These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造的。

The government has decided to coin more one-yuan pieces.

政府决定再铸造一些一元的硬币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型的方法。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的铜器，所需当在1000千克以上，且必须有较大的熔炉。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁合微孔的组织形态形机理符合气体形模型和溶质再配理论,从而验证氢气析出形显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微、扫描电析手段对K18合增压器涡轮铸造叶片的断裂形貌与断裂机制进行了析。

Even the word coin, translates from the Latin "cuneus," meaning wedge, and was thusly named because early coins ressembled the wedges the dies used to coin coins.

甚至“coin”(硬币)一词，是从拉丁文“cuneus”翻译过来的，意思是“楔子”。之所以称之为“楔子”，是由于早期的硬币与用来铸造硬币的楔形模具很相似。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造的。

The government has decided to coin more one-yuan pieces.

政府铸造一些一元的硬币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型的方法。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的铜器，所需金属料当在1000千克以上，且必须有较大的熔炉。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁合金微孔的组织形态形机理符合气体形模型和溶质分配理论,从而验证氢气析出形显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片的断裂形貌与断裂机制等进行了分析。

Even the word coin, translates from the Latin "cuneus," meaning wedge, and was thusly named because early coins ressembled the wedges the dies used to coin coins.

甚至“coin”(硬币)一词，是从拉丁“cuneus”过来的，意思是“楔子”。之所以称之为“楔子”，是由于早期的硬币与用来铸造硬币的楔形模具很相似。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造。

The government has decided to coin more one-yuan pieces.

政府决定再铸造一些一元硬币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型方法。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高器，所需属料当在1000千克以上，且必须有较熔炉。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁微孔组织形态形机理符气体形模型和溶质再分配理论,从而验证氢气析出形显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微镜、扫描电镜等分析手段K18增压器涡轮铸造叶片断裂形貌与断裂机制等进行了分析。

Even the word coin, translates from the Latin "cuneus," meaning wedge, and was thusly named because early coins ressembled the wedges the dies used to coin coins.

甚至“coin”(硬币)一词，是从拉丁文“cuneus”翻译过来，意思是“楔子”。之所以称之为“楔子”，是由于早期硬币与用来铸造硬币楔形模具很相似。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机研制功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造的。

The government has decided to coin more one-yuan pieces.

政府决定铸造一些一元的硬币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型的方法。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的铜器，所需金属料当在1000千克以上，且必须有较大的熔炉。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁金微孔的组织形态形机气体形模型和分配论,从而验证氢气析出形显微气孔机。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微镜、扫描电镜等分析手段对K18金增压器涡轮铸造叶片的断裂形貌与断裂机制等进行了分析。

Even the word coin, translates from the Latin "cuneus," meaning wedge, and was thusly named because early coins ressembled the wedges the dies used to coin coins.

甚至“coin”(硬币)一词，是从拉丁文“cuneus”翻译过来的，意思是“楔子”。之所以称之为“楔子”，是由于早期的硬币与用来铸造硬币的楔形模具很相似。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造的。

The government has decided to coin more one-yuan pieces.

政府决定再铸造一些一元的硬币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂的方法。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的铜器，所需金属料当在1000千克以上，且必须有较大的熔炉。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁合金微孔的组织态机理符合气和溶质再分配理论,从而验证氢气析出显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片的断裂貌与断裂机制等进行了分析。

Even the word coin, translates from the Latin "cuneus," meaning wedge, and was thusly named because early coins ressembled the wedges the dies used to coin coins.

甚至“coin”(硬币)一词，是从拉丁文“cuneus”翻译过来的，意思是“楔子”。之所以称之为“楔子”，是由于早期的硬币与用来铸造硬币的楔具很相似。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基不发热、不变、无应力、无硬点及退火情况。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造的。

The government has decided to coin more one-yuan pieces.

政府决定再铸造一些一元的硬币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿制作铸造砂型的方法。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的铜器，所需金属料当在1000千克以上，且必须有较大的熔炉。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁合金微孔的组织形态形机理符合气体形模型和溶质再分配理论,从而验证氢气析出形显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片的形貌机制等进行了分析。

Even the word coin, translates from the Latin "cuneus," meaning wedge, and was thusly named because early coins ressembled the wedges the dies used to coin coins.

甚至“coin”(硬币)一词，是从拉丁文“cuneus”翻译过来的，意思是“楔子”。之所以称之为“楔子”，是由于早期的硬币用来铸造硬币的楔形模具很相似。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造的。

The government has decided to coin more one-yuan pieces.

定再铸造一些一元的硬币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型的方法。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大的铜器，所需金属料当在1000千克以上，且必须有较大的熔炉。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁合金微孔的组织形态形机理符合气体形模型和溶质再分配理论,从而验证氢气析出形显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片的断裂形貌与断裂机制等进行了分析。

Even the word coin, translates from the Latin "cuneus," meaning wedge, and was thusly named because early coins ressembled the wedges the dies used to coin coins.

甚至“coin”(硬币)一词，是从拉丁文“cuneus”翻的，意思是“楔子”。之所以称之为“楔子”，是由于早期的硬币与用铸造硬币的楔形模具很相似。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制功，给铸造缺陷修复带了一次彻底革命！焊补程中基体不发热、不变形、无应力、无硬点及退火情况。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂铸造。

The government has decided to coin more one-yuan pieces.

政府决定再铸造一些一元硬币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制作铸造砂型方法。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样高大铜器，所需金属料当在1000千克以上，且必须有较大熔炉。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

铸造镁合金组织形态形机理符合体形模型和溶质再分配理论,从而验析出形显机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片断裂形貌与断裂机制等进行了分析。

Even the word coin, translates from the Latin "cuneus," meaning wedge, and was thusly named because early coins ressembled the wedges the dies used to coin coins.

甚至“coin”(硬币)一词，是从拉丁文“cuneus”翻译过来，意思是“楔子”。之所以称之为“楔子”，是由于早期硬币与用来铸造硬币楔形模具很相似。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机研制功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

These pennies were coined at the mint in London.

这些便士钱币是伦敦一家制币厂的。

The government has decided to coin more one-yuan pieces.

政府决定再一些一元的硬币。

One method to make casting sand mold directly from the bozzetto(mud-draft) of the sculpture is introduced.

介绍一种在雕塑泥稿外直接制砂型的方法。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

这样高大的铜器，所需金属料当在1000千克以上，且必须有较大的熔炉。

The microporosity morphology and formation mechanism of cast magnesium alloy was investigated with software for analysis percentage of microporosity and field scanning electron microscopy.

镁合金微孔的组织态机理符合气体模型和溶质再分配理论,从而验证氢气析出显微气孔机理。

By means of stereomicroscopy and scanning electronic microscopy(SEM),the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.

采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮叶片的貌与机制等进行了分析。

Even the word coin, translates from the Latin "cuneus," meaning wedge, and was thusly named because early coins ressembled the wedges the dies used to coin coins.

甚至“coin”(硬币)一词，是从拉丁文“cuneus”翻译过来的，意思是“楔子”。之所以称之为“楔子”，是由于早期的硬币与用来硬币的楔模具很相似。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台缺陷修补机的研制功，给缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变、无应力、无硬点及退火情况。