to-repair, maintenance, low-efficiency drive failure rate.

钉头复合式传动设计，结合箱式及链条式传动的优点易于维修、保养，故障率低高效传动。

The statue of General Sedgwick, cast from cannons captured by the VI Corps which he commanded during the Civil War, has rowel spurs that turn.

塞吉维克的塑像由一门他在内战中领导的六团缴获的大炮浇铸而成，周围是马刺上的小。

When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.

提出了一种在初始设计阶段就可保证弧锥具有预期加载接触性能的主动设计方法，并将其用于某航空发动机中央传动弧锥的面综合。

In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.

很多进口机械中应用了交错轴非渐开线变厚传动,目前国内在该领域的研究还是空白。

The mountain biker adjusted his gears to climb the steep trail.

山地自行车手调整齿轮以攀爬陡峭的小路。

Gear lubricants may congeal and channel in cold weather.

天气冷时齿轮润滑油可能凝结而形成凹槽。

An idea of crossrail and geaxbox maintenance and electric system renovation for HD12.5 planer.

介绍了HD12.5龙门刨床横梁、齿轮箱修理及电气系统改造方案。

The teeth on the gears mesh as they turn round.

转时齿轮上的齿与齿相啮合。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化建模方法。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、轴承、联轴器、齿轮箱是抄纸机的典型部件。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业平缝机伞齿轮代替钢质齿轮。

Research and design for self-aligning device with terminal small gear driving for calcinatory of certain factory correlative task.

摘要结合课题研，厂煅炉传小齿轮自调位装置进行了设计研。

Ratching in roving.

粗纱成形齿轮。

The cogs gear smoothly.

齿轮啮合得很好。

The rope fouled the gears.

绳把齿轮缠住了。

Gear must be properly lubricated.

齿轮必须适当地加油润滑。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍检验、金相检验、力学试验和化学分析等方法，分析了人字齿轮轴发生劈裂的原因。

The shaving stock of preshaving gears has direct influence on the shaving effect and the tooth profile of preshaving cutters.

剃前齿轮的留剃量形式直接影响剃齿效果及剃前刀具齿形。

For spoiled gears,scene of production demand accurate and quick determination on its modulus so as to co figurate another one.

于损坏齿轮,生产现场要求准确、快速地确定其模数以便及时配制。

In the computation, considering the influence of all of joggle parameter, adopting compound-aitch optimization and intellective distinguish can prevail more reasonable joggle parameter.

传统的多齿轮传设计浪费了材料的一部分承载能力,单目标的啮合参数优化方法精确度不够。

Nail head thermocompressor transmission design, combined with gear box-type and the advantages of a chain of driving on the easy-to-repair, maintenance, low-efficiency drive failure rate.

钉头复合式传设计，结合齿轮箱式及链条式传的优点易于维修、保养，故障率低高效传。

The statue of General Sedgwick, cast from cannons captured by the VI Corps which he commanded during the Civil War, has rowel spurs that turn.

塞吉维克的塑像由一门他在内战中领导的六团缴获的大炮浇铸而成，周围是马刺上的小齿轮。

When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.

提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能的主设计方法，并将其用于航空发机中央传弧齿锥齿轮的齿面综合。

In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.

很多进口机械中应用了交错轴非渐开线变厚齿轮传,目前国内在该领域的研还是空白。

The mountain biker adjusted his gears to climb the steep trail.

山地自行车手调整齿以攀爬陡峭的小路。

Gear lubricants may congeal and channel in cold weather.

天气冷时齿油可能凝结而形成凹槽。

An idea of crossrail and geaxbox maintenance and electric system renovation for HD12.5 planer.

介绍了HD12.5龙门刨床横梁、齿箱修理及电气系统改造方案。

The teeth on the gears mesh as they turn round.

