It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.

并提出了改进酸洗、磷、及变形工艺方法。

It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.

用热重分析仪模拟工业程序,建立了铜轧制油清净性评价方法。

They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.

这些用大致涵盖光掺杂、光、光沉积薄膜、光引发固相反光光刻等几方面。

Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.

重点研究了PMOS器件高场效氧层陷阱电子陷阱机制。

Through utilizing controlled cooling technique on large section bearing steel bar after rolling ,an ideal initiation structure sorbide can be attained.

利用快速冷却技术，可以得到球理想预组织──索氏体。

According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.

还可根据用户需要另配在线光亮，内压缝整园等辅助设施。

It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.

有报道称Ti-Ni合金去孪晶力随着温度升高而升高，但是造成这一现象原因并不清楚。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无力、无硬点及情况。

First, the solid ice on the surface could have been annealed, meaning that its temperature could have been raised above the 78 Kelvin mark to allow the amorphous ice to recrystallize.

首先，表面固体冰曾经过，也就是说其温度曾升高至78K以上使无定型冰重新结晶。

It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.

并提出了改进酸洗、磷、退火及变形工艺方法。

It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.

用热重分析工业退火程序,建立了铜轧制油退火清净性评价方法。

They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.

这些应用大致涵盖激光掺杂、激光退火、激光沉积薄膜、激光引发固相反应和激光光刻等几方面。

Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.

重点研究了退PMOS器件场退火效应和氧层陷阱电子退陷阱机制。

Through utilizing controlled cooling technique on large section bearing steel bar after rolling ,an ideal initiation structure sorbide can be attained.

利用快速冷却技术，可以得到球退火理想预组织──索氏体。

According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.

还可根据用户需要另配在线光亮退火，内压缝整园等辅助设施。

It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.

有报道称Ti-Ni合金去孪晶应力随着退火温度而，但是造成这一现象原因并不清楚。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

First, the solid ice on the surface could have been annealed, meaning that its temperature could have been raised above the 78 Kelvin mark to allow the amorphous ice to recrystallize.

首先，表面固体冰曾经退火过，也就是说其温度曾至78K以上使无定型冰重新结晶。

It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.

并提出了改进酸洗、磷、退火及变形工艺的方法。

It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.

用热重分析仪模拟工业退火程序,建立了铜轧制油退火清净性的评价方法。

They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.

这些应用大致涵盖激掺杂、激退火、激沉积薄膜、激引发固相反应和激等几方面。

Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.

重点研究了退PMOS器件的高场退火效应和氧层陷阱电子的退陷阱机制。

Through utilizing controlled cooling technique on large section bearing steel bar after rolling ,an ideal initiation structure sorbide can be attained.

利用快速冷却技术，可以得退火的理想预组织──索氏体。

According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.

还可根据用户需要另配在线亮退火，内压缝整园等辅助设施。

It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.

有报道称Ti-Ni合金的去孪晶应力随着退火温度的升高而升高，但是造成这一现象的原因并不清楚。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

First, the solid ice on the surface could have been annealed, meaning that its temperature could have been raised above the 78 Kelvin mark to allow the amorphous ice to recrystallize.

首先，表面的固体冰曾经退火过，也就是说其温度曾升高至78K以上使无定型冰重新结晶。

It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.

并提出了改进酸洗、磷、退及变形工艺的方法。

It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.

用热重分析仪模拟工业退程序,建立了铜轧制油退性的评价方法。

They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.

这些应用大致涵盖激光掺杂、激光退、激光沉积薄膜、激光引发固相反应和激光光刻等几方面。

Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.

重点研究了退PMOS器件的高场退效应和氧层陷阱电子的退陷阱机制。

Through utilizing controlled cooling technique on large section bearing steel bar after rolling ,an ideal initiation structure sorbide can be attained.

利用快速冷却技术，可以得到球退的理想预组织──索氏体。

According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.

还可根据用户需要另配在线光亮退，内压缝整园等辅助设施。

It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.

有Ti-Ni合金的去孪晶应力随着退温度的升高而升高，但是造成这一现象的原因并不楚。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退情况。

First, the solid ice on the surface could have been annealed, meaning that its temperature could have been raised above the 78 Kelvin mark to allow the amorphous ice to recrystallize.

首先，表面的固体冰曾经退过，也就是说其温度曾升高至78K以上使无定型冰重新结晶。

It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.

并提出了改进酸洗、磷、火及变形工艺的方法。

It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.

用热重分析仪模拟工业火程序,建立了铜轧制油火清净性的评价方法。

They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.

这些应用大致涵盖掺杂、火、沉积薄膜、引发固相反应和刻等几方面。

Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.

重点研究了PMOS器件的高场火效应和氧层陷阱电子的陷阱机制。

Through utilizing controlled cooling technique on large section bearing steel bar after rolling ,an ideal initiation structure sorbide can be attained.

利用快速冷却技术，可以得到球火的理想预组织──索氏体。

According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.