转动时齿上的齿与齿相啮合。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿的参数化建模方法。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、轴承、联轴器、齿箱是抄纸机的典型部件。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业平缝机伞齿代替钢质齿。

Research and design for self-aligning device with terminal small gear driving for calcinatory of certain factory correlative task.

摘要结合课题研究，对某厂煅炉传动末级小齿自调位装置进行了设计研究。

Ratching in roving.

粗纱成形齿。

The cogs gear smoothly.

齿啮合得很好。

The rope fouled the gears.

绳把齿缠住了。

Gear must be properly lubricated.

齿必须适当地加油。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍检验、金相检验、力学试验和化学分析等方法，分析了人字齿轴发劈裂的原因。

The shaving stock of preshaving gears has direct influence on the shaving effect and the tooth profile of preshaving cutters.

剃前齿的留剃量形式直接影响剃齿效果及剃前刀具齿形。

For spoiled gears,scene of production demand accurate and quick determination on its modulus so as to co figurate another one.

对于损坏齿,现场要求准确、快速地确定其模数以便及时配制。

In the computation, considering the influence of all of joggle parameter, adopting compound-aitch optimization and intellective distinguish can prevail more reasonable joggle parameter.

传统的多级齿传动设计浪费了材料的一部分承载能力,单目标的啮合参数优化方法精确度不够。

Nail head thermocompressor transmission design, combined with gear box-type and the advantages of a chain of driving on the easy-to-repair, maintenance, low-efficiency drive failure rate.

钉头复合式传动设计，结合齿箱式及链条式传动的优点易于维修、保养，故障率低高效传动。

The statue of General Sedgwick, cast from cannons captured by the VI Corps which he commanded during the Civil War, has rowel spurs that turn.

塞吉维克的塑像由一门他在内战中领导的六团缴获的大炮浇铸而成，周围是马刺上的小齿。

When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.

提出了一种在初始设计阶段就可保证弧齿锥齿具有预期加载接触性能的主动设计方法，并将其用于某航空发动机中央传动弧齿锥齿的齿面综合。

In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.

很多进口机械中应用了交错轴非渐开线变厚齿传动,目前国内在该领域的研究还是空白。

The mountain biker adjusted his gears to climb the steep trail.

山地自行车手调整齿以攀爬陡峭的小路。

Gear lubricants may congeal and channel in cold weather.

天气冷时齿润滑油可能凝结而形成凹槽。

An idea of crossrail and geaxbox maintenance and electric system renovation for HD12.5 planer.

介绍了HD12.5龙门刨床横梁、齿箱修理及电气系统改造方案。

The teeth on the gears mesh as they turn round.

转时齿上的齿与齿相啮合。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿的参数化建模方法。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、轴承、联轴器、齿箱是抄纸机的典型部件。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业平缝机伞齿代替钢质齿。

Research and design for self-aligning device with terminal small gear driving for calcinatory of certain factory correlative task.

摘要结合课题研究，对某厂煅炉末级小齿自调位装置进行了设计研究。

Ratching in roving.

粗纱成形齿。

The cogs gear smoothly.

齿啮合得很好。

The rope fouled the gears.

绳把齿缠住了。

Gear must be properly lubricated.

齿必须适当地加油润滑。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍检验、金相检验、力学试验和化学分析等方法，分析了人字齿轴发生劈裂的原因。

The shaving stock of preshaving gears has direct influence on the shaving effect and the tooth profile of preshaving cutters.

剃前齿的留剃量形式直接影响剃齿效果及剃前刀具齿形。

For spoiled gears,scene of production demand accurate and quick determination on its modulus so as to co figurate another one.

对于损坏齿,生产现场要求准确、快速地确定其模数以便及时配制。

In the computation, considering the influence of all of joggle parameter, adopting compound-aitch optimization and intellective distinguish can prevail more reasonable joggle parameter.

统的多级齿设计浪费了材料的一部分承载能力,单目标的啮合参数优化方法精确度不够。

Nail head thermocompressor transmission design, combined with gear box-type and the advantages of a chain of driving on the easy-to-repair, maintenance, low-efficiency drive failure rate.

钉头复合式设计，结合齿箱式及链条式的优点易于维修、保养，故障率低高效。

The statue of General Sedgwick, cast from cannons captured by the VI Corps which he commanded during the Civil War, has rowel spurs that turn.

塞吉维克的塑像由一门他在内战中领导的六团缴获的大炮浇铸而成，周围是马刺上的小齿。

When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.

提出了一种在初始设计阶段就可保证弧齿锥齿具有预期加载接触性能的主设计方法，并将其用于某航空发机中央弧齿锥齿的齿面综合。

In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.

很多进口机械中应用了交错轴非渐开线变厚齿,目前国内在该领域的研究还是空白。

The mountain biker adjusted his gears to climb the steep trail.

山地自行车手调整齿轮以攀爬陡峭的小路。

Gear lubricants may congeal and channel in cold weather.

天气冷时齿轮润滑油可能凝结而形成凹槽。

An idea of crossrail and geaxbox maintenance and electric system renovation for HD12.5 planer.

介绍了HD12.5龙门刨床横梁、齿轮箱修理及电气系统改造方案。

The teeth on the gears mesh as they turn round.

转动时齿轮上的齿与齿相啮合。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆锥齿轮的参数化建模方法。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、轴承、联轴器、齿轮箱是抄纸机的典型部件。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业平缝机伞齿轮代替钢质齿轮。

Research and design for self-aligning device with terminal small gear driving for calcinatory of certain factory correlative task.

摘要结合课题研究，对某厂煅炉传动末级小齿轮自调位装置进行了设计研究。

Ratching in roving.

粗纱成形齿轮。

The cogs gear smoothly.

齿轮啮合得很好。

The rope fouled the gears.

绳把齿轮缠住了。

Gear must be properly lubricated.

齿轮必须适当地加油润滑。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍检、金相检、试和化分析等方法，分析了人字齿轮轴发生劈裂的原因。

The shaving stock of preshaving gears has direct influence on the shaving effect and the tooth profile of preshaving cutters.

剃前齿轮的留剃量形式直接影响剃齿效果及剃前刀具齿形。

For spoiled gears,scene of production demand accurate and quick determination on its modulus so as to co figurate another one.

对于损坏齿轮,生产现场要求准确、快速地确定其模数以便及时配制。

In the computation, considering the influence of all of joggle parameter, adopting compound-aitch optimization and intellective distinguish can prevail more reasonable joggle parameter.

传统的多级齿轮传动设计浪费了材料的一部分承载能,单目标的啮合参数优化方法精确度不够。

Nail head thermocompressor transmission design, combined with gear box-type and the advantages of a chain of driving on the easy-to-repair, maintenance, low-efficiency drive failure rate.

钉头复合式传动设计，结合齿轮箱式及链条式传动的优点易于维修、保养，故障率低高效传动。

The statue of General Sedgwick, cast from cannons captured by the VI Corps which he commanded during the Civil War, has rowel spurs that turn.

塞吉维克的塑像由一门他在内战中领导的六团缴获的大炮浇铸而成，周围是马刺上的小齿轮。

When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.

提出了一种在初始设计阶段就可保证齿锥齿轮具有预期加载接触性能的主动设计方法，并将其用于某航空发动机中央传动齿锥齿轮的齿面综合。

In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.

很多进口机械中应用了交错轴非渐开线变厚齿轮传动,目前国内在该领域的研究还是空白。

The mountain biker adjusted his gears to climb the steep trail.

山地自行车手调整以攀爬陡峭的小路。

Gear lubricants may congeal and channel in cold weather.

天气冷时润滑油可能凝结而成凹槽。

An idea of crossrail and geaxbox maintenance and electric system renovation for HD12.5 planer.