还可根据用户配在线亮火，内压缝整园等辅助设施。

It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.

有报道称Ti-Ni合金的去孪晶应力随着火温度的升高而升高，但是造成这一现象的原因并不清楚。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及火情况。

First, the solid ice on the surface could have been annealed, meaning that its temperature could have been raised above the 78 Kelvin mark to allow the amorphous ice to recrystallize.

首先，表面的固体冰曾经火过，也就是说其温度曾升高至78K以上使无定型冰重新结晶。

It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.

并提出了改进酸洗、磷、退火及变形工艺的方法。

It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.

热重分析仪模拟工业退火程序,建立了铜轧制油退火清净性的评价方法。

They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.

这些应大致涵盖掺杂、退火、积薄膜、引发固相反应和刻等几方面。

Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.

重点研究了退PMOS器件的高场退火效应和氧层陷阱电子的退陷阱机制。

Through utilizing controlled cooling technique on large section bearing steel bar after rolling ,an ideal initiation structure sorbide can be attained.

利快速冷却技术，可以得到球退火的理想预组织──索氏体。

According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.

还可户需要另配在线亮退火，内压缝整园等辅助设施。

It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.

有报道称Ti-Ni合金的去孪晶应力随着退火温度的升高而升高，但是造成这一现象的原因并不清楚。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

First, the solid ice on the surface could have been annealed, meaning that its temperature could have been raised above the 78 Kelvin mark to allow the amorphous ice to recrystallize.

首先，表面的固体冰曾经退火过，也就是说其温度曾升高至78K以上使无定型冰重新结晶。

It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.

并提出了改进酸洗、磷、退火及变形工艺的方法。

It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.

用热重分析仪模拟工业退火,立了铜轧制油退火清净性的评价方法。

They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.

这些应用大致涵盖激光掺杂、激光退火、激光沉积薄膜、激光引发固相反应和激光光刻等几方面。

Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.

重点研究了退PMOS器件的高场退火效应和氧层陷阱电子的退陷阱机制。

Through utilizing controlled cooling technique on large section bearing steel bar after rolling ,an ideal initiation structure sorbide can be attained.

利用快速冷却技术，可以得到球退火的理想预组织──索氏体。

According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.

还可根据用户需要另配在线光亮退火，内压缝整园等辅助设施。

It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.

有报道称Ti-Ni合金的去孪晶应退火温度的升高而升高，但是造成这一现象的原因并不清楚。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过中基体不发热、不变形、无应、无硬点及退火情况。

First, the solid ice on the surface could have been annealed, meaning that its temperature could have been raised above the 78 Kelvin mark to allow the amorphous ice to recrystallize.

首先，表面的固体冰曾经退火过，也就是说其温度曾升高至78K以上使无定型冰重新结晶。

It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.

并提出了改进酸洗、磷、火及变形工艺方法。

It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.

用热重分析仪模拟工业火程序,建立了铜轧制油火清净性评价方法。

They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.

这些应用大致涵盖激光掺杂、激光火、激光沉积薄膜、激光引发固相反应和激光光刻等几方面。

Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.

重点研究了PMOS器件火效应和氧层电子机制。

Through utilizing controlled cooling technique on large section bearing steel bar after rolling ,an ideal initiation structure sorbide can be attained.

利用快速冷却技术，可以得到球火理想预组织──索氏体。

According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.

还可根据用户需要另配在线光亮火，内压缝整园等辅助设施。

It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.

有报道称Ti-Ni合金去孪晶应力随着火温度升而升，但是造成这一现象原因并不清楚。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺修补机研制成功，给铸造缺修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及火情况。

First, the solid ice on the surface could have been annealed, meaning that its temperature could have been raised above the 78 Kelvin mark to allow the amorphous ice to recrystallize.

首先，表面固体冰曾经火过，也就是说其温度曾升至78K以上使无定型冰重新结晶。

It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.

并提出了改进酸洗、磷、退火及变形工艺的方法。

It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.

用热重分析仪模拟工业退火程序,建立了铜轧制油退火清净性的评价方法。

They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.

这些应用大致涵盖激光掺杂、激光退火、激光膜、激光引发固相反应和激光光刻等几方面。

Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.

重点研究了退PMOS器件的高场退火效应和氧层陷阱电子的退陷阱机制。

Through utilizing controlled cooling technique on large section bearing steel bar after rolling ,an ideal initiation structure sorbide can be attained.

利用快速冷却技术，以得到球退火的理想预组织──索氏体。

According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.

据用户需要另配在线光亮退火，内压缝整园等辅助设施。

It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.

有报道称Ti-Ni合金的去孪晶应力随着退火温度的升高而升高，但是造成这一现象的原因并不清楚。

Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及退火情况。

First, the solid ice on the surface could have been annealed, meaning that its temperature could have been raised above the 78 Kelvin mark to allow the amorphous ice to recrystallize.

首先，表面的固体冰曾经退火过，也就是说其温度曾升高至78K以上使无定型冰重新结晶。