介绍了HD12.5龙门刨床横梁、箱修理及电气系统改造方案。

The teeth on the gears mesh as they turn round.

转动时上的与相啮合。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥的参数化建模方法。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、轴承、联轴器、箱是抄纸机的典型部件。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作业缝机伞代替钢质。

Research and design for self-aligning device with terminal small gear driving for calcinatory of certain factory correlative task.

摘要结合课题研究，对某厂煅炉传动末级小自调位装置进行了设计研究。

Ratching in roving.

粗纱成。

The cogs gear smoothly.

啮合得很好。

The rope fouled the gears.

绳把缠住了。

Gear must be properly lubricated.

必须适当地加油润滑。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍检验、金相检验、力学试验和化学分析等方法，分析了人字轴发生劈裂的原因。

The shaving stock of preshaving gears has direct influence on the shaving effect and the tooth profile of preshaving cutters.

剃前的留剃量式直接影响剃效果及剃前刀具。

For spoiled gears,scene of production demand accurate and quick determination on its modulus so as to co figurate another one.

对于损坏,生产现场要求准确、快速地确定其模数以便及时配制。

In the computation, considering the influence of all of joggle parameter, adopting compound-aitch optimization and intellective distinguish can prevail more reasonable joggle parameter.

传统的多级传动设计浪费了材料的一部分承载能力,单目标的啮合参数优化方法精确度不够。

Nail head thermocompressor transmission design, combined with gear box-type and the advantages of a chain of driving on the easy-to-repair, maintenance, low-efficiency drive failure rate.

钉头复合式传动设计，结合箱式及链条式传动的优点易于维修、保养，故障率低高效传动。

The statue of General Sedgwick, cast from cannons captured by the VI Corps which he commanded during the Civil War, has rowel spurs that turn.

塞吉维克的塑像由一门他在内战中领导的六团缴获的大炮浇铸而成，周围是马刺上的小。

When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.

提出了一种在初始设计阶段就可保证弧锥具有预期加载接触性能的主动设计方法，并将其用于某航空发动机中央传动弧锥的面综合。

In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.

很多进口机械中应用了交错轴非渐开线变厚传动,目前国内在该领域的研究还是空白。

The mountain biker adjusted his gears to climb the steep trail.

山地自行车手调整轮以攀爬陡峭的路。

Gear lubricants may congeal and channel in cold weather.

天气冷时轮润滑油可能凝结而形成凹槽。

An idea of crossrail and geaxbox maintenance and electric system renovation for HD12.5 planer.

介绍了HD12.5龙门刨床横梁、轮箱修理及电气系统改造方案。

The teeth on the gears mesh as they turn round.

转动时轮上的与相啮合。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥轮的参数化建模方法。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、轴承、联轴器、轮箱是抄纸机的典型部件。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业平缝机伞轮代替钢质轮。

Research and design for self-aligning device with terminal small gear driving for calcinatory of certain factory correlative task.

摘要结合课，对某厂煅炉传动末轮自调位装置进行了设计。

Ratching in roving.

粗纱成形轮。

The cogs gear smoothly.

轮啮合得很好。

The rope fouled the gears.

绳把轮缠住了。

Gear must be properly lubricated.

轮必须适当地加油润滑。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍检验、金相检验、力学试验和化学分析等方法，分析了人字轮轴发生劈裂的原因。

The shaving stock of preshaving gears has direct influence on the shaving effect and the tooth profile of preshaving cutters.

剃前轮的留剃量形式直接影响剃效果及剃前刀具形。

For spoiled gears,scene of production demand accurate and quick determination on its modulus so as to co figurate another one.

对于损坏轮,生产现场要求准确、快速地确定其模数以便及时配制。

In the computation, considering the influence of all of joggle parameter, adopting compound-aitch optimization and intellective distinguish can prevail more reasonable joggle parameter.

传统的多轮传动设计浪费了材料的一部分承载能力,单目标的啮合参数优化方法精确度不够。

Nail head thermocompressor transmission design, combined with gear box-type and the advantages of a chain of driving on the easy-to-repair, maintenance, low-efficiency drive failure rate.

钉头复合式传动设计，结合轮箱式及链条式传动的优点易于维修、保养，故障率低高效传动。

The statue of General Sedgwick, cast from cannons captured by the VI Corps which he commanded during the Civil War, has rowel spurs that turn.

塞吉维克的塑像由一门他在内战中领导的六团缴获的大炮浇铸而成，周围是马刺上的轮。

When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.

提出了一种在初始设计阶段就可保证弧锥轮具有预期加载接触性能的主动设计方法，并将其用于某航空发动机中央传动弧锥轮的面综合。

In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.

很多进口机械中应用了交错轴非渐开线变厚轮传动,目前国内在该领域的还是空白。

The mountain biker adjusted his gears to climb the steep trail.

山自行车手调整齿轮以攀的小路。

Gear lubricants may congeal and channel in cold weather.

天气冷时齿轮润滑油可能凝结而形成凹槽。

An idea of crossrail and geaxbox maintenance and electric system renovation for HD12.5 planer.

介绍了HD12.5龙门刨床横梁、齿轮箱修理及电气系统改造方案。

The teeth on the gears mesh as they turn round.

转动时齿轮上的齿与齿相啮合。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化建模方法。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、轴承、联轴器、齿轮箱是抄纸机的典型部件。

Make the bevel gears of the industrial sewingmachine with damping alloy instead of steel to test noise.

应用阻尼合金材料制作工业平缝机伞齿轮代替钢质齿轮。

Research and design for self-aligning device with terminal small gear driving for calcinatory of certain factory correlative task.

摘要结合课题研究，对某厂煅炉传动末级小齿轮自调位装置进行了设计研究。

Ratching in roving.

粗纱成形齿轮。

The cogs gear smoothly.

齿轮啮合得很好。

The rope fouled the gears.

绳把齿轮缠住了。

Gear must be properly lubricated.

齿轮必须适当加油润滑。

The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

摘要采用扫描电镜、低倍检验、金相检验、力学试验和化学分析等方法，分析了人字齿轮轴发生劈裂的原因。

The shaving stock of preshaving gears has direct influence on the shaving effect and the tooth profile of preshaving cutters.

剃前齿轮的留剃量形式直接影响剃齿效果及剃前刀具齿形。

For spoiled gears,scene of production demand accurate and quick determination on its modulus so as to co figurate another one.

对于损坏齿轮,生产现场要求准、快速其模数以便及时配制。

In the computation, considering the influence of all of joggle parameter, adopting compound-aitch optimization and intellective distinguish can prevail more reasonable joggle parameter.

传统的多级齿轮传动设计浪费了材料的一部分承载能力,单目标的啮合参数优化方法精度不够。

Nail head thermocompressor transmission design, combined with gear box-type and the advantages of a chain of driving on the easy-to-repair, maintenance, low-efficiency drive failure rate.

钉头复合式传动设计，结合齿轮箱式及链条式传动的优点易于维修、保养，故障率低高效传动。

The statue of General Sedgwick, cast from cannons captured by the VI Corps which he commanded during the Civil War, has rowel spurs that turn.

塞吉维克的塑像由一门他在内战中领导的六团缴获的大炮浇铸而成，周围是马刺上的小齿轮。

When this method is applied to the spiral bevel gears of an airplane engine, the results show that it is more reasonable than TCA and the precontrol method.

提出了一种在初始设计阶段就可保证弧齿锥齿轮具有预期加载接触性能的主动设计方法，并将其用于某航空发动机中央传动弧齿锥齿轮的齿面综合。

In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.

很多进口机械中应用了交错轴非渐开线变厚齿轮传动,目前国内在该领域的研究还是空白